Simulation of interaction between high-temperature process and heat emission from electricity system in summer

During the hot summer season, using electricity systems increases the local anthropogenic heat emission, further increasing the temperature. Regarding anthropogenic heat sources, electric energy consumption, heat generation, indoor and outdoor heat transfer, and exchange in buildings play a critical role in the change in the urban thermal environment. Therefore, the Weather Research and Forecasting (WRF) Model was applied in this study to investigate the heat generation from an indoor electricity system and its influence on the outdoor thermal environment. Through the building effect parameterization (BEP) of a multistorey urban canopy scheme, a building energy model (BEM) to increase the influence of indoor air conditioning on the electricity consumption system was proposed. In other words, the BEP+BEM urban canopy parameterization scheme was set. High temperatures and a summer heat wave were simulated as the background weather. The results show that using the BEP+BEM parameterization scheme of indoor and outdoor energy exchange in the WRF model can better simulate the air temperature near the surface layer on a sunny summer. During the day, the turning on the air conditioning and other electrical systems have no obvious effect on the air temperature near the surface layer in the city, whereas at night, the air temperature generally increases by 0.6 ℃, especially in densely populated areas, with a maximum temperature rise of approximately 1.2 ℃ from 22:00 to 23:00. When the indoor air conditioning target temperature is adjusted to 25–27 ℃, the total energy release of the air conditioning system is reduced by 12.66%, and the temperature drops the most from 13:00 to 16:00, with an average of approximately 1 ℃. Further, the denser the building is, the greater the temperature drop.     

Green Measurements for Software Product Based on Sustainability Dimensions

Software is a central component in the modern world and vastly affects the environment’s sustainability. The demand for energy and resource requirements is rising when producing hardware and software units. Literature study reveals that many studies focused on green hardware; however, limited efforts were made in the greenness of software products. Green software products are necessary to solve the issues and problems related to the long-term use of software, especially from a sustainability perspective. Without a proper mechanism for measuring the greenness of a particular software product executed in a specific environment, the mentioned benefits will not be attained. Currently, there are not enough works to address this problem, and the green status of software products is uncertain and unsure. This paper aims to identify the green measurements based on sustainable dimensions in a software product. The second objective is to reveal the relationships between the elements and measurements through empirical study. The study is conducted in two phases. The first phase is the theoretical phase, where the main components, measurements and practices that influence the sustainability of a software product are identified. The second phase is the empirical study that involved 103 respondents in Malaysia investigating current practices of green software in the industrial environment and further identifying the main sustainability dimensions and measurements and their impact on achieving green software products. This study has revealed seven green measurements of software product: Productivity, Usability, Cost Reduction, Employee Support, Energy Efficiency, Resource Efficiency and Tool Support. The relationships are statistically significant, with a significance level of less than 0.01 (p = 0.000). Thus, the hypothesised relationships were all accepted. The contributions of this study revolve around the research perspectives of the measurements to attain a green software product.     

电子渠道用户发展现状浅析——以江苏省广电有线信息网络股份有限公司为例

通过对江苏省全省电子渠道用户的总量和地区分布,分析了电子渠道缴费用户的流失及消费情况,找出了目前电子渠道存在的一些问题,并提出相应的策略。     

基于深度EPG的智能导航平台建设

随着三网融合的大力推进以及双向互动业务的大力开展,运营商使用原有简单的EPG不足以支撑开展更多的增值业务,不能主动为用户推荐节目,不能为运营商带来新的收入机会。作为重要的创新能力支撑系统,介绍了江苏有线智能导航平台的设计与应用,为相关广电运营商提供一定的设计参考。     

面向工程应用的电磁散射特性建模关键问题研究

随着计算电磁学和计算机技术的迅速发展，电磁散射特性建模技术从算法研究向产品化、集成化、工程化发展.文中分析了探测、识别、伪装等实际工程应用中对电磁散射特性建模技术的具体需求，总结了几何建模、网格剖分、电磁计算和模型验证等建模流程中存在的关键问题与解决方式，以及电磁散射建模技术的发展特点.     

