Reduction of sidelobe levels in multicarrier radar signals via the fusion of hill patterns and geometric progression

Multi-carrier waveforms have several advantages over single-carrier waveforms for radar communication. Employing multi-carrier complementary phase-coded (MCPC) waveforms in radar applications has recently attracted significant attention. MCPC radar signals take advantage of orthogonal frequency division multiplexing properties, and several authors have explored the use of MCPC signals and the difficulties associated with their implementation. The sidelobe level and peak-to-mean-envelope-power ratio (PMEPR) are the key issues that must be addressed to improve the performance of radar signals. We propose a scheme that applies pattern-based scaling and geometric progression methods to enhance sidelobe and PMEPR levels in MCPC radar signals. Numerical results demonstrate the improvement of sidelobe and PMEPR levels in the proposed scheme. Additionally, autocorrelations are obtained and analyzed by applying the proposed scheme in extensive simulation experiments.     

Subdivision based isogeometric analysis for geometric flows

We present a new isogeometric analysis (IGA) approach based on extended Loop subdivision scheme for solving various geometric flows defined on subdivision surfaces. The studied flows include the second-order, fourth-order, and sixth-order geometric flows, such as averaged mean curvature flow, constant mean curvature flow, and minimal mean-curvature-variation flow, which are generally derived by minimizing the associate energy functionals with $L^2$-gradient flow respectively. The geometric flows are discretized by means of subdivision based IGA, where the finite element space is formulated by the limit form of the extended Loop subdivision for different initial control meshes. The basis functions, consisting of quartic box-splines corresponding to each subdivided control mesh, are utilized to represent the geometry exactly. For the cases of the evolution of open surfaces with any shape boundary, high-order continuous boundary conditions derived from the mixed variational forms of the geometric flows should be implemented to be consistent with the isogeometric concept. For time discretization, we adopt an adaptive semi-implicit Euler scheme. By several numerical experiments, we study the convergence behaviors of the proposed approach for solving the geometric flows with high-order boundary conditions. Moreover, the numerical results also show the accuracy and efficiency of the proposed method.     

磨料有序排布电镀砂轮的制备及其把持力研究

为解决电镀砂轮磨削加工中容屑空间不足的问题，采用点胶微粘接的方法制备了磨料有序排布的电镀砂轮，分析了磨料粘接效果和镀层力学性能。通过SEM分析了磨料/镀层/导电胶的结合界面，并进行了干磨削试验。研究结果表明，直径约为磨料粒径40%的胶点可粘接住磨料，单个胶点上粘接多颗磨料的占比小于6%；双脉冲电镀工艺制备的镀层显微硬度大于500HV，表层残余应力小于100MPa，磨料/镀层/导电胶之间的界面贴合紧密，无明显缺陷；砂轮在磨削时没有出现磨料脱落现象。     

Multicriteria decision-making using Archimedean aggregation operators in Pythagorean hesitant fuzzy environment

In multicriteria decision-making (MCDM), the existing aggregation operators are mostly based on algebraic t-conorm and t-norm. But, Archimedean t-conorms and t-norms are the generalized forms of t-conorms and t-norms which include algebraic, Einstein, Hamacher, Frank, and other types of t-conorms and t-norms. From that view point, in this paper the concepts of Archimedean t-conorm and t-norm are introduced to aggregate Pythagorean hesitant fuzzy information. Some new operational laws for Pythagorean hesitant fuzzy numbers based on Archimedean t-conorm and t-norm have been proposed. Using those operational laws, Archimedean t-conorm and t-norm-based Pythagorean hesitant fuzzy weighted averaging operator and weighted geometric operator are developed. Some of their desirable properties have also been investigated. Afterwards, these operators are applied to solve MCDM problems in Pythagorean hesitant fuzzy environment. The developed Archimedean aggregation operators are also applicable in Pythagorean fuzzy contexts also. To demonstrate the validity, practicality, and effectiveness of the proposed method, a practical problem is considered, solved, and compared with other existing method.     

