Green Measurements for Software Product Based on Sustainability Dimensions

Software is a central component in the modern world and vastly affects the environment’s sustainability. The demand for energy and resource requirements is rising when producing hardware and software units. Literature study reveals that many studies focused on green hardware; however, limited efforts were made in the greenness of software products. Green software products are necessary to solve the issues and problems related to the long-term use of software, especially from a sustainability perspective. Without a proper mechanism for measuring the greenness of a particular software product executed in a specific environment, the mentioned benefits will not be attained. Currently, there are not enough works to address this problem, and the green status of software products is uncertain and unsure. This paper aims to identify the green measurements based on sustainable dimensions in a software product. The second objective is to reveal the relationships between the elements and measurements through empirical study. The study is conducted in two phases. The first phase is the theoretical phase, where the main components, measurements and practices that influence the sustainability of a software product are identified. The second phase is the empirical study that involved 103 respondents in Malaysia investigating current practices of green software in the industrial environment and further identifying the main sustainability dimensions and measurements and their impact on achieving green software products. This study has revealed seven green measurements of software product: Productivity, Usability, Cost Reduction, Employee Support, Energy Efficiency, Resource Efficiency and Tool Support. The relationships are statistically significant, with a significance level of less than 0.01 (p = 0.000). Thus, the hypothesised relationships were all accepted. The contributions of this study revolve around the research perspectives of the measurements to attain a green software product.     

Risks of modular integrated construction: A review and future research directions

Stakeholders remain skeptical in adopting modular integrated construction (MiC) because of the associated risks and uncertainties, although its benefits have been extensively documented. The unique business model of MiC nurtures several risks and uncertainties different from those of the conventional construction approach. Despite the growing attention on MiC with its market expansion, no systematic evaluation is in place to monitor its risks research progress. Accordingly, this research reviewed published literature addressing the risks associated with MiC from 1992 to 2019. Analysis reveals that the research publications on risks of MiC witnessed a steady growth, with considerable progress occurring in the last decade. Result implies that the risk of MiC has gained extra attention in the construction engineering and management domain in recent times. Existing empirical studies have focused heavily on perceived implementation risks, supply chain risks, schedule risks, investment risks, structural risks, ergonomic risks, and MiC risk management strategies, which indicate that MiC is associated with a host of risk events. The research further identified the critical risk events (CREs) in the application of MiC based on frequency of occurrence. The identified CREs contributes to the checklists of risk events in the implementation of offsite construction (OSC). The latter may be useful in risk planning, especially where the MiC is less developed, and fewer or no bespoke risk assessment exists. Research gaps in existing studies are highlighted in this research, and areas for further studies are then proposed. Thus, it makes a useful contribution to the scholarly literature on the risk of OSC and may prove useful to offsite construction researchers, industry practitioners, and project managers.     

Preparation of presintered zirconia blocks for dental restorations through colloidal dispersion and cold isostatic pressing

This work proposes an effective method for dispersion of zirconia suspension for dental block preparation and optimizes the cold isostatic pressing (CIP) pressure to improve the densification of slip-casted zirconia blocks. Two batches of 44 wt% zirconia suspension were prepared using distilled water in a pH 2 medium containing 0.5 wt% polyethyleneimine as dispersant. The first batch was sonicated for different durations (from 5 min to 30 min), and the second batch was dispersed through ball milling at rotational speeds of 200, 300, and 400 rpm for 60, 90, and 120 min. All suspensions were subjected to sedimentation test and particle size measurement. Results revealed that the optimum ultrasonication duration was 10 min, which yielded the smallest particle size of 133 nm. Ball milling at 300 rpm for 120 min achieved the maximum dispersion of particles, with an average size of 75 nm. Under the optimum conditions of ultrasonication duration, ball milling duration, and ball milling speed, the particle size decreased to 48 nm, which is close to the primary particle size. These dispersion techniques and parameters were selected for preparing a suspension to be consolidated into blocks through slip casting and were enhanced through CIP at pressure ranging from 100 MPa to 300 MPa. CIP compaction at 250 MPa significantly increased the shrinkage percentage of green zirconia blocks, with pore radius decreased to 18 nm. The density of zirconia pressed at 250 MPa and presintered at a low temperature of 950 °C was 59% of the theoretical density and was higher than that of commercial presintered blocks. Thus, CIP should be conducted under a compaction pressure of 250 MPa to produce dense and homogeneous zirconia blocks.     

