BRAF Gene and Melanoma: Back to the Future

As widely acknowledged, 40–50% of all melanoma patients harbour an activating BRAF mutation (mostly BRAF V600E). The identification of the RAS–RAF–MEK–ERK (MAP kinase) signalling pathway and its targeting has represented a valuable milestone for the advanced and, more recently, for the completely resected stage III and IV melanoma therapy management. However, despite progress in BRAF-mutant melanoma treatment, the two different approaches approved so far for metastatic disease, immunotherapy and BRAF+MEK inhibitors, allow a 5-year survival of no more than 60%, and most patients relapse during treatment due to acquired mechanisms of resistance. Deep insight into BRAF gene biology is fundamental to describe the acquired resistance mechanisms (primary and secondary) and to understand the molecular pathways that are now being investigated in preclinical and clinical studies with the aim of improving outcomes in BRAF-mutant patients.     

Preparation and characterization of light‐cured methacrylate/montmorillonite nanocomposites

Polymer/clay nanocomposites were prepared from dimethacrylate monomers, commonly used in dental restorative resins, and an organically modified silicate (montmorillonite). The photopolymerization process was hardly affected by the presence of the silicate filler, and thus 2 mm thick samples containing 3 wt% clay were extensively cured. Transmission electron microscopy revealed that the montmorillonite platelets were either intercalated or exfoliated. Nevertheless, for all formulations, intermediate‐sized aggregates of about 1 µm were present and their fraction increased as the amount of filler increased. The presence of the clay was found to have no major effect on the flexural modulus and compressive yield strength of the nanocomposites. Moreover, the water uptake of nanocomposites containing 3 wt% clay was about 10–15% higher than that of unfilled monomers. Modification of the clay surface with alternative organic cations is certainly necessary in order to achieve an optimal dispersion of the clay in the polymer matrix. Copyright © 2010 Society of Chemical Industry     

trans Fatty Acids in Colostrum,Mature Milk and Diet of Lactating Adolescents

The purpose of this study was to investigate the trans fatty acids (TFA) content and distribution in colostrum, mature milk, and diet of adolescent mothers, after TFA declaration in food labels became mandatory in Brazil. Participants were healthy adolescents (n 54, 15–19 years, 1–90 days postpartum) practicing exclusive breastfeeding. Milk samples were collected 3 days after delivery (colostrum) and in the third month postpartum (mature milk) by hand expression. The fatty acid composition of the milk samples was determined by gas chromatography. TFA intake corresponded to 1.23 % of total energy value. Total 18:2 TFA accounted for less than 0.5 % of the energy intake. The amount of total 18:1 TFA (mean ± SEM) was 1.9 % ± 0.14 in colostrum and 1.5 % ± 0.2 in mature milk. The total content of n‐3 PUFA was inversely correlated with the total content of 18:1 TFA in colostrum. Both in colostrum and in mature milk, vaccenic acid (11t‐18:1) was found to be the most abundant 18:1 trans isomer, followed by elaidic acid (9t‐18:1), whereas rumenic acid (9c,11t‐18:2 CLA) was the predominant 18:2 trans isomer. In conclusion, the levels of TFA of industrial sources found in the mother's diet and breast milk (colostrum and mature milk) showed a decrease in relation to those observed in studies conducted prior to the TFA labeling resolution in Brazil. However, the current low intake levels of n‐3 LCPUFA and DHA content in the milk of lactating adolescents may be insufficient for supporting adequate neurological development of the infants.     

Influence of Bacillus subtilis cell walls and EDTA on calcite dissolution rates and crystal surface features

This study investigates the influence of EDTA and the Gram-positive cell walls of Bacillus subtilis on the dissolution rates and development of morphological features on the calcite [1014] surface. The calcite dissolution rates are compared at equivalent saturation indicies (SI) and relative to its dissolution behavior in distilled water (DW). Results indicate that the presence of metabolically inactive B. subtilis does not affect the dissolution rates significantly. Apparent increases in dissolution rates in the presence of the dead bacterial cells can be accounted for by a decrease of the saturation state of the solution with respect to calcite resulting from bonding of dissolved Ca2+ by functional groups on the cell walls. In contrast, the addition of EDTA to the experimental solutions results in a distinct increase in dissolution rates relative to those measured in DW and the bacterial cell suspensions. These results are partly explained by the 6.5-8 orders of magnitude greater stability of the Ca-EDTA complex relative to the Ca-B. subtilis complexes as well as its free diffusion to and direct attack of the calcite surface. Atomic force microscopy images of the [1014] surface of calcite crystals exposed to our experimental solutions reveal the development of dissolution pits with different morphologies according to the nature and concentration of the ligand. Highly anisotropic dissolution pits develop in the early stages of the dissolution reaction at low B. subtilis concentrations (0.004 mM functional group sites) and in DW. In contrast, at high functional group concentrations (4.0 mM EDTA or equivalent B. subtilis functional group sites), dissolution pits are more isotropic. These results suggest that the mechanism of calcite dissolution is modified by the presence of high concentrations of organic ligands. Since all the pits that developed on the calcite surfaces display some degree of anisotropy and dissolution rates are strongly SI dependent, the rate-limiting step is most likely a surface reaction for all systems investigated in this study. Results of this study emphasize the importance of solution chemistry and speciation in determining calcite reaction rates and give a more accurate and thermodynamically sound representation of dead bacterial cell wall-mineral interactions. In studies of natural aquatic systems, the presence of organic ligands is most often ignored in speciation calculations. This study clearly demonstrates that this oversight may lead to an overestimation of the saturation state of the solutions with respect to calcite and thermodynamic inconsistencies.     