负径向电场对带电粒子俘获率影响的数值模拟

本文采用数值方法求解Grad-Shafranov方程反演EAST典型长脉冲放电实验(炮号33068)的平衡位形和磁场分布，进而结合粒子在托卡马克电磁场中的运动方程，模拟氘离子在负径向电场存在时的运动轨迹，并统计不同负径向电场下的氘离子俘获率。结果表明：随负径向电场的增大，氘离子轨迹由扩张通行轨迹向外翻香蕉轨迹再向内翻香蕉轨迹，最后向压缩通行轨迹演变；氘离子俘获率随负径向电场的增大而减小，氘离子初始速度越小，其变化越大。     

单自由度八杆仿生机构构型与尺度同步设计方法

单自由度八杆仿生机构杆长参数较多，是仿生机器人领域研究的难点之一。为提高设计效率，提出一种构型与尺度同步设计方法。在选定的运动链和机架的基础上，以不等式形式分步给出运动可行性及外形约束条件，使得上一步的杆长可作为下一步求解的已知值。通过该过程，在得到八杆仿生机构构型的同时，快速得到所有杆长的初步可行域。循环上述过程，逐步缩小约束条件的范围，可使得八杆机构的杆长快速接近目标值。在此基础上，分类讨论了连杆搭接顺序、约束条件及基本运动链的差异对求解难度及构型结果的影响。利用所提出的单自由度八杆仿生机构的设计方法，在对初始条件进行合理选取的前提下，可在初步得到构型的同时将杆长限定在较小范围内，实现了构型与尺度的同步设计。该方法还可应用于其他单自由度机构的设计当中，具有较好的借鉴意义。     

Reducing idle time in event-triggered software execution via runnable migration and DPM-Aware scheduling

Being the main driver of innovation in the automotive industry, vehicle software calls for more efficient tools for its development. Safety-critical applications are predominantly written respecting the AUTOSAR standard, where tasks comprise code-fragments called runnables, and deployed on multi-core architectures. However, task parallelization introduces a substantial number of idle intervals, as runnables have to be mapped and scheduled at design-time without violating data dependencies. In parallelized event-triggered tasks, these intervals are utilized by migrating runnables from the interrupted time-triggered tasks. We propose to also migrate runnables from consecutively scheduled tasks and additionally, to maximize their number using DPM-aware application scheduling.     

机床结构轻量化设计研究进展

对机床进行优化的结构构型设计,使得材料在机床结构空间内更加合理地分布和有效地利用,一直都是机床设计工作者追求探索的目标。论述机床构型和结构件轻量化设计的研究历程和技术发展,对机床结构轻量化设计中常用的现代设计方法:参数优化、结构拓扑优化、多方法综合结构设计、仿生优化设计方法进行具体技术介绍和综合评述,并对近年兴起的仿生优化设计方法进行从方法、实现手段和轻量化效果等方面重点分析和评述,对机床构型和结构件轻量化设计研究的未来发展提出展望。     

基于Fluent的高压水射流喷嘴优化模拟研究

为了提高高压水射流技术的破煤效率,采用Fluent软件对高压水射流的喷嘴结构和几何参数进行了优化模拟。通过分析水射流的轴向速度和壁面静压分布,选择了最佳的喷嘴结构和几何参数。结果表明:圆柱形喷嘴的最大射流速度发生在喷嘴内部,而锥形和锥直形喷嘴的最大射流速度发生在喷嘴外部,且锥形和锥直形喷嘴的最大射流速度和最大压力均明显大于圆柱形喷嘴,考虑到水射流的附壁效应,锥形喷嘴为最佳选择。锥形喷嘴的最优几何参数为:喷嘴出口直径3 mm,喷嘴锥角7°,喷嘴长度9 mm。高压水射流喷嘴的优化对提高煤层瓦斯抽采效率具有重要意义。