Computing approximate blocking probabilities for transparent waveband switching based WDM networks using hierarchical cross-connects

An analytical model is presented to study the dynamics of wavelength division multiplexing (WDM) networks with waveband switching (WBS). The reduced load approximation method is considered to compute approximated network blocking probabilities in WBS-based WDM networks. The analytical model considers the link blocking probability due to insufficient link capacity and an impact of the waveband granularity (G). The analytical model also considers the node blocking probability due to unavailability of a switch port at the wavelength cross connect (WXC) layer of an Hierarchical cross connect (HXC) switch node. The set of nonlinear equations is obtained with the link independence assumption and solved using repeated substitutions. The accuracy of the analytical model is examined by comparing with simulation results considering the random-fit algorithm for waveband and wavelength assignments in different network scenarios. Lightpaths are routed between source and destination (s-d) HXC switch nodes using shortest path first (SPF) routing. An impact of the switch parameter to limit the input and the output WXC switch ports of an HXC switching node is also being investigated using the analytical model as well as through simulation results.     

小尺度交通信号灯的检测与状态识别

交通信号灯识别包括检测和状态识别，在智能交通系统中发挥重要作用。基于YOLOv3算法提出了一种交通信号灯检测与状态识别模型。针对交通信号灯相较于交通场景中其他目标具有尺度小的特性进行了算法的设计：降低骨干网络的下采样倍率以增加小尺度目标的特征描述能力；通过增大特征图的尺度来改进多尺度特征融合；引入广义交并比作为检测任务的损失函数来改进目标边界框的回归效果。同时，根据交通信号灯本身的特性，使用颜色和形状约束的方法对信号灯进行状态识别和类别验证。最后在公开的Bosch交通信号灯数据集上和实际的城区道路进行了实验验证。实验结果表明，所提出的算法能够提升交通信号灯识别的精度和召回率，识别准确率可以达到90%左右。     

基于数值微分核脉冲信号数字处理方法

核反应堆核测量系统测量探测器输出的核脉冲信号，该信号后沿拖尾很长，在计数率较高时容易产生信号堆积和基线漂移等问题，导致源区计数率测量上限仅能达到105 Hz左右。文中基于数值微分方法，采用数字处理技术，在时域上分析了核脉冲信号经过前置放大、信号成形、低通滤波和脉冲甄别后的输出，并利用探测器实测信号进行了仿真。仿真结果表明，基于数值微分的数字处理方法可以实现相邻0.4 μs脉冲信号的识别和测量，将源区测量计数率上限提升到2×106 Hz以上。      

The effect of traffic data source on deterioration rates of heavy-duty flexible pavements

The purpose of this study is to assess the effect of traffic data source (estimated vs. actual) on predicted progression rates of roughness and rutting for heavy-duty flexible pavements of rural freeways. Progression rates are predicted using calibrated HDM-4 models. The assessment is performed in terms of variations in maintenance intervention timing associated with the variations in progression rates. Time series pavement condition data (covering 3–5 years) have been collected for 7 sections of rural freeways for use in calibrating HDM-4 deterioration models. They range in length from 10 to 60.8 km and cover different traffic volumes, climate zones and subgrade soil types. For these sections, estimated annual average daily traffic (AADT), growth factors and assumed loading have been extracted from relevant database. Only six segments of these sections have Weigh-in-Motion (WIM) sites so relevant actual AADT, growth factors and axle load distributions have been extracted from WIM reports. The results of running the calibrated HDM-4 deterioration models using different traffic data show that actual traffic data from WIM sites result in higher rates of deterioration to that of estimated data for four sites, resulting in earlier intervention timing and higher present value agency cost. The other two sites have lower rates with actual data due to lower traffic loading than estimated.     

Applications of sketches in network traffic measurement: A survey

Accurate and timely network traffic measurement is essential for network status monitoring, network fault analysis, network intrusion detection, and network security management. With the rapid development of the network, massive network traffic brings severe challenges to network traffic measurement. However, existing measurement methods suffer from many limitations for effectively recording and accurately analyzing big-volume traffic. Recently, sketches, a family of probabilistic data structures that employ hashing technology for summarizing traffic data, have been widely used to solve these problems. However, current literature still lacks a thorough review on sketch-based traffic measurement methods to offer a comprehensive insight on how to apply sketches for fulfilling various traffic measurement tasks. In this paper, we provide a detailed and comprehensive review on the applications of sketches in network traffic measurement. To this end, we classify the network traffic measurement tasks into four categories based on the target of traffic measurement, namely cardinality estimation, flow size estimation, change anomaly detection, and persistent spreader identification. First, we briefly introduce these four types of traffic measurement tasks and discuss the advantages of applying sketches. Then, we propose a series of requirements with regard to the applications of sketches in network traffic measurement. After that, we perform a fine-grained classification for each sketch-based measurement category according to the technologies applied on sketches. During the review, we evaluate the performance, advantages and disadvantages of current sketch-based traffic measurement methods based on the proposed requirements. Through the thorough review, we gain a number of valuable implications that can guide us to choose and design proper traffic measurement methods based on sketches. We also review a number of general sketches that are highly expected in modern network systems to simultaneously perform multiple traffic measurement tasks and discuss their performance based on the proposed requirements. Finally, through our serious review, we summarize a number of open issues and identify several promising research directions.     

