基于音频特征的工程车辆工况识别研究

高效率地使用工程车辆是工程项目管理中节约成本的有效方法，无人监管环境下工程车辆的工况识别，是实现工程车辆高效率使用的有效手段。目前以GPS等技术为核心的车辆智能管理系统未对工程车辆进行工况识别，提出一种基于GRU循环神经网络的工程车辆工况识别方法，通过对工程车辆在不同工况下产生的音频信号进行分析，从中提取Mel倒谱系数作为主要特征，构建GRU循环神经网络模型进行训练和识别。实验结果表明，该方法可以实现对工程车辆工况的有效识别。     

基于词性特征的明喻识别及要素抽取方法

比喻是一种利用事物之间的相似点建立关系的修辞方式。明喻是比喻中最常见的形式,具有明显的喻词,例如"像",用于关联本体和喻体。近年来高考语文散文类鉴赏题中多有考查明喻句的试题,为了解答此类鉴赏题,需要识别比喻句中的本体和喻体要素。该文提出了基于词性特征的明喻识别及要素抽取方法。首先将句子中词向量化表示与词性特征向量化表示进行融合,将融合后的向量输入到BiLSTM中进行训练,然后利用CRF解码出全局最优标注序列;最后得到明喻识别和要素抽取的结果。公开数据集上的实验结果表明,该方法优于已有的单任务方法;同时也将该文方法应用于北京高考语文鉴赏题中比喻句的识别与要素抽取,验证了方法的可行性。     

直流配网型混合动力系统在车客渡船上的应用

针对车客渡船动力负荷切换频繁,传统柴油机推进油耗高、排放和噪声大的问题,提出一种基于变速发电机组和超级电容储能装置的直流配网型混合动力系统。目前系统已成功应用于“江苏路渡3011”轮,实船运行数据显示:该混合动力系统不仅能达到较好的节油效果、降低排放,更在操控性、舒适性上优于传统的柴油机推进模式。     

基于混合蚁群算法的异质车队低碳VRP研究

针对货运车辆在配送调度过程中产生大量碳排放的问题，建立模型将多种影响碳排放量的因素协同优化。模型中考虑了不同载重量的异质车队，两个节点之间有多条道路的柔性路径，以及车辆重量随卸货而减少的动态负载等因素，以碳排放量、行驶时间和行驶路程为优化目标，并加入了节点需求时间窗、根据速度变化划分路段、交接和卸货时间的约束。提出了一种混合蚁群算法，利用蚁群算法信息素强度更新方式保持群体记忆性，利用粒子群算法的快速收敛特性增加计算效率。通过随机数值算例的仿真优化与对比分析，验证了算法和模型的有效性。     

Delay compensated control of the Stefan problem and robustness to delay mismatch

This paper presents a control design for the one‐phase Stefan problem under actuator delay via a backstepping method. The Stefan problem represents a liquid‐solid phase change phenomenon which describes the time evolution of a material's temperature profile and the interface position. The actuator delay is modeled by a first‐order hyperbolic partial differential equation (PDE), resulting in a cascaded transport‐diffusion PDE system defined on a time‐varying spatial domain described by an ordinary differential equation (ODE). Two nonlinear backstepping transformations are utilized for the control design. The setpoint restriction is given to guarantee a physical constraint on the proposed controller for the melting process. This constraint ensures the exponential convergence of the moving interface to a setpoint and the exponential stability of the temperature equilibrium profile and the delayed controller in the norm. Furthermore, robustness analysis with respect to the delay mismatch between the plant and the controller is studied, which provides analogous results to the exact compensation by restricting the control gain.     

Mathematical formulation and heuristic algorithms for optimisation of auto-part milk-run logistics network considering forward and reverse flow of pallets

The operational planning of distribution network for automotive industry is complex with many conditions to consider, including heterogeneous fleet, enforcing the feasibility of 3D-packing of pallets into vehicles to address the vehicle's capacity in terms of weight and volume, compatibility of orders in a vehicle, returning empty pallets from assembly-plants backwards to suppliers, and delivery time windows. A mathematical model (MILP) is proposed that takes account of these conditions to minimise total transportation costs. The network structure can be a combination of direct shipment and milk-run for both forward and reverse flow of pallets. The model is solved optimally for small-size problems. For solving larger problems, a heuristic algorithm (in two versions) is proposed that uses a similarity measure to generate a reasonable list of orders. Best/first-fit strategies are employed to generate a feasible solution with the aid of a relaxed version of the proposed MILP. Improvement heuristics are also designed. Unlike most of existing constructive heuristics, our aim for developing the heuristic approach is to force routing decision, with all of its considerations, being made optimal. We also use the proposed best-fit strategy in the body of grouping evolution strategy (GES) algorithm to attain an effective meta-heuristic approach. The effectiveness of heuristics is tested on generated instances which demonstrates they are optimal for small-size problems. They are also tested on the data of daily auto-parts shipments gathered from the largest Iranian automobile company. Results demonstrate there exists a significant potential for cost saving through milk-run strategy compared with the direct shipping strategy.     

Airline planning and scheduling: Models and solution methodologies

The airline industry is a representative industry with high cost and low profitability. Therefore, airlines should carefully plan their schedules to ensure that overall profit is maximized. We review the literature on airline planning and scheduling and focus on mathematical formulations and solution methodologies. Our research framework is anchored on three major problems in the airline scheduling, namely, fleet assignment, aircraft routing, and crew scheduling. General formulation, widely used solution approaches, and important extensions are presented for each problem and integrated problems. We conclude the review by identifying promising areas for further research.     

基于英飞凌TC275的整车控制器CCP协议底层驱动开发

针对以英飞凌TC275单片机为平台的整车控制器,进行控制器局域网络标定协议(controller area network calibration protocol,CCP)底层驱动程序的开发。依据CCP的需求开发了英飞凌TC275的控制器局域网络(controller area network,CAN)模块、系统定时器(system timer,STM)模块和FLASH模块的底层驱动程序,实现CCP标定系统的通信连接、数据上传、数据下载、数据存储等功能。为验证系统的性能,进行整车控制器的实际测试,测试结果表明:所开发的基于TC275单片机的CCP底层驱动程序能够实现CCP的功能要求。     

Stochastic geometry of network of randomly distributed moving vehicles on a highway

Vehicular ad hoc networks (VANETs) have become an extensively studied topic in contemporary research. One of the fundamental problems that has arisen in such research is understanding the network statistical properties, such as the cluster number distribution and the cluster size distribution. In this paper, we analyze these characteristics in the case in which vehicles are located on a straight road. Assuming the Rayleigh fading model and a probabilistic model of intervehicle distance, we derive probabilistic distributions of the aforementioned connectivity characteristics, as well as distributions of the biggest cluster and the number of disconnected vehicles. All of the results are confirmed by simulations carried out for the realistic values of parameters.     

埋地管道腐蚀防护--防腐层与阴极保护存在的问题分析

在埋地管道研究工作中,关于其腐蚀的防护一直是研究的焦点问题,但现阶段常用的防护手段多为防腐层与阴极防护。为此,在文中主要对二者的保护措施展开了相应地阐述,并重点分析了2种保护手段存在的问题,旨在为后续的管道防腐研究提供相应的参考。