Green Measurements for Software Product Based on Sustainability Dimensions

Software is a central component in the modern world and vastly affects the environment’s sustainability. The demand for energy and resource requirements is rising when producing hardware and software units. Literature study reveals that many studies focused on green hardware; however, limited efforts were made in the greenness of software products. Green software products are necessary to solve the issues and problems related to the long-term use of software, especially from a sustainability perspective. Without a proper mechanism for measuring the greenness of a particular software product executed in a specific environment, the mentioned benefits will not be attained. Currently, there are not enough works to address this problem, and the green status of software products is uncertain and unsure. This paper aims to identify the green measurements based on sustainable dimensions in a software product. The second objective is to reveal the relationships between the elements and measurements through empirical study. The study is conducted in two phases. The first phase is the theoretical phase, where the main components, measurements and practices that influence the sustainability of a software product are identified. The second phase is the empirical study that involved 103 respondents in Malaysia investigating current practices of green software in the industrial environment and further identifying the main sustainability dimensions and measurements and their impact on achieving green software products. This study has revealed seven green measurements of software product: Productivity, Usability, Cost Reduction, Employee Support, Energy Efficiency, Resource Efficiency and Tool Support. The relationships are statistically significant, with a significance level of less than 0.01 (p = 0.000). Thus, the hypothesised relationships were all accepted. The contributions of this study revolve around the research perspectives of the measurements to attain a green software product.     

Transesterification of Palm-based Methyl Palmitate into Esteramine Catalyzed by Calcium Oxide Catalyst

The technology for transesterification reactions between methyl esters and alcohols is well established by using classical homogeneous alkaline catalysts, which provide high conversion of methyl esters to specialty or nonindigenous esters. However, in certain products where the purity of the esters is of concern, the removal of homogeneous catalysts after the completion of the reaction is a challenge in terms of production cost and water footprint. Therefore, a study to investigate the potential of heterogeneous catalysts was conducted on reactions between methyl palmitate and triethanolamine. The degree of basicity and active surface area of calcium oxide (CaO), zinc oxide (ZnO), and magnesium oxide (MgO) were first characterized by using temperature-programmed desorption (TPD-CO₂) and Brunauere–Emmett–Teller (BET), respectively. Among the metal oxides investigated, the CaO catalyst showed the best catalytic activity toward the transesterification process as it gave the highest conversion of methyl palmitate and yielded fatty esteramine compositions similar to the conventional homogeneous catalyst. The optimum transesterification condition by using the CaO catalyst utilized a lower vacuum system of approximately 200 mbar, which could minimize a considerable amount of energy consumption. Furthermore, low CaO dosage of 0.1% was able to give a conversion of 94.5% methyl ester and formed esteramine at 170 °C for 2 h. Therefore, the production of esterquats from esteramine may become more economically feasible through the methyl ester route by using the CaO catalyst, which can be recycled three times.     

Destructive and non-destructive evaluation of concrete for optimum sand to aggregate volume ratio

Aggregates are the biggest contributor to concrete volume and are a crucial parameter in dictating its mechanical properties. As such, a detailed experimental investigation was carried out to evaluate the effect of sand-to-aggregate volume ratio (s/a) on the mechanical properties of concrete utilizing both destructive and non-destructive testing (employing UPV (ultrasonic pulse velocity) measurements). For investigation, standard cylindrical concrete samples were made with different s/a (0.36, 0.40, 0.44, 0.48, 0.52, and 0.56), cement content (340 and 450 kg/m³), water-to-cement ratio (0.45 and 0.50), and maximum aggregate size (12 and 19 mm). The effect of these design parameters on the 7, 14, and 28 d compressive strength, tensile strength, elastic modulus, and UPV of concrete were assessed. The careful analysis demonstrates that aggregate proportions and size need to be optimized for formulating mix designs; optimum ratios of s/a were found to be 0.40 and 0.44 for the maximum aggregate size of 12 and 19 mm, respectively, irrespective of the W/C (water-to-cement) and cement content.     

Management of excess energy in a photovoltaic/grid system by production of clean hydrogen

In this article, the authors design a new clean storage device for a photovoltaic system (PV) reinforced by the electrical grid. The photovoltaic system supplies power to a DC load. When the power of the photovoltaic source is insufficient, the electrical grid compensates the energy deficit. On the other hand, if the load is satisfied and the PV source is still able of supplying energy, the energy excess is diverted to an own storage unit materialized by an electrolysis which produces gaseous hydrogen by the process of electrolysis of water. The authors show that the quantity of hydrogen produced is proportional to the photovoltaic energy excess and also to the flow of water injected into the electrolysis. In this case, it is a question of designing an electrolysis with specific characteristics, which takes into account the quantity of energy excess and the flow of water injected into it. The authors abandon the idea of controlling the water flow by means of a pumping-electrovalve system, and initiate the idea of replacing the function of the pump by the action of gravity. The work focuses on the development of an electrolysis optimization approach using the water flow control in its alliance with the PV power excess which is also maximized. For an optimized use of the global system (load and electrolysis), the authors present an architecture based on energy-converting structures (DC/DC and AC/DC). In addition, to increase the reliability and safety of the system, the authors finish by developing a power management strategy (PMS) in the designed system. This power management strategy organizes the energy flow and selects the appropriate path of this flow between the two energy sources (PV and electrical grid) and the two possible energy receivers (load and electrolysis). A complete modeling of the system is developed in the Matlab/Simulink environment. The simulation results show that the hybrid system (PV and electrical grid) is able to permanently supplying the load and potentially storing the excess of the PV energy in the form of hydrogen gas.     

Enhanced Hydrogen Generation from Empty Fruit Bunches by Charcoal Addition into a Downdraft Gasifier

Hydrogen production by co-gasification of empty fruit bunches of palm oil could be enhanced by adding charcoal. Physiochemical characterization of raw feedstocks was performed to determine their exergy potentiality. The raw feedstocks, gasified charcoal, and the end product of produced gas were analyzed by different techniques. Gasification experiments were performed using a pilot-scale downdraft gasifier. The heating value, composition of product gas, yield of hydrogen, and exergy efficiency were used to verify the improvement of hydrogen production during the co-gasification process. Charcoal with empty fruit bunches of palm oil leads to a much higher yield of hydrogen than lower charcoal ratios or solely empty fruit bunches. This enhanced hydrogen fuel can contribute to future energy demand.     

Influence of branching regularity on the behavior of hyperbranched polymers in solution

A carbosilane pseudo‐dendrimer with irregular structure and degree of branching DB = 1 was synthesized and fractionated. The molar masses of the obtained fractions ranged from 5000 to 490 000 g mol^?1. The hydrodynamic and conformational properties were studied by the methods of light scattering, sedimentation‐diffusion analysis and viscometry in dilute hexane and toluene solutions. The Mark ? Kuhn ? Houwink dependences were obtained. The results for the pseudo‐dendrimer are compared with the data for the initial hyperbranched poly(diallylcarbosilane) with DB = 0.5 and carbosilane dendrimer. It is shown that the solution properties of the pseudo‐dendrimer are close to those for the irregular hyperbranched polymer and differ significantly from the dendrimer behavior. Hence, it is branching regularity rather than the degree of branching that determines the conformational and hydrodynamic properties of hyperbranched polymers with a high degree of branching DB ≥ 0.5. © 2014 Society of Chemical Industry