Efficient QoS support in a slotted multihop WDM metro ring

A novel distributed access protocol for a slotted wavelength-division-multiplexing (WDM) metro ring employing all-optical packet switching and supporting quality-of-service (QoS) classes is presented and analyzed. Since we assume that there are more nodes than available wavelengths in the network, we obtain a scalable multihop WDM ring as underlying network architecture. By dividing each channel into several time slots and further applying destination release and slot reuse, data packets can be efficiently transmitted and received in a statistically multiplexed manner. In our architecture, each node is equipped with one tunable transmitter and one fixed-tuned receiver. Furthermore, as we generally consider so-called a posteriori access strategies, different packet selection schemes are proposed and compared. An analytical model based on the semi-Markov process methodology is developed to quantify the performance of one of these schemes. As a key element of the protocol, an efficient QoS support access mechanism is proposed and its performance is evaluated. The new QoS control scheme adopts a frame-based slot reservation strategy including connection setup and termination, which only slightly increases the signaling and node processing overhead. Thus, an efficient hybrid protocol combining connectionless and connection-oriented packet transmissions is proposed     

A modified genetic algorithm for forecasting fuzzy time series

Fuzzy time series approaches are used when observations of time series contain uncertainty. Moreover, these approaches do not require the assumptions needed for traditional time series approaches. Generally, fuzzy time series methods consist of three stages, namely, fuzzification, determination of fuzzy relations, and defuzzification. Artificial intelligence algorithms are frequently used in these stages with genetic algorithms being the most popular of these algorithms owing to their rich operators and good performance. However, the mutation operator of a GA may cause some negative results in the solution set. Thus, we propose a modified genetic algorithm to find optimal interval lengths and control the effects of the mutation operator. The results of applying our new approach to real datasets show superior forecasting performance when compared with those obtained by other techniques.     

Surface modification of polyester and polyamide fabrics by low frequency plasma polymerization of acrylic acid

In this study, the surface characteristics of polyester and polyamide fabrics were changed by plasma polymerization technique utilizing acrylic acid as precursor. This monomer was used to produce hydrophilic materials with extended absorbency. The hydrophilicity, total wrinkle recovery angle (WRA°) and breaking strength of the fabrics were determined prior and after plasma polymerization treatment. The modification of surfaces was carried out at low pressure (<100 Pa) and low temperature (<50°C) plasma conditions. The effects of exposure time and discharge power parameters were optimized by comparing properties of the fabrics before and after plasma polymerization treatments. It was shown that two sides of polyester fabric samples were treated equally and homogeneously in plasma reactor. For polyester fabrics, the minimum wetting time, 0.5 s, was observed at two plasma processing parameters of 10 W–45 min and 10 W–20 min, where untreated fabric has a wetting time of 6 s. For polyester fabrics, the maximum value was obtained at 60 W–5 min with the wrinkle recovery angle of 306° where the untreated fabric has 290°. The optimum plasma conditions for polyamide fabrics were determined as 30 W–45 min where 2 s wetting time was observed. Wrinkle recovery angle of untreated polyamide fabric was 264°. In this study, after plasma polymerization of acrylic acid, wrinkle recovery angle values were increased by 13%. No significant change was observed in breaking strength of both fabrics after plasma treatment. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2318–2322, 2007     

Episodic memory and metamemory in Parkinson’s disease patients.

This study investigated episodic memory and metamemory for verbs and nouns in patients who have cognitive impairments associated with Parkinson’s disease (PD). PD patients and healthy control participants were asked to recall word pairs and provide feeling-of-knowing (FOK) judgments for the items they were unable to recall. This was followed by a 4-alternative recognition test. PD patients were impaired in both recall and recognition, compared with controls. In terms of metamemory, PD patients were less confident in their ability to recognize the unrecalled items in a future recognition test. Most important, accuracy of PD patients’ FOK judgments was not above chance and was lower than that of control participants. The PD group correctly recognized fewer verbs than nouns, but type of material (verb vs. noun) had no impact on recall or FOK judgments. In addition, contribution of executive functions to FOK accuracy was different in PD patients and controls. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A Study on Glutaric Acid Extraction by Tridodecylamine: Equilibria and Models

The extraction of glutaric acid was studied using tridodecyl amine (TDA) with respect to the functional groups of the diluent. The diluents studied were 1‐octanol (alcohol), methyl isobuthyl ketone, MIBK (ketone), and toluene (aromatic hydrocarbon) and these were used to dilute the TDA. The experimental results of batch extraction experiments are reported as distribution coefficients, D_C, loading factors, Z, and extraction efficiency, E. All measurements were carried out at 298.15 K. The results of the liquid‐liquid equilibrium measurements are correlated by a linear solvation energy relationship (LSER) model that takes into account physical interactions and modified Freundlich and Langmuir equations. The experimental results are compared with model results.     

