Analytical modeling of imperfect bond between coated fibers and matrix material

The present study is intended to find the stress intensity factors (SIF) and strain energy release rates (SERR) at the tips of an interface crack in a non-homogeneous medium. The boundary-value problem governing a three-phase concentric cylinders model is used to analyze annular interfacial crack problems with Love's strain functions. The complex form of a singular integral equation of second kind is formulated using Bessel's functions in Fourier domain. Stress intensity factors (SIF) and total strain energy release rates (SERR) are calculated using Jacoby polynomials. For validity of the equations of Stress Intensity Factors, the Singular Integral Equation (SIE) of a three concentric cylinders model is reduced to the SIE for a two concentric cylinders model and results are compared with previous results of Erdogan.     

Phase-amplitude coupling factor of single-mode gain-switchedInGaAsP laser diodes

The phase amplitude coupling factor (α-factor) of gain-switched InGaAsP laser diodes is deduced from chirp measurements. A tunable laser scheme makes it possible to obtain the wavelength dependence of α over ~40 nm. The α-values are found to be higher than those deduced from spontaneous emission spectra below threshold. It is shown that the difference is explained by the dependence of α with carrier density. Time-resolved measurements of spontaneous emission during pulse buildup reveal that the carrier density at maximum can be 1.5 times higher than the threshold carrier density. Experimental evolutions of α are well reproduced by calculations     

New integrated buried laser-ridge modulator with identical active layer

Integrated laser modulators are attractive devices for wavelength-division-multiplexing optical systems due to their compactness, high output power, and low cost. Their fabrication simplicity is a way to decrease further the transmitter cost and address new opening markets of short range and metropolitan networks. We report a new integration scheme electroabsorption-modulator distributed feedback (DFB) laser based on well-established industrial solutions for discrete buried ridge (BRS) DFB lasers and discrete shallow ridge modulators. Processing simplification with an identical active layer has been possible due to a good behavior of strongly positively detuned BRS lasers. The integrated devices demonstrated 30-dB extinction ratio with 10-GHz bandwidth and P/sub out/=10 dBm for emission in 1.55-/spl mu/m range.     

Response time variability

Response time variability is a new optimization problem with a broad range of applications and a distinctive number of theoretic flavour. The problem occurs whenever events, jobs, clients or products need to be sequenced so as to minimize the variability of time for which they wait for the next turn in obtaining the resources necessary for their advance. The problem has numerous real-life applications. We study its computational complexity, present efficiency, polynomial time algorithms for some cases, and the NP-hardness proof for a general problem. We propose a position exchange heuristic and apply it to improve the total response time variability of an initial sequence. The latter is the optimum bottleneck sequence, Webster or Jefferson sequence of the apportionment, or a random sequence. We report on computational experiments with the heuristic.     

Characterization of Apo-Form Selective Inhibition of Indoleamine 2,3-Dioxygenase**

Indoleamine-2,3-dioxygenase 1 (IDO1) is a heme-containing enzyme that catalyzes the rate-limiting step in the kynurenine pathway of tryptophan (TRP) metabolism. As it is an inflammation-induced immunoregulatory enzyme, pharmacological inhibition of IDO1 activity is currently being pursued as a potential therapeutic tool for the treatment of cancer and other disease states. As such, a detailed understanding of the mechanism of action of IDO1 inhibitors with various mechanisms of inhibition is of great interest. Comparison of an apo-form-binding IDO1 inhibitor (GSK5628) to the heme-coordinating compound, epacadostat (Incyte), allows us to explore the details of the apo-binding inhibition of IDO1. Herein, we demonstrate that GSK5628 inhibits IDO1 by competing with heme for binding to a heme-free conformation of the enzyme (apo-IDO1), whereas epacadostat coordinates its binding with the iron atom of the IDO1 heme cofactor. Comparison of these two compounds in cellular systems reveals a long-lasting inhibitory effect of GSK5628, previously undescribed for other known IDO1 inhibitors. Detailed characterization of this apo-binding mechanism for IDO1 inhibition might help design superior inhibitors or could confer a unique competitive advantage over other IDO1 inhibitors vis-à-vis specificity and pharmacokinetic parameters.     

Damage localization for beams based on the wavelet correlation operator

The continuous wavelet transform (CWT) is one of the crucial damage identification tools in the vibration-based damage assessment. Because of the vanishing moment property, the CWT method is capable of featuring damage singularity in the higher scales, and separating the global trends and noise progressively. In the classical investigations about this issue, the localization property of the CWT is usually deemed as the most critical point. The abundant information provided by the scale-domain information and the corresponding effectiveness are, however, neglected to some extent. Ultimately, this neglect restricts the sufficient application of the CWT method in damage localization, especially in noisy conditions. In order to address this problem, the wavelet correlation operator is introduced into the CWT damage detection method as a post-processing. By means of the correlations among different scales, the proposed operator suppresses noise, cancels global trends, and intensifies the damage features for various mode shapes. The proposed method is demonstrated numerically with emphasis on characterizing damage in noisy environments, where the wavelet scale Teager-Kaiser energy operator is taken as the benchmark method for comparison. Experimental validations are conducted based on the benchmark data from composite beam specimens measured by a scanning laser vibrometer. Numerical and experimental validations/comparisons present that the introduction of wavelet correlation operator is effective for damage localization in noisy conditions.     