计及Spark和属性权重的售电套餐推荐方法

针对电力市场用户群庞大，交易过程中售电套餐选择困难的问题，在Spark环境下设计了一种售电套餐推荐方法，同时也解决了售电套餐推荐过程中在大数据环境下的可扩展性及实时性问题。首先，计算出每个套餐属性的权重值，从而计算得到售电套餐综合相似度。然后，计及用户和套餐两方面提出一种售电套餐推荐方法，实现售电套餐的精准推荐。实验表明，提出的推荐方法能够明显提高推荐的准确度，并且在分布式环境下具有良好的推荐效率和可扩展性。     

基于多尺度双线性卷积神经网络的多角度下车型精细识别

针对多角度下车辆出现一定的尺度变化和形变导致很难被准确识别的问题，提出基于多尺度双线性卷积神经网络（MS-B-CNN）的车型精细识别模型。首先，对双线性卷积神经网络（B-CNN）算法进行改进，提出MS-B-CNN算法对不同卷积层的特征进行了多尺度融合，以提高特征表达能力；此外，还采用基于中心损失函数与Softmax损失函数联合学习的策略，在Softmax损失函数基础上分别对训练集每个类别在特征空间维护一个类中心，在训练过程中新增加样本时，网络会约束样本的分类中心距离，以提高多角度情况下的车型识别的能力。实验结果显示，该车型识别模型在CompCars数据集上的正确率达到了93.63%，验证了模型在多角度情况下的准确性和鲁棒性。     

基于近景摄影测量技术的地下巷道三维建模

对真实矿山整体及其相关现象的统一认识与数字化再现，是数字矿山建设的重要内容，矿山地下巷道的三维建模及可视化又是数字化再现的核心内容。针对传统巷道三维建模方法效率低下、成本高昂的不足，提出了基于近景摄影测量技术的地下巷道三维建模方法。该方法主要采用近景摄影测量立体像对的前方交会原理，使用相机在不同空间位置获得一组同一目标的图像，通过计算图像间的几何约束关系来得到目标表面的三维坐标信息，从而构建拍摄目标的三维模型。该方法首先利用低成本的智能手机照相机对巷道进行多视角近景照片采集；然后利用数字图像建模Context Capture软件对图像数据进行空中三角测量解算，并生成地下巷道点云数据；最后对获取的像片进行特征提取和影像匹配，完成地下巷道三维模型构建。以河南理工大学地下防空洞巷道为试验对象，拍摄了566张像片，像片间的旁向重叠度约80%。试验结果显示，所拍摄目标物的三维模型结构完整，纹理清晰，表明利用近景摄影测量技术构建巷道三维模型具有可行性。     

水体中微塑料的环境影响行为研究进展

微塑料是指一类广泛存在于环境中的粒径小于5mm的塑料颗粒的总称，当其存在于水体环境中，容易吸附其他污染物，影响它们的迁移行为，进而对生态效应产生影响。本文依据水体环境中微塑料的相关研究报道，对微塑料在水环境中的影响行为进行概述。主要从微塑料的物理、化学和生物特性在环境中的变化特性，微塑料与环境中其他污染物质的相互作用关系，以及微塑料及其复合污染体系对水生生物造成的生态效应影响等3个方面对微塑料的环境行为进行总结、归纳与阐述。最后，针对微塑料对水环境中的环境影响效应，提出了今后的研究方向与展望。     

随车起重机伸缩臂截面多目标优化

为了提高某火箭炮弹药装填车随车起重机伸缩臂的结构刚度,减轻结构质量,建立了随车起重机伸缩臂参数化模型,并对伸缩臂在水平受载状态下进行仿真分析。以伸缩臂截面尺寸参数为设计变量,借助最优拉丁超立方试验设计建立样本空间,构造响应面多项式函数近似模型。在此基础上,利用NSGA-Ⅱ型遗传算法对伸缩臂自身重量、挠度进行多目标优化。优化结果表明:伸缩臂质量减轻了24.5%,减重效果明显。文中所采用的将参数化建模、有限元分析和数值寻优相结合的优化方法,可为起重机伸缩臂截面优化提供一定的参考。