Metal selectivity of Sargassum spp. and their alginates in relation to their alpha-L-guluronic acid content and conformation

The discovery of a consistent and unusual enrichment in homopolymeric alpha-L-guluronic acid G-blocks in alginates extracted from a suite of Sargassum brown algae is described in this study. 1H NMR spectroscopy was used to characterize these alginates which display homopolymeric guluronic acid block (G-block) frequency values (F(GG)) between 0.37 and 0.81. The presence of these G-blocks results in an enhanced selectivity for cadmium or calcium relative to monovalent ions such as sodium and the proton as well as smaller divalent ions such as magnesium. Results of competitive exchange experiments for the Cd-Ca-alginate system yield selectivity coefficient, K*(Cd)Ca, values between 0.43 +/- 0.10 and 1.32 +/- 0.02 for a range in F(GG) of 0.23 to 0.81. In contrast to the Cd-Ca-alginate system, the Mg-Ca-alginate and Mg-Cd-alginate systems yielded maximum values of K*(Mg)Ca (18.0 +/- 1.4) and K*(Mg)Cd (16.0 +/- 0.9) for the alginates extracted from Sargassum fluitans (F(GG) = 0.81; Cuba) and Sargassum thunbergii (F(GG) = 0.75; Korea), respectively. Selectivity studies with mixed-metal pair alginate systems highlight the importance of the specific macromolecular conformation of the alginate polymer in determining metal binding behavior in multiple-metal systems. Furthermore, they demonstrate the importance of the conformation of the alginate as it occurs within the tissue of Sargassum in determining the metal binding behavior of this algal biosorbent. The unique composition of the alginates present in species of Sargassum may represent a distinct advantage over other brown algal species when considering their implementation for the strategic removal of toxic heavy metals from contaminated and industrial wastewaters.     

Performance in a complex task and breathing under odor exposure

We investigated the influences of odor exposure on performance and on breathing measures. The task was composed of tracking, short-term memory, and peripheral reaction parts. During rest or while performing the task, 12 participants were exposed to 4 different odors in 2 intensities. The higher intensity of the malodors induced a short-term decrement in mean inspiration flow (Vi/Ti) after stimulus onset and impaired performance in the short-term memory task, as compared with control trials; no effect was found for the positively judged odors. The study suggests that a distractor as simple as a bad smell may pull a person off task, however briefly, and may result in a detriment to performance. Actual or potential applications of this research involve designing or securing tasks in such a way that a brief withdrawal of attention does not have fatal consequences.     

西九文化区

正OMA发展西九文化区,必须面对一项挑战:将一个盛载政府极大抱负,以及持分者多元利益的超大型多用途项目,转化成一个既有趣又严肃、既有规划又允许即兴、既中国化又国际化的文化区。这个文化区规模庞大,但不失亲密融洽的感觉;富地标性,但十分谦和;容易理解,却能带来惊喜。为避免造成过分冲击,OMA采纳了一种每个香港市民都熟悉的建筑类型作为方案的发展     

XiSystem: a XiRisc-based SoC with reconfigurable IO module

In the nanometer era, the increase in nonrecurring engineering costs is a challenge for SoCs that can be faced through a standardization process. Hardware specialization of a standard platform to a given application can be achieved by exploiting reconfigurable technology. This paper presents a XiSystem SoC, which integrates two different field-programmable devices to provide application-specific computing blocks and IOs. A XiRisc reconfigurable processor is exploited to achieve more than one order of magnitude speed-up and energy consumption reduction vis-a/spl grave/-vis a DSP-like processor, while an eFPGA is integrated in the system in order to make it flexible enough to support various IO ports and protocols. The reconfigurable IO device is also utilized for pre/post data processing and implementation of some standard computational blocks.     

Neuropsychological slowness in obsessive-compulsive patients. Is it confined to tests involving the fronto-subcortical systems?

BACKGROUND: Although it is acknowledged that obsessive-compulsive (OC) patients may be slower than healthy controls in performing neuropsychological tests, speed has usually been treated as a confounding variable. It is possible, however, that the slower performance of OC patients is itself the result of a dysfunction of specific neural circuits (in particular of fronto-subcortical systems). METHOD: A neuropsychological battery including tests sensitive to fronto- and temporo-subcortical dysfunction was administered to a group of OC patients and a group of healthy controls. Each test provided independent indices of accuracy and speed. RESULTS: OC patients were significantly slower than controls only when performing tasks involving the fronto-subcortical systems, whereas they did not differ from controls with respect to accuracy indices. CONCLUSION: It may be that neuropsychological slowness of OC patients is not merely an epiphenomenon of meticulous concern for correct test execution or intrusion of obsessive thoughts, but reflects the dysfunction of fronto-subcortical systems.     

Beam pattern synthesis for line arrays subject to upper and lower constraining bounds

A technique is described for synthesizing the coefficients of an antenna array which satisfy a constrained minimax criterion. Inhibition regions can be formed in the beam pattern and placed advantageously in directions associated with strong sources of interference. Modified Dolph-Chebyshev beam patterns are obtained by imposing upper and lower constraining bounds on the beam pattern over regions of directions in space. Specific examples are presented for line arrays.