超临界机组发生FAC的因素及相互关系分析

为了减轻因流动加速腐蚀(FAC)引起的锅炉结垢加速、汽水系统管道厚度减小甚至爆裂现象，对超临界机组发生流动加速腐蚀的机理及其主要影响因素进行了研究，并讨论了管壁内表面粗糙度、蒸汽含汽率、pH值、溶氧量对FAC的影响，以及温度与pH值、温度与流速、pH值与溶解氧量、溶解氧量与氢电导率等影响因素之间的相互作用关系，最后结合实际电厂的运行数据验证了分析结果。研究表明：减小工质流速、管壁粗糙度和氢电导率，增大给水的pH值和溶解氧含量可以使FAC的腐蚀速率减小，超临界加氧处理时pH值应在8.9～9.2之间，溶解氧量范围为45～100μg/L,氢电导率的期望值在0.1μS/cm以下。由于各影响因素之间的作用十分复杂，本文只给出了大致范围和趋势，并未给出准确数据。     

Rational Designs for Lithium-Sulfur Batteries with Low Electrolyte/Sulfur Ratio

Lithium-sulfur batteries (LSBs) are considered a promising next-generation energy storage device owing to their high theoretical energy density. However, their overall performance is limited by several critical issues such as lithium polysulfide (PS) shuttles, low sulfur utilization, and unstable Li metal anodes. Despite recent huge progress, the electrolyte/sulfur ratio (E/S) used is usually very high (≥20 µL mg⁻¹), which greatly reduces the practical energy density of devices. To push forward LSBs from the lab to the industry, considerable attention is devoted to reducing E/S while ensuring the electrochemical performance. To date, however, few reviews have comprehensively elucidated the possible strategies to achieve that purpose. In this review, recent advances in low E/S cathodes and anodes based on the issues resulting from low E/S and the corresponding solutions are summarized. These will be beneficial for a systematic understanding of the rational design ideas and research trends of low E/S LSBs. In particular, three strategies are proposed for cathodes: preventing PS formation/aggregation to avoid inadequate dissolution, designing multifunctional macroporous networks to address incomplete infiltration, and utilizing an imprison strategy to relieve the adsorption dependence on specific surface area. Finally, the challenges and future prospects for low E/S LSBs are discussed.     

Recent advancement and prospective of waste plastics as biodiesel additives: A review

Recently, commodity plastics have been shown to be a promising additive to improve the fuel properties of biodiesel, which offers a promising solution to the plastic pandemic. As many environmental and societal issues arise from plastic pollution, repurposing technologies are paramount in order to meet Sustainable Development Goals (SDG). A potentially cost-effective approach can be achieved by using waste plastics as biodiesel additives – resonating to the expression ‘to kill two birds with one stone’. However, given the novelty of such investigation, current optimization studies show varying results on the ideal plastic-to-biodiesel ratio as well as the reaction parameters. The difficulty in determining the exact optimum values is due to the many variations of biodiesel properties and the complex behaviour of plastic polymers, which are seldom discussed in review papers. Hence, to address the literature gap, this paper offers the necessary fundamentals of biodiesel and plastic dissolution; facilitating future researches to advance the application of plastics as viable biodiesel additives. Accordingly, the topics covered include the fuel and solvent properties of biodiesel related to its' composition, as well as the polymer dissolution phenomena. Finally, as the focal aim of the paper, a synopsis on the recent advancement of plastic-added biodiesel is presented; in particular, those that are related to the blend characteristics, fuel properties, combustion quality, and environmental impact.     

基于萤石溶解/表面转化的含钙矿物表面定向调控浮选技术及机理研究

研究了萤石在白钨矿和方解石表面溶解和转化的可能性, 发现萤石可以在特定的捕收剂体系下作为抑制剂实现含钙矿物的浮选分离。浮选实验结果表明, 萤石作为抑制剂, 在白钨矿和方解石的浮选中, 用量小、作用效果明显; 动电位检测结果证实了萤石能明显降低方解石的动电位, 但对白钨矿基本没有影响; XPS检测结果证明了萤石对方解石的作用主要在于对Ca-O键能的减弱和Ca-F基团的生成, 即在方解石表面生成CaF2膜; AFM检测则可直观观察到方解石表面经过萤石处理之后出现明显的起伏, 印证了离子的侵蚀与CaF₂膜的生成。     

P2O5对炼钢炉渣中石灰溶解过程的影响

在1400℃下，将平均尺寸φ15 mm?10 mm的石灰块投入CaO?SiO2?FeO及CaO?SiO2?FeO?P2O5两组渣系中，研究了静态条件下石灰在两组渣系中的溶解行为。结果表明，两组渣系在反应界面周围形成四个区域，即基体渣层、C2S渗透层、铁酸钙渗透层和石灰层。渗透层为石灰中的Ca2+与液渣中的Fe2+相互渗透所形成的一个多相共存区域，存在致密固相层影响石灰的溶解。渗透层中的铁酸钙层逐渐被C2S层取代，C2S层厚度不断增加最终溶解于液相渣中。5~60 s两组渣系石灰溶解速度相近，60~80 s含磷渣系石灰溶解速度显著加快。当渣中加入P2O5时，磷会固溶于C2S中形成C2S?C3P固溶体层，该层的形成会排挤FeO进入渣中，提高渣的渗透能力，加速石灰溶解。     

