Dynamic model of the flip-flow screen-penetration process and influence mechanism of multiple parameters

Flip-flow screening is an important method for classifying fine particles. The traditional research of flip-flow screening focuses on the final screening results, and neglects the screen-penetration process. However, the screen-penetration process directly affects the final screening effect. In this paper, a dynamic model of the flip-flow screen-penetration process was proposed and clarified the influence mechanism of main structural parameters on the screening process. First, based on theoretical derivation and regression fitting, the mathematical model of particle screen-penetration rate and screening time was established, and the dynamic evaluation index was obtained. Then, the effect of main structural parameters, namely, the excitation frequency, displacement excitation amplitude, and stretching amount of the screen plate, on the dynamic indexes, was explored. Furthermore, a quadratic polynomial model of the main structural parameters and the two-stage dynamic evaluation index were established by using the response surface method. The explicitness and interactivity of the effects of parameters were elucidated. This work is of great significance for the accurate control of the screening process.     

南美白对虾肝胰腺蛋白提取方法优化及无水保活环境胁迫对细胞凋亡蛋白的影响

为提高Western Blotting结果的可靠性，以蛋白溶出率和凝胶电泳蛋白条带完整性为指标，比较提取液种类、研磨方式、酶抑制剂种类及其体积分数和提取时间对南美白对虾肝胰腺蛋白提取效果的影响。采用优化后的提取方法获得高质量蛋白样品，并采用Western Blotting法分析无水环境胁迫后南美白对虾肝胰腺组织中细胞凋亡信号通路相关蛋白的表达水平。结果表明：RIPA裂解液作为提取溶剂所得的蛋白溶出率高于水提和磷酸盐缓冲液，电动匀浆和液氮研磨所得蛋白条带更完整，4%蛋白酶磷酸酶混合抑制剂能有效抑制肝胰腺内源酶引起的蛋白降解；采用Western Blotting法分析无水保活期间南美白对虾肝胰腺蛋白，发现低温诱导休眠的同时会引起细胞轻微凋亡，且凋亡水平呈应激时间依赖性增加，环境胁迫解除后有所回调。     

Off-Pathway-Sensitive Protein-Splicing Screening Based on a Toxin/Antitoxin System

Protein-splicing domains are frequently used engineering tools that find application in the in vivo and in vitro ligation of protein domains. Directed evolution is among the most promising technologies used to advance this technology. However, the available screening systems for protein-splicing activity are associated with bottlenecks such as the selection of pseudo-positive clones arising from off-pathway reaction products or fragment complementation. Herein, we report a stringent screening method for protein-splicing activity in cis and trans, that exclusively selects productively splicing domains. By fusing splicing domains to an intrinsically disordered region of the antidote from the Escherichia coli CcdA/CcdB type II toxin/antitoxin system, we linked protein splicing to cell survival. The screen allows selecting novel cis- and trans-splicing inteins catalyzing productive highly efficient protein splicing, for example, from directed-evolution approaches or the natural intein sequence space.     

临涣选煤厂粗煤泥回收工艺优化的实践应用

临涣选煤厂针对洗选过程中存在的精煤泥旋流器组溢流跑粗、精煤泥弧形筛筛下水跑粗、精煤泥弧形筛脱水效果较差等问题，重点开展精煤泥分级旋流器组入料分配不均匀、筛分错配物影响、弧形筛脱水效果的现场攻关和研究。现场大量试验表明:通过停止精煤泥旋流器组，增加精煤泥弧形筛数量、减小筛缝尺寸，改变精煤泥弧形筛击打，改用高频脱水筛等方式，从源头上解决了精煤泥分级旋流器组跑粗，明显改善了精煤泥弧形筛筛下水跑粗的问题，提高了精煤泥弧形筛分选效果。在降低介泥灰分、减少浮选过程中粗颗粒的含量、缓解浮选回收压力、降低降低浮选油耗、提高浮选精煤灰分、保证精煤产率、节约生产成本方面有实践意义。     

