Revisiting the Parallel Strategy for DOACROSS Loops

Journal of Computer Science and Technology - DOACROSS loops are significant parts in many important scientific and engineering applications, which are generally exploited pipeline/wave-front...     

Scalable Clock Synchronization Analysis: A Symmetric Noncooperative Output Feedback Tubes-MPC Approach

In the cyber-physical environment, the clock synchronization algorithm is required to have better expansion for network scale. In this paper, a new measurement model of observability under the equivalent transformation of minimum mean square error (MMSE) is constructed based on basic measurement unit (BMU), which can realize the scaled expansion of MMSE measurement. Based on the state updating equation of absolute clock and the decoupled measurement model of MMSE-like equivalence, which is proposed to calculate the positive definite invariant set by using the theoretical-practical Luenberger observer as the synthetical observer, the local noncooperative optimal control problem is built, and the clock synchronization system driven by the ideal state of local clock can reach the exponential convergence for synchronization performance. Different from the problem of general linear system regulators, the state estimation error and state control error are analyzed in the established affine system based on the set-theory-in-control to achieve the quantification of state deviation caused by noise interference. Based on the BMU for isomorphic state map, the synchronization performance of clock states between multiple sets of representative nodes is evaluated, and the scale of evaluated system can be still expanded. After the synchronization is completed, the state of perturbation system remains in the maximum range of measurement accuracy, and the state of nominal system can be stabilized at the ideal state for local clock and realizes the exponential convergence of the clock synchronization system.      

Tuning of ferrimagnetic nature and hyperfine interaction of Ni2+ doped cobalt ferrite nanoparticles for power transformer applications

Ferrites may contain single domain particles which gets converted into super-paramagnetic state near critical size. To explore the existence of these characteristic feature of ferrites, we have performed magnetization(M-H loop) and Mössbauer spectroscopic studies of Ni²⁺ substitution effect in Co_1-xNi_xFe₂O₄ (where x?=?0, 0.25, 0.5, 0.75 and 1) nanoparticles were fabricated by solution combustion route using mixture of carbamide and glucose as fuels for the first time. As prepared samples exhibit spinel cubic structure with lattice parameters which decreases linearly with increase in Ni²⁺ concentration. The M-H loops reveals that saturation magnetization(M_s), coercive field(H_c) remanence magnetization(M_r) and magnetron number(η_B) decreases significantly with increasing Ni²⁺ substitution. The variation of saturation magnetization has been explained on the basis of Neel's molecular field theory. The coercive field(H_c) is found strongly dependent on the concentration of Ni²⁺ and decrease of coercivity suggests that the particles have single domain and exhibits superparamagnetic behavior. The Mössbauer spectroscopy shows two ferrimagnetically relaxed Zeeman sextets distribution at room temperature. The dependence of Mössbauer parameters such as isomer shift, quadru pole splitting, line width and hyperfine magnetic field on Ni²⁺ concentration have been discussed. Hence our results suggest that synthesized materials are potential candidate for power transformer application.     

Role of Nd-Ni on structural,spectral and dielectric properties of strontium-barium based nano-sized X-type ferrites

The influence of neodymium and nickel substitution on structural and dielectric parameters was investigated in strontium-barium X-type hexagonal ferrites having composition SrBaCu_2?xNi_xNd_yFe_28?yO₄₆ (x = 0, 0.2, 0.4, 0.6, 0.8, 1 and y = 0, 0.02, 0.04, 0.06, 0.08, 0.1). Sol-gel method was employed for synthesizing these hexagonal ferrites. The XRD plots of all studied materials which were annealed at 1250 °C show single phase characteristics. Lattice parameter ‘c’ increased as a consequence of larger radius of rare earth ion (Nd³⁺) as compared to (Fe³⁺), while lattice parameter ‘a’ showed very small variation. The cell volume was obtained in the range 2508.32–2523.75 (ų). The inclusion of Nd-Ni also affected X-ray density, bulk density and porosity. The FTIR spectroscopy indicated the particular absorption peaks of hexagonal ferrites and it was performed in the range of 500–700 cm^?1. On account of Nd-Ni doping, the dielectric constant, dielectric loss and AC-conductivity showed decreasing trend. The occupancy of Nd³⁺ ions at octahedral site impedes the valence alternation of Fe³⁺; therefore there was decrease in dielectric permittivity. Ac conductivity has been decreased from 9.14 to 6.49 (Ω cm)^?1 at frequency of 2.7 GHz. The Cole-Cole plots of synthesized materials noticeably revealed grain boundary contribution. The appearance of single semi-circle in impedance Cole-Cole graphs confirms the exceptional role of grain boundaries in the conduction process. The considerably lower dielectric parameters of investigated nano X-type ferrites propose their feasibility for high-frequency applications (phase shifters, dielectric resonators, stealth technology etc).     