KSUTraffic: A Microscopic Traffic Simulator for Traffic Planning in Smart Cities

Simulation is a powerful tool for improving, evaluating and analyzing the performance of new and existing systems. Traffic simulators provide tools for studying transportation systems in smart cities as they describe the evolution of traffic to the highest level of detail. There are many types of traffic simulators that allow simulating traffic in modern cities. The most popular traffic simulation approach is the microscopic traffic simulation because of its ability to model traffic in a realistic manner. In many cities of Saudi Arabia, traffic management represents a major challenge as a result of expansion in traffic demands and increasing number of incidents. Unfortunately, employing simulation to provide effective traffic management for local scenarios in Saudi Arabia is limited to a number of commercial products in both public and private sectors. Commercial simulators are usually expensive, closed source and inflexible as they allow limited functionalities. In this project, we developed a local traffic simulator “KSUtraffic” for traffic modeling, planning and analysis with respect to different traffic control strategies and considerations. We modeled information specified by GIS and real traffic data. Furthermore, we designed experiments that manipulate simulation parameters and the underlying area. KSUTraffic visualizes traffic and provides statistical results on the simulated traffic which would help to improve traffic management and efficiency.     

运营高速公路 40m 预制箱梁拆换施工技术研究

对于运营高速公路40m箱梁拆换施工，梁体的切割、吊装、运输、架设等受作业空间和环境的限制，增加了施工困难和风险，新旧箱梁在高速公路上的长距离运输为施工增加了成本和安全风险，同时也决定了箱梁拆换的总体进度。韩河大桥梁体拆换工程按期顺利实施完成，有效化解了以上问题，取得了良好的经济、社会效益。     

数字化核电厂班组SSA测度方法与实验研究

情景意识(SA)问题在数字化核电厂中更为突出。为识别班组共享情景意识（SSA）水平及行为形成因子（PSF）对班组SSA的影响，基于情景意识全面评估技术（SAGAT）建立一种班组SSA测量和计算方法并进行模拟机实验。结果表明，个体SA（ISA）水平与SSA水平有关，ISA级别越高，SSA级别越高；ISA和班组SSA都受到PSF的影响，PSF的状态水平越高，ISA和SSA的水平越高；对于不同的实验场景，操纵员的ISA水平和班组SSA水平不同，这表明风险场景的症状越明显及知识经验水平越好，ISA和SSA水平就越高。最后，通过被试的自评价识别当前PSF的状态水平，主要不良的PSF是班组沟通和合作水平、压力水平、人-机界面等。这些评估结果为提高数字化核电厂人因可靠性和安全水平提供了理论支持。     

基于高斯混合隐马尔科夫模型与人工神经网络的紧急换道行为预测方法

为了有效降低因驾驶员紧急换道行为而诱发的交通事故，提高道路交通事故链阻断效率，提出一种基于高斯混合隐马尔科夫模型（GMM-HMM）和人工神经网络（ANN）的紧急换道行为预测方法。首先利用GMM-HMM对车辆行驶状态以及驾驶行为连续观察序列进行换道意图辨识，采用ANN预测下一时段的驾驶行为，再预测换道过程中的横向加速度变化率，从而判断紧急换道的危险程度。驾驶员在环仿真实验及实车实验结果表明，该方法预测避险成功率达92.83%，实验避险成功率达90.32%。该方法能有效地对紧急换道行为进行提前警告与干预。     

Study of traffic characteristics based on internet web real-time traffic conditions by image identification technology

With the rapid development of Internet, it is increasingly convenient to obtain real-time traffic condition information, which has greatly stimulated the improvement of urban traffic guidance. Traffic conditions are generally divided into four grades in the existing network platform, which are expressed in different colours. The understanding of traffic condition is still at the level of abstract senses. Therefore, it is difficult to grasp the characteristics of urban traffic. To this end, a new idea is proposed in this paper, and the new idea is to study the urban traffic characteristics based on real-time traffic condition information extraction with image identification technology. With this method, we can not only quantify the abstract traffic condition information, but also solve the loss of traffic condition information. In addition, an instance is analysed in this paper, it shows that it can provide references for urban traffic organization management very well.