矿用直线振动筛结构故障分析

针对煤矿选煤厂直线振动筛工作过程中出现的结构故障问题,采用有限元仿真与现场测试结合的方法对振动筛出现故障的原因进行了分析研究。介绍了振动筛的主要结构及常见故障,并以某矿选煤厂发生大梁断裂的振动筛为例,对该振动筛进行三维建模和有限元模态分析,分析结果表明:随着模态阶次的增加,振型的变化逐渐由移动转为结构本身的扭曲变形。在该振动筛空载工作状态下,选用本质安全型便携式测振记录仪进行振动测试并处理测试信号,得到该振动筛的工作频率。结合模态分析结果和实际测试结果,判断出空载时频繁运行振动筛是造成其大梁断裂的主要原因。根据故障原因给出维护建议:应当尽量避免振动筛在空载或物料较少的状态下长时间运行;在振动筛投入使用前,应预先了解振动筛的工作状态及可能存在的薄弱环节,尽可能避免结构故障,保证振动筛可靠运行。     

三维增材鞋面印花机对位平台的冗余驱动控制策略

针对自动鞋面印花机在进行对版时定位精度低,影响鞋面印刷质量的问题,提出了基于冗余驱动的印花机对位平台。在原有的三轴并联机构对位平台的基础上通过增加1个Y轴,有效地提高了对位平台Y向的刚度和承载能力,从而提高了印花机对位平台的定位精度。由于冗余驱动机构运动过程中存在机构运动耦合,利用几何法进行解耦,提出了基于电子凸轮的控制策略。同时提出了对机构换向间隙补偿的控制策略,进一步提高对位平台的定位精度,保证了鞋面的印刷质量。经过实验验证,改进后的印花机对位平台Y向定位精度提高了85.7%,Z向旋转定位精度提高了72.9%,X向和Y向换向间隙分别提高了50% 和75%,Z向旋转换向间隙提高了42.86%。     

郭庄煤业选煤厂振动筛筛选形式的优化研究

针对郭庄煤业选煤厂振动筛振动筛分方式可靠性差、筛分效率低下、物料筛分率低的难题,本文提出了三种新的振动筛分方案,对不同筛分方案的实际应用效果进行了分析。结果表明三移动一摆动的振动筛分方式对物料的综合分散度最高,稳定性好,该筛分方案已在郭庄煤业选煤厂煤炭筛分过程中得到了全面的应用。     

Characterization of an acrylic polymer under hygrothermal aging as an optically clear adhesive for touch screen panels

Optically clear adhesives (OCAs) are key components of touch screen panels (TSPs). It is important that OCAs do not affect the transparent electrodes in TSPs because OCAs are contacted to the transparent electrodes. Therefore, N-vinyl caprolactam (NVC) was incorporated in the composition of an acrylic pressure sensitive adhesive (PSA) with excluding an acidic component to maintain the cohesion for OCA preparation. With increasing amounts of NVC, the tack and peel strength of UV-cured PSA increased, but high amounts of NVC led to decreased peel strength. The UV-cured PSA films were placed in a high temperature and humidity chamber for 8 weeks to investigate the durability and corrosion property under hygrothermal conditions. In this study, the corrosion test method using copper foil was suggested as a simple and economical method and was used to evaluate the effect of NVC on the corrosion property of PSA. This method helped identify suitable OCAs that do not have corrosive property. PSA films containing more than 20 wt% of NVC promoted the corrosion of copper foil under hygrothermal aging conditions. The caprolactam ring was opened by moisture, and the PSA structure morphed into a polar structure during the aging process. This change caused a glass transition shift, an increase in the storage modulus at the rubbery plateau, and an increase in peel strength. The surface free energy of the PSA films also increased due to the increase in the polar property. However, high amounts of NVC caused a decrease in the peel strength after 8 weeks of aging because of increased molecular interactions.     

Comprehensive tribological study of optimized N-DLC/DLC coatings fabricated by active screen DC-pulsed PACVD technique

The conventional DC-pulsed PACVD method was applied to deposit DLC and N-DLC coatings on AISI H13 substrate. ased on the optimized parameters achieved for single layer, N-DLC/DLC double layer coatings were deposited using two different techniques, namely: conventional and active screen. Chemical bindings and structural evolutions of double-layer coatings were investigated by visible Raman spectroscopy, and X-ray Photoelectron Spectroscopy (XPS). Accordingly, the friction coefficient of the active screen N-DLC/DLC coating at the end of the wear test was obtained about the value of 0.12 which was found to be the lowest among all samples.