Static pentane extraction as a potential alternative to Soxhlet extraction for polypropylene olive oil overall migration limit measurements

Static pentane extraction of olive oil from polypropylene was evaluated as a safer, higher throughput alternative to pentane Soxhlet extraction for the recovery of olive oil from polypropylene for overall migration limit determinations. Static, ambient temperature, pentane extraction achieved quantitative recovery of olive oil from polypropylene plaques prepared by using the OM‐5 overall migration limit protocol. In addition to validation data for static extractions, a modified esterification procedure is presented as a means to accommodate the larger sample sets that are enabled with static extraction.     

基于滑模的运载器主动段俯仰通道姿控系统设计

与传统比例-积分-微分（PID）控制方法相比，滑模控制（SMC）方法可以比较容易地将不确定性纳入控制器设计中，从而增强系统的鲁棒性。探索了SMC技术在运载器主动段姿态控制中的工程应用，首先通过分析基于趋近律的SMC系统，提出了降低不连续切换项系数的需求，然后研究了基于干扰上界的SMC方法。三通道小偏差仿真结果验证了两种方法的控制效果，表明第2种控制器的鲁棒性更好，稳态误差小，同时发动机喷管摆角需求较小。     

铝合金三角形波纹夹芯板对平头弹抗冲击特性数值模拟研究

为研究铝合金三角形波纹夹芯板对平头弹体的抗冲击性能及损伤特性，利用有限元软件ABAQUS/Explicit建立弹体冲击靶板的数值模拟模型，并结合实验验证了模型及其参数的有效性。基于数值计算结果，分析了三角形波纹夹芯板几何结构对其防护性能、失效模式和能量吸收的影响规律及机理，并与等面密度单层板进行对比分析，研究结果表明，靶体几何结构对其抗冲击性能存在影响，三角形波纹夹芯板抗冲击性能低于单层板抗冲击性能。此外，增加芯体拓扑结构夹角能显著提高三角形波纹夹芯板的抗冲击性能，并且靶板几何形状会对其失效模式及耗能特性存在影响。     

A priori risk-informed approach to ensure the compliance with discharge limits for liquid radioactive effluent to be discharged from APR 1400

ABSTRACT

In order to develop a methodology to guarantee the conformance to operational discharge limits for liquid effluent from a NPP at an early stage of design, a risk-informed approach was proposed and its applicability was verified for APR 1400. Existing methodology to calculate risk-based detection limit for a single radionuclide was improved by incorporating a new model to derive more realistic pathway dose factors. A new simple expression was also proposed to adjust risk-based detection limits for multiple radionuclides mixture if necessary. In addition, a new procedure to warrant the compliance with discharge limits by controlling detection limits of only a few principal radionuclides was established in accordance with risk-informed concept. Through case studies for APR 1400 to be commissioned at a hypothetical site, it was shown that calculated pathway dose factors are more realistic for majority of radionuclides. It also turns out that neither present detection limits nor unadjusted risk-based detection limits can be justified when the radionuclide composition is unknown, however further adjustment of detection limits or increasing additional dilution factor resolves the problem. Finally, ten principal radionuclides were identified and shown to be enough for liquid effluent control at APR 1400 from a risk-informed point of view.     

Weighted preliminary-summation-based principal component analysis for non-Gaussian processes

For industrial chemical process, preliminary-summation-based principal component analysis (PS-PCA), an amended PCA method was recently provided for coping with both Gaussian and non-Gaussian characteristics. By summing the training and monitoring data respectively, PS-PCA is capable of resolving the issue of non-Gaussian processes and achieves higher fault detection rate than the traditional PCA. However, in the PS-PCA summation operation, all data samples are regarded as the same weight, which results in the fault information of newly-samples may be diluted, leading to significant detection delays. To address this challenge, in this paper, we propose a novel weighted PS-PCA (WPS-PCA) method that employs an exponential weighting scheme to put more emphasis on recent information. Subsequently, a mathematical argument demonstrates that when the number of variables is enough plentiful, the obtained summation combined with the generalized central limit theorem conforms to approximately a Gaussian distribution. The kurtosis relationships indicate this conversion will bring out well-pleasing feasibility for conventional PCA. Ultimately, the proposed technique verifies detection performance using the Tennessee Eastman process, which is compared with the existing PCA and PS-PCA schemes, in terms of the fault detection time and fault detection rate. The simulation studies reveal that the proposed method is efficient and superior.     