Variational implicit surface meshing

In this paper, we propose a new algorithm to mesh implicit surfaces which produces meshes both with a good triangle aspect ratio as well as a good approximation quality. The number of vertices of the output mesh is defined by the end-user. For this goal, we perform a two-stage processing: an initialization step followed by an iterative optimization step. The initialization step consists in capturing the surface topology and allocating the vertex budget. The optimization algorithm is based on a variational vertices relaxation and triangulation update. In addition a gradation parameter can be defined to adapt the mesh sampling to the curvature of the implicit surface. We demonstrate the efficiency of the approach on synthetic models as well as real-world acquired data, and provide comparisons with previous approaches.     

Characterisation of four popular Polish hop cultivars

Polish cultivars of hop (Humulus lupulus L.) are well known as aroma and bitter raw material in the brewing industry. To characterise four popular Polish hop cultivars, Lubelski (Lublin), Marynka, Sybilla and Iunga (also known as Junga), the essential oil profiles were determined by gas chromatography/flame ionisation detector (GC‐FID) and gas chromatography/chemical ionisation mass spectrometry (GC‐CIMS) and the alpha/beta acids amounts by high‐performance liquid chromatography/diode array detector (HPLC‐DAD) analysis. In addition, the multivariate statistical analysis of the volatile profiles was performed. The results obtained evidenced qualitative and quantitative differences between the four cultivars studied and the foreign hops described in the literature. Lubelski and Iunga showed the typical chemical profile of the fine‐aroma and high‐alpha cultivars, respectively. In Marynka and Sybilla, the average amounts of alpha acids were similar to the bitter hops, but with a volatile profile characteristics of the fine‐aroma and aroma cultivars respectively.     

Contact conductivity detection in poly(methyl methacrylate)-based microfluidic devices for analysis of mono- and polyanionic molecules

An on-column contact conductivity detector was developed for the analysis of various mono- and polyanionic compounds separated by electrophoresis chips fabricated in poly(methyl methacrylate) (PMMA) using hot embossing techniques from Ni electroforms. The detector consisted of a pair of Pt wires (127 microm diameter) with an end-to-end spacing of approximately 20 microm and situated within the fluidic channel. The waveform applied to the electrode pair was a bipolar pulse with a frequency of 5.0 kHz and was used to reduce the charging current from measurement so that the current recorded at the end of one pulse is more representative of the solution conductivity. Using the detector, separations of amino acids, peptides, proteins, and oligonucleotides were demonstrated. For the amino acids and peptides, free-solution zone electrophoresis was performed. A calibration plot for the amino acid alanine was found to be linear from approximately 10 to 100 nM in a carrier electrolyte consisting of 10 mM triethylamonium acetate. The concentration detection limit was found to be 8.0 nM, with the corresponding mass detection limit equal to 3.4 amol (injection volume = 425 pL). The protein separations with conductivity detection were performed using MEKC, in which the carrier electrolyte contained the anionic surfactant sodium dodecyl sulfate (SDS) above its cmc. Near baseline resolution was achieved in the PMMA microchip for a solution containing 8 different proteins. In the case of the DNA fragments, capillary electrochromatography was used with a C18-modified PMMA chip and a carrier electrolyte containing an ion-pairing agent.     

Fast connected-component labelling in three-dimensional binary images based on iterative recursion

We propose two new methods to label connected components based on iterative recursion: one directly labels an original binary image while the other labels the boundary voxels followed by one-pass labelling of non-boundary object voxels. The novelty of the proposed methods is a fast labelling of large datasets without stack overflow and a flexible trade-off between speed and memory. For each iterative recursion: (1) the original volume is scanned in the raster order and an initially unlabelled object voxel v is selected, (2) a sub-volume with a user-defined size is formed around the selected voxel v, (3) within this sub-volume all object voxels 26-connected to v are labelled using iterations; and (4) subsequent iterative recursions are initiated from those border object voxels of the sub-volume that are 26-connected to v. Our experiments show that the time-memory trade-off is that the decrease in the execution time by one-third requires the increase in memory size by 3 orders. This trade-off is controlled by the user by changing the size of the sub-volume. Experiments on large three-dimensional brain phantom datasets (362 × 432 × 362 voxels of 56 MB (megabytes)) show that the proposed methods are three times faster on the average (with the maximum speedup of 10) than the existing iterative methods based on label equivalences with less than 1 MB memory consumption. Moreover, our algorithms are applicable to any dimensional data and are less dependant on the geometric complexity of connected components.