航班恢复问题的迭代局部搜索算法

在恶劣天气和机械故障等原因造成航班不能按照原计划执行时，航空公司需要采取相应的措施对航班进行恢复。本文基于经典的资源指派模型，综合考虑了调整时间、换机、联程拉直、取消航班和调机5种恢复策略，提出一种以最小化加权成本为优化目标的航班恢复模型，并设计一种迭代局部搜索算法。首先用构造-修复启发式方法构造可行解，然后从该初始解出发，在飞机路线对的邻域中进行局部搜索。当陷入局部最优后，对解进行扰动，然后从扰动后的解重新出发进行局部搜索。为了提高搜索效率，同时降低陷入局部最优解的概率，局部搜索过程采用模拟退火算法。实例结果表明，本文提出的模型及算法能够在短时间内对受到影响的大规模航班计划进行恢复。     

基于不可靠通信链路的数据共享模块

随着企业规模的逐步扩大和计算机网络与企业信息技术的飞速发展，大中型企业陆续建立了很多业务系统，对各个系统之间数据同步的安全性提出了更高的需求。针对此需求，基于RabbitMQ消息队列中间件，本文设计并实现基于不可靠通信链路的数据共享模块，解决在企业内部两级数据中心之间的双向数据同步问题，并通过RabbitMQ的消息确认机制和持久化机制，保证数据的安全送达、无丢失。经过实践证明，该数据共享模块功能稳定，可提高两级数据中心的数据传输效率并保证其安全性。     

摇篮式五坐标加工中心C轴转台旋转故障原因分析与处理

针对HS664RT,摇篮式五坐标加工中心力矩电动机驱动的C轴转台故障,介绍了故障排查、处理方法和力矩电动机相位角同步设置步骤。     

F-OFDM仿真系统设计与时频同步算法

针对新一代5G波形的F-OFDM技术开展了研究,通过把一个宽带分为若干个子带,对每个子带进行滤波处理以实现更好的通信效能。基于Simulink平台进行了F-OFDM仿真系统的搭建,重点对F-OFDM符号同步方法和频偏估计方法进行了研究与仿真分析。实验结果表明,基于Chu序列相比采用PN序列可以获得更好的同步效果,基于导频的Classen频偏估计算法相比基于CP的CFO估计算法和基于训练序列的Moose估计方法可以获得更好的频偏估计效果。     

一种新型随钻轨迹仪的研制

针对现有随钻轨迹仪工作时间短、需人工同步、"数钻杆"记录钻孔深度不足等问题,采用深度实时测量技术、电源智能管理技术和数据自动同步与成图等关键技术,研制了新型随钻轨迹仪。该仪器由直线位移传感器、压力传感器、霍尔开关等组成,具有钻孔深度自动测量、电源智能管理、测量数据与深度自动匹配等功能。试验结果表明:新型钻孔轨迹仪工作稳定可靠、无需人工干预、工作时间长、生产效率高。     

Improved magnetic and electromagnetic absorption properties of xSrFe12O19/(1−x)NiFe2O4 composites

xSrFe₁₂O₁₉/(1−x)NiFe₂O₄ composites (0 ≤ x ≤ 1.0) were synthesized by using a conventional solid-state synthetic route. The results show that magnetic hysteresis loops of the xSrFe₁₂O₁₉/(1−x)NiFe₂O₄ composites are similar to those of individual component ferrites, except for the 0.1SrFe₁₂O₁₉/0.9NiFe₂O₄ and 0.3SrFe₁₂O₁₉/0.7NiFe₂O₄, suggesting that the hard/soft magnetic phases are well exchange-coupled. The saturation magnetization, coercivity, and remanent magnetization of the xSrFe₁₂O₁₉/(1−x)NiFe₂O₄ composites are increased with increasing content of SrFe₁₂O₁₉, with maximal values of 42.1 Am² kg⁻¹, 78.7 kA m⁻¹, 17.2 Am² kg⁻¹, respectively, as the content x is about 0.5. They are higher than those of the individual components, implying that interface coupling is present in the magnetic composites. The coercivity and remanent magnetization of the composites are increased initially with increasing sintering temperature and then show a downward tendency. For the component SrFe₁₂O₁₉ and NiFe₂O₄, the minimum reflection losses are −12.5 dB and −18.3 dB at match thicknesses of 2.5 mm and 2 mm, respectively. Compared with those of the component SrFe₁₂O₁₉ and NiFe₂O₄, the microwave absorption performances of the xSrFe₁₂O₁₉/(1−x)NiFe₂O₄ composites are improved remarkably, especially for the samples of x = 0.3 and x = 0.9. The minimum reflection losses values of the 0.3SrFe₁₂O₁₉/0.7NiFe₂O₄ composite are −31.6 dB (12.7 GHz) and −20.2 dB (13 GHz), while those of the 0.9SrFe₁₂O₁₉/0.1NiFe₂O₄ composites are −23.7 dB (16.3 GHz) and −33.5 dB (15.8 GHz), as the matching thicknesses are 2.5 mm and 2 mm, respectively. Therefore, the xSrFe₁₂O₁₉/(1−x)NiFe₂O₄ composites could be used as potential microwave absorption materials.