Methanol tolerant electrocatalysts for the oxygen reduction reaction

Direct methanol fuel cells (DMFCs) represent an interesting alternative in obtaining electricity in a clean and efficient way. Portable power sources are one of the most promising applications of passive DMFCs. One of the requirements in these devices is to use high alcohol concentration, which due to methanol crossover causes a considerable loss of fuel cell efficiency. In order to develop methanol tolerant cathodes with suitable activity, different supported catalysts namely PtCo/C and PtCoRu/C, were prepared either via ethylene glycol reduction (EG) with or without microwave heating assistance (MW) or via the alloy method, the latter followed by a thermal treatment in a reducing atmosphere (N₂/H₂). All cathode-catalysts were tested to determine the role of the components in simultaneously enhancing the oxygen reduction reaction (ORR) and discouraging the methanol oxidation reaction. According to the synthesis methodology, X-ray photoelectron spectra showed that the amount of metal oxides on the surface varies, being higher on the PtCo/C EG and PtCoRu/C EG catalysts. The electrochemical characterization of the catalysts was accomplished in a three electrodes electrochemical cell with a glassy carbon rotating disk electrode covered with a thin catalytic film as working electrode. To study the ORR and the influence of different methanol concentrations, linear sweep voltammetry and cyclic voltammetry were employed. The PtCo/C EG, with an important metal oxide amount on the surface, and the PtCoRu/C MW and EG electrodes, both with RuO₂ on their surfaces, were the most tolerant to methanol presence.     

Investigation of current‐voltage characteristics and current conduction mechanisms in composites of polyvinyl alcohol and bismuth oxide

Temperature dependent current‐voltage (I–V) measurements of Au/Polyvinyl Alcohol + Bi₂O₃/n‐Si structure were conducted between 100 and 350 K for investigating the temperature dependence of I–V characteristics and current conduction mechanisms in the structure. Series resistance of the structure is calculated using Ohm's law and Cheungs' method. Ideality factor (n) and zero‐bias barrier height (Φ_Bo) were obtained considering thermionic emission theory. From 100 to 350 K, n changed from 32.1 to 3.54, and Φ_Bo changed from 0.27 to 0.99 eV. Obtained temperature dependent values of n and Φ_Bo suggested that thermionic emission is not the dominant current conduction mechanism. Therefore, Ln(I)–Ln(V) curves of the studied structure were plotted for investigating current conduction mechanisms in the structure and current flow is explained considering space charge limited current. Moreover, density of interface states (D_it) in the structure were calculated and its temperature dependence was investigated such that D_it values are reduced to the order of ～10¹³ eV^?1 cm^?2 from ～10¹⁴ eV^?1 cm^?2 with increasing temperature. POLYM. ENG. SCI., 54:1811–1816, 2014. © 2013 Society of Plastics Engineers     

A Review of Dehydration of Various Industrial Sludges

Wastewater characteristics and sludge generation potential of point source categories are reviewed critically. Novel industry-specific sludge dewatering/drying solutions necessary to establish a sustainable model are examined through a detailed literature survey. Knowledge of sludge properties is one of the most critical issues needed to design dewatering/drying equipment. This study focuses on industrial wastewater/sludge characterization. In addition, a comprehensive review of current drying models and technologies is also presented. A summary of the results derived from a novel thin-film-based photonic sludge dewatering/drying study is outlined as an alternative approach for industrial sludge control. Sludge was dried in a tubular quartz reactor (TQR), the inner surface of which was coated with a TiO₂ thin film. The TQR was irradiated with UV A, UV B, and UV C lamps. The consumed and generated energy fluxes through endergonic and exergonic reactions driven by photolysis and photocatalysis were investigated. In addition, the variations in sludge dewatering/drying characteristics were also examined and compared with conventional methods to evaluate the energy requirements.