汽爆秸秆对磷矿粉溶解作用及其溶解残渣对小麦生长的影响

为探究生物质对磷矿粉的溶解作用，以玉米秸秆为原料，利用蒸汽爆破（汽爆）技术释放有机酸，在高温水热条件下溶解磷矿粉并制备含磷腐殖酸。通过实验对汽爆秸秆溶解磷矿粉工艺进行了探究及优化，并利用傅里叶红外光谱（FT-IR）、扫描电子显微镜（SEM）和X射线荧光光谱（XRF）进行分析和表征。研究结果表明：15 g汽爆秸秆与1 g磷矿粉以及75 mL水在170℃、加入10% CaCl₂的条件下，反应3 h的溶磷量为1.46 mg/g（以秸秆质量计，下同）。加入与磷矿粉相同质量的NaHSO₄后可使体系pH值降低至2，pH值的降低是磷溶出的关键因素，溶磷量提高为13.10 mg/g。溶磷后的秸秆制备腐殖酸作为小麦盆栽肥料，用量0.2%时，小麦株高、根长、叶绿素含量和相对电导率均显著高于空白组。     

选择相溶解技术制备微/纳结构的研究进展

选择相溶解技术是一种简单、经济、有效的微/纳结构制备方法,尤其是在超长径比、超深宽比和单晶微/纳结构制备方面具有独特的优势。其原理是提取两相或多相合金中的微/纳结构,尺寸调控主要在预制合金形成的过程中进行。本文在明确区分选择相溶解技术和去合金化的基础上,首次详细综述了选择相溶解技术在纳米颗粒、微/纳丝、微/纳米孔和微/纳通道制备方面的研究进展,并结合本课题组研究工作完善了其工艺流程,拓宽了其应用范围,丰富了微/纳结构种类,为该技术在微/纳结构制备领域的广泛应用奠定了基础。     

一种镍基单晶高温合金高周疲劳引起的g′溶解行为研究

研究了一种镍基单晶高温合金SRR99在不同温度下的高周疲劳行为,试样采用[001]取向的单晶试棒。结果表明条件疲劳强度随着试验温度的升高先上升后降低,具有与高温拉伸强度表现出相同的变化规律。通过扫描电子显微镜和透射电子显微镜的观察发现g′相的形貌发生了显著变化,经过高温循环变形后g′析出相发生了溶解。在交变应力的作用下,g′与基体界面产生大量的位错,而位错的往复运动引起了g′相的溶解。因此循环加载过程中伴随着g′的不断溶解,共格界面的强化作用不断减弱。 除此之外,通过裂纹扩展方向与试样轴向的夹角可以判断出疲劳裂纹的扩展主要沿着(111)晶面进行,根据扫描电镜和透射电镜的观察结果对于循环加载的微观组织演化机理进行了讨论。     

Inferring kinetic dissolution of NaCl in aqueous glycol solution using a low-cost apparatus and population balance model

An experimental methodology for inferring brine dissolution rate in monoethylene glycol (MEG) solutions at different temperatures using a webcam combined with a mathematical model is presented. The measurement system is designed to track the RGB (red, green, and blue) colour variations during the dissolution process. A dynamic model augmented with the population balance equation is applied to describe the dissolution process. Moreover, the dissolution rate is consistently related to the temperature and MEG concentration through the driving force based on the Gibbs energy and chemical affinity. The applied low-cost measurement apparatus proved to be a useful resource for tracking the dissolution dynamics in a wide range of undersaturation.     

Ionic liquids for coal dissolution,extraction and liquefaction

Coal is the most abundant fossil fuel. Direct combustion of low- and medium-rank coals causes alarming environmental impacts. Therefore, it is crucial for coal to undergo pretreatments before its efficient utilization [such as coal to liquid (CTL) processes]. Conventional pretreatment methods suffer from several limitations including the use of volatile organic solvents, environmental hazards, strong reaction conditions (e.g. high temperature and pressure), consumption of large quantities of nonrecoverable chemicals (e.g. bases used in aqueous alkaline digestion), or being only effective for specific coals. On the other hand, coal pretreatment by nonvolatile ionic liquids (ILs) could lead to partial coal dissolution/swelling and structure disruption, which is a critical step before coal liquefaction, hydrogenation, pyrolysis or the inhibition of oxidation/combustion. In addition, ILs are suitable solvents for extracting sulfur compounds from coal, asphaltenes from Direct Coal Liquefaction Residues (DCLR) and phenolic compounds from coal tar. This review will discuss these aspects of coal pretreatments by ILs, and identify how ILs could lead to a cleaner and more efficient utilization of coal resources. © 2020 Society of Chemical Industry