压水堆核电厂压力容器开盖时刻主冷却剂放射性浓度控制要求研究

压水堆核电厂停堆开盖时刻主冷却剂放射性浓度限值是核电厂的重要设计参数。本文基于停堆开盖后厂内辐射风险来源分析,建立了适用于压水堆核电厂停堆压力容器开盖时刻主冷却剂中的放射性浓度控制值评估方法,并采用欧洲第三代压水堆技术方案(EPR)堆型核电厂的设计参数对建立的方法进行了验证。验证结果表明:基于此方法得出的停堆开盖限值与EPR堆型核电厂原设计较接近。     

Visually deficient working conditions and reduced work performance in office workers: Is it mediated by visual discomfort?

IntroductionThe main purpose of this cross-sectional study was to investigate whether visual discomfort acts as a mediating factor between perceived visual ergonomic working conditions and self-rated visual performance among office workers who carry out administrative tasks and computer-based work at the Swedish Tax Agency.MethodsA questionnaire was sent to 94 office workers addressing: 1) perceived visual quality of the visual display units; 2) prevalence of eye symptoms; and 3) self-rated visual performance. Eighty-six persons (54 women (63%), 31 men (36%), and 1 of unspecified sex) answered the questionnaire. Multiple regression analysis investigated the association between visual ergonomic working conditions and visual performance, both with and without visual discomfort as a mediator.ResultsThe group mean of the Indexed survey questions indicated a reasonably good quality of visual ergonomic working conditions, a relative absence of eye symptoms, and acceptable self-rated visual performance. Results from multiple regression analysis showed a significant association between perceived visual ergonomic working conditions and self-rated visual performance (r² = 0.30, β = 0.327, p < 0.01). When visual discomfort was used as a mediator, the association between perceived visual ergonomic working conditions and self-rated visual performance remained the same (r² = 0.32, β = 0.315, p < 0.01).DiscussionIt was remarkable to discover that self-rated visual performance was independent of visual discomfort. Possible explanations include exposure factors not included in the current study, such as dry air and sensory irritation in the eyes, psychosocial stress, time spent performing near work activities, or time exposed to visually deficient working conditions.Relevance to industryThe strong connection between satisfaction with visual ergonomic working conditions and productivity in this study has implications for workplace profitability and staff satisfaction. If productivity is enhanced by better visual ergonomic working conditions, then managers of workplaces may be able to improve work outcomes by optimizing the physical work environment.     

蛋类礼盒包装结构的缓冲性能研究

目的研究蛋类礼盒包装结构的缓冲性能。方法以蛋类尺寸为基础,建立可发性聚乙烯(expandable polyethylene. EPE)缓冲单元结构和组合结构,进行静态仿真分析和实验验证,比较结构在形状、叠合层数、组合形式等参数变化时的载荷与位移。结果结构层数变化相同时,单元结构的极限载荷从143N增加到236 N,组合结构的极限载荷从224 N增加到476 N,均呈近线性增长。结论蛋类礼盒包装中,组合结构的承载能力优于单元结构,通过单元结构的组合,可满足不同蛋类的包装要求。     

高温深井通风降温技术的适用条件研究

随着矿山开采深度的不断增加，“三高一扰动”恶劣开采环境问题日益突出，给矿井通风降温工作带来极大困难。对于深井矿山，仅采用通风降温难以满足深部开采的需要，系统研究高温深井矿山通风降温技术的适用性问题，对矿山深部开采具有重要的理论意义和工程适用价值。首先从热力学角度，揭示风流在通风线路中的热交换规律；其次利用差分法原理计算深井筒风流温度，并依此推导出巷道和回采工作面风流温度变化趋势；然后结合采场安全生产允许温度进行反推，最终获取通风降温条件下的可采极限深度计算公式，并选取广西铜坑矿锌多金属矿体作为工程应用试验区进行论证分析。结果表明：基于风流的热交换模型可以推导出风流在井筒、巷道及工作面的温度计算公式，该公式与低温梯度、风流流经路径长度有关；假定工作面温度达到安全开采允许最高温度，可反推出该条件下矿山可采极限深度和巷道通风极限长度（仅采用通风降温措施时）；基于铜坑矿区锌多金属矿的实际条件，代入相关数据，验证计算所得极限开采深度符合实际，即所推导公式是可行的。