Suspension stability and sintering influence on yttria-stabilized zirconia fabricated by colloidal processing

The stability of nano-zirconia 3YSZ powder in suspension was extensively studied by the colloidal method, and the optimum sintering temperature of the green sample fabricated through slip casting was determined. Zirconia suspensions with 10 vol% powder loading were prepared with distilled water, and HNO₃ was used to adjust the pH of the suspension to pH 1–6. All of the suspensions were subjected to sedimentation test, and the results showed that the suspensions adjusted to pH 2 had the lowest sediment volume. This finding indicates that a suspension with pH 2 produces higher packing density. Viscosity test was carried out for the suspensions added with dispersant ranging from 0.3 wt% to 0.7 wt% polyethyleneimine (PEI) with and without pH adjustment. The suspension containing 0.5 wt% PEI with pH 2 adjustment produced the lowest viscosity because of interparticle bond breakage in the aggregates, thus forming colloidally stable suspensions. The zirconia suspension containing 0.5 wt% PEI and whose pH was adjusted to pH 2 was chosen to be slip casted into cylindrical shape. Green samples were sintered at various sintering temperatures that ranged from 1100 °C to 1500 °C through a two-step sintering method. The sample sintered at 1500 °C was found to be porosite-free, and its highest relative density was 99.6% of the theoretical density. Morphological studies detected pores in the microstructure of the samples sintered at low sintering temperatures (1100 and 1200 °C). By contrast, the samples sintered at 1400 and 1500 °C were fully densified. However, the grain size of the sample sintered at 1500 °C was 230 nm, which indicated excessive grain growth. The Vickers hardness of the sample sintered at 1400 °C was found to be highest (12.9 GPa) and comparable to results found in the literature.     

Alternative Hotelling's T2 Charts using Winsorized Modified One‐Step M‐estimator

Hotelling's T² chart is a popular tool for monitoring statistical process control. However, this chart is sensitive in the presence of outliers. To alleviate the problem, this paper proposed alternative Hotelling's T² charts for individual observations using robust location and scale matrix instead of the usual mean vector and the covariance matrix, respectively. The usual mean vector in the Hotelling T² chart is replaced by the winsorized modified one‐step M‐estimator (MOM) whereas the usual covariance matrix is replaced by the winsorized covariance matrix. MOM empirically trims the data based on the shape of the data distribution. This study also investigated on the different trimming criteria used in MOM. Two robust scale estimators with highest breakdown point, namely S_n and T_n were selected to suit the criteria. The upper control limits for the proposed robust charts were calculated based on simulated data. The performance of each control chart is based on the false alarm and the probability of outlier's detection. In general, the performance of an alternative robust Hotelling's T² charts is better than the performance of the traditional Hotelling's T² chart. Copyright © 2012 John Wiley & Sons, Ltd.     

A review of routing strategies for optical burst switched networks

The exact contribution of this paper is a review of existing state‐of‐the‐art routing strategies for optical burst switched networks developed by researchers to deal with burst contention before it happens. Routing schemes are implemented in space domain, which make them simple and cost effective. Additionally, the paper points out the importance of routing as an effective way to deal with burst contention compared to other solutions. It also underlines the main differences between contention avoidance schemes and contention resolution techniques for optical burst switched networks. We believe that this review will help different optical burst switched researchers involved in the development of route optimization algorithms to control burst contention. Copyright © 2011 John Wiley & Sons, Ltd.     

Molecular Characterization of α- and β-Thalassaemia among Malay Patients

Both α- and β-thalassaemia syndromes are public health problems in the multi-ethnic population of Malaysia. To molecularly characterise the α- and β-thalassaemia deletions and mutations among Malays from Penang, Gap-PCR and multiplexed amplification refractory mutation systems were used to study 13 α-thalassaemia determinants and 20 β-thalassaemia mutations in 28 and 40 unrelated Malays, respectively. Four α-thalassaemia deletions and mutations were demonstrated. −−^SEA deletion and α^CSα accounted for more than 70% of the α-thalassaemia alleles. Out of the 20 β-thalassaemia alleles studied, nine different β-thalassaemia mutations were identified of which β^E accounted for more than 40%. We concluded that the highest prevalence of (α- and β-thalassaemia alleles in the Malays from Penang are −−^SEA deletion and β^E mutation, respectively.     

Effect of organic salt doping on the performance of single layer bulk heterojunction organic solar cell

The effect of organic salt, tetrabutylammonium hexafluorophosphate (TBAPF₆) doping on the performance of single layer bulk heterojunction organic solar cell with ITO/MEHPPV:PCBM/Al structure was investigated where indium tin oxide (ITO) was used as anode, poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEHPPV) as donor, (6,6)-phenyl-C61 butyric acid methyl ester (PCBM) as acceptor and aluminium (Al) as cathode. In contrast to the undoped device, the electric field-treated device doped with TBAPF₆ exhibited better solar cell performance under illumination with a halogen projector lamp at 100 mW/cm². The short circuit current density and the open circuit voltage of the doped device increased from 0.54 μA/cm² to 6.41 μA/cm² and from 0.24 V to 0.50 V, respectively as compared to those of the undoped device. The significant improvement was attributed to the increase of built-in electric field caused by accumulation of ionic species at the active layer/electrode interfaces.