Optimize Routing Protocol Overheads in MANETs: Challenges and Solutions: A Review Paper

Wireless Personal Communications - Routing is one of the most challenging task in mobile ad hoc networks. Several works have been proposed to address this challenge. Majority numbers of researchers...     

Behavior of 316L stainless steel containing corrosion pits under cyclic loading

The environmental performance of 316L grade stainless steel, in the form of tensile specimens containing a single corrosion pit with various aspect ratios, under cyclic loading in aerated chloride solutions is investigated in this study. Results from environmental tests were compared and contrasted with those obtained using finite element analysis (FEA). Fractography of the failed specimens obtained from experiments revealed that fatigue crack initiation took place at the base of the shallow pit. The crack initiation shifted towards the shoulder and the mouth of the pit for pits of increasing depth. This process is well predicted by FEA, as the strain contour maps show that strain is the highest around the centric strip of the pit. However, for shallow pits, local strain is uniformly distributed around that strip but begins to concentrate more towards the shoulder and the mouth region for increasingly deep pits.     

Systematic convergence of nonlinear stochastic estimators on the Special Orthogonal Group SO(3)

This paper introduces two novel nonlinear stochastic attitude estimators developed on the Special Orthogonal Group with the tracking error of the normalized Euclidean distance meeting predefined transient and steady‐state characteristics. The tracking error is confined to initially start within a predetermined large set such that the transient performance is guaranteed to obey dynamically reducing boundaries and decrease smoothly and asymptotically to the origin in probability from almost any initial condition. The proposed estimators produce accurate attitude estimates with remarkable convergence properties using measurements obtained from low‐cost inertial measurement units. The estimators proposed in continuous form are complemented by their discrete versions for the implementation purposes. The simulation results illustrate the effectiveness and robustness of the proposed estimators against uncertain measurements and large initialization error, whether in continuous or discrete form.     

Thermodynamic and Kinetic Studies of Uranium and REEs Leaching by Oxalic Acid from Abu-Tartur Phosphate Rock,Western Desert,Egypt

Radiochemistry - Leaching of uranium and REEs with oxalic acid from the Egyptian Abu-Tartur phosphate rock (PR) was studied. The effect exerted on the leaching process by oxalic acid concentration,...     

Activation process-dependent characteristics of novel thermionic oxide cathodes for CRT application

The emission and conductivity characteristics of oxide cathodes depend largely on the activation process. In this paper, the electrical properties of new type of oxide cathodes for cathode ray tube (CRT) application, supplied by LG Philips Displays, have been investigated in relation to different cathode activation regimes. The influence of the activation process over different durations has been investigated. A temperature of T=1425 K was chosen to be higher than the optimum cathode activation temperature (T=1200 K), and the other temperature of T=1125 K was lower than that. The electron activation energy (E) was found to vary in the range from 0.58 to 2.28 eV for cathodes activated at the higher temperature regime, and from 1.08 to 1.9 eV for those activated at the lower temperature regime. Scanning electron microscopy (SEM) and electron diffraction X-ray (EDX) analyses show a structural phase transformation in the oxide material that was activated at 1125 K for a period of 1-12 hours. The SEM mapping shows a large contamination of Ba in the top layer of oxide material. The activator agents tungsten and aluminum are found to penetrate into the BaO/spl bsol/SrO layer in two different ways.     

Estimation of the Equilibrium Constants for Pure Hydrocarbons

Equilibrium constants of pure hydrocarbons in different temperatures and pressures are necessary in most engineering calculations. A general formula has been developed to calculate equilibrium value for a group of hydrocarbons which have the general formula C_n H_2n+2 and C_n H_2n based on three parameters. This formula is a function of reduced temperature, reduced pressure, and an acentric factor. It is applied within a wide range of temperatures and pressures. As a result this technique is considered to be useful for the predication of K values of pure hydrocarbons depending on its reduced temperature, reduced pressure, and acentric factor.     

Diffusion Coefficient of a Binary Liquid System

A generalized diffusion coefficient correlation for a binary system of liquids has been developed to represent the data for a wide range of temperatures. Detailed analysis shows that the proposed correlation fits the experimental measurements of diffusivity with the corresponding calculated values with an acceptable percentage error.     

The Ni3Al-Ni3Cr-Ni3Ru section of the Ni-Cr-Al-Ru system

An investigation is reported of the 75 at% nickel section of the Ni-Cr-Al-Ru system at 1523 and 1273 K. Constitutional data obtained by electron probe microanalysis, X-ray diffraction and microscopical examination are presented as partial isothermal sections. At 1523 K, the major part of the section consists of phase, while the aluminium-rich region contains a and+ region; the extent of the solid solution of chromium and ruthenium in totals ~ 4 at%. The ruthenium-rich corner of the section shows a two-phase region consisting of + ruthenium-rich solid solution. At 1273 K the,+ and + ruthenium regions increase in extent. The/ mismatch values in the equilibrated alloys studied lie in the range ~ –0.08 to –0.39%. Constitutional features of as-cast alloys are also reported.     

基于LSTM的阀冷系统入水温度及冷却裕度预测

为解决换流站阀冷系统状态缺乏智能预测手段和极端工况下冷却能力是否充裕难以评估的问题,提出基于长短期记忆网络(long short-term memory, LSTM)的换流阀冷却裕度预测方法。在阀冷系统冷却裕度指标量化评估的基础上,考虑多源影响因素,通过相关性强弱选择特征量并构建数据样本集,利用长短时记忆网络建立预测模型,并基于大量实际样本数据进行训练,对入水温度和冷却裕度发展趋势做出预测、提前预警,同时提供极端工况下冷却裕度的分析模型,为现场处理决策提供依据。通过穗东换流站的实例分析,验证了算法的有效性和可行性。