Caught between historical experience and high hopes: automation atthe Dutch Postal Cheque and Clearing Service, 1950-1965

Since the Netherlands lacks an indigenous computer industry, the article concentrates on the use of computing technologies. It deals specifically with the Dutch giro system, the country's initial step toward automation in the early 1950s. Automation was achieved in 1965. Several organizational processes and the development of computer technology throughout the fifties contributed to the delay of automation and the ultimate choice and implementation of more than 20 IBM 1401 computer systems. The paper sheds light on the importance of studying how computer technology is used as well as how the technologies are developed     

Self-calibration techniques for a second-order multibit sigma-deltamodulator

Design techniques for self-calibration of the digital-to-analog converter DAC in a multibit sigma-delta modulator are described. When used in conjunction with dynamic element matching, self-calibration provides linearity performance suitable for digital audio applications. The dynamic element matching circuitry provides the mechanism of determining device mismatch for self-calibration. Practical circuit details and an effective calibration method are discussed. Test results from a l-μm CMOS test chip are presented. In this test system, a second-order loop with a 3-b quantizer achieves an 89-dB dynamic range and -91-dB harmonic distortion after calibration. In addition, a new method of detecting the presence of tones is described, using the entropy of the spectrum of the decimation filter output     

Electrochemical characterization of electrodeposited chromium and nickel-chromium layers on a steel substrate

Chromium was deposited on steel specimens and on electroplated steel specimens covered with a Watts nickel layer. The influence of the substrate and of the crack pattern of the electrodeposited chromium layer on the passivation and the reactivation behaviour has been studied by means of potentiodynamic polarization curve measurements and cyclic voltammetry. In the results of the above mentioned electrochemical measurements a strong influence of the substrate was found for a cracked chromium layer deposited on the steel specimen and for a cracked chromium layer deposited on a 30 m Watts nickel layer. No influence of the substrate was found in the case of a crack-free chromium layer deposited on the steel substrate or on a Watts nickel layer. It is thus possible to determine whether the chromium layer is cracked or crack free by recording a polarization curve or a cyclic voltammogram for a chromium-plated system. A mechanism is proposed for the passivation and repassivation of cracked chromium layers electrodeposited on a steel substrate or on a Watts nickel layer.     

The thermoelectric power in Bi2O3

The thermo electric power, ΔE/ΔT, of the cell $$\begin{gathered} O_2 + N_{2, } Pt/Bi_2 O_3 (\delta phase)/Pt, O_2 + N_2 \hfill \\ (T + \Delta T) (T) \hfill \\ \end{gathered}$$ has been measured as a function of oxygen pressure (10^?4 atm ? p(O₂) ? 1 atm) in the temperature range 650–800° C. The experimental result can be described by: $$[ \in ({\rm O}_2 /{\rm O}^{2 - } ) - \in (e, Pt)] = [45.6 \pm 5.6 log p(O_2 ) - 261](\mu VK^{ - 1} )$$ within experimental error, where ε(O₂/O²), the Seebeck coefficient ofδ-Bi₂O₃, stands for \(\mathop {\lim }\limits_{\Delta T \to 0} \Delta E/\Delta T\) The change of ΔE/ΔT with oxygen pressure corresponds to the change of the partial molar entropy of O₂. The heat of transport of O^2? ions is calculated to be 0.13 eV ± 0.01 whereas the activation enthalpy for ionic conduction is 0.30 eV. From this discrepancy it is concluded that the free ion model of Rice and Roth cannot be applied, while the extended lattice gas model of Girvin might explain the results when strong polaron coupling is assumed.     

Comparing the Performance of Organic Solvent Nanofiltration Membranes in Non-Polar Solvents

Organic solvent nanofiltration (OSN) is gradually expanding from academic research to industrial implementation. The need for membranes with low and sharp molecular weight cutoffs that are able to operate under aggressive OSN conditions is increasing. However, the lack of comparable and uniform performance data frustrates the screening and membrane selection for processes. Here, a collaboration is presented between several academic and industrial partners analyzing the separation performance of 10 different membranes using three model process mixtures. Membrane materials range from classic polymeric and thin film composites (TFCs) to hybrid ceramic types. The model solutions were chosen to mimic cases relevant to today's industrial use: relatively low molar mass solutes (330–550 Da) in n-heptane, toluene, and anisole.     

Yearly stepwise increments of the growth hormone dose results in a better growth response after four years in girls with Turner syndrome. Dutch Working Group on Growth Hormone

To optimize the growth promoting effect of growth hormone (GH), 65 previously untreated girls with Turner syndrome (TS), chronological age (CA) 2-11 yr, were randomized into 3 dosage regimen groups: A, B, and C, with a daily recombinant-human GH dose during 4 study years of 4-4-4-4, 4-6-6-6, and 4-6-8-8 IU/m2 b.s. The first GH dosage increase in groups B and C resulted in a significantly higher mean height velocity (HV) compared with constant dose group A. During the third year, when the dose was raised again only in group C, mean HV was significantly higher in groups B and C than in group A, and in group C compared with group B. In year 4 only group C mean HV remained significantly higher than group A. The pattern of change in HSDSCA (Dutch-Swedish-Danish Turner references) was identical; however, in year 4 mean delta HSDSCA in group B also remained significantly higher than group A. After 4 yr GH treatment, the following was determined. 1) The mean delta HSDSCA was significantly higher for groups B and C compared with group A, but not significantly different between groups B and C. 2) Although significantly higher compared with estimated values for untreated Dutch girls with TS, bone maturation of the GH treated girls was not significantly different between groups. 3) It was positively related with the degree of bone age (BA) retardation at start of study and negatively with baseline CA. 4) Both the modified Index of Potential Height (mIPHRUS) and a recently developed Turner-specific final height (FH) prediction method (PTSRUS), based on regression coefficients for H, CA, and bone age, showed significant increases in mean FH prediction, without significant differences between groups. PTSRUS values were markedly higher than the mIPHRUS values. Dose dependency could be shown for the area under the curve (AUC) for GH, but delta HSDSCA was not linearly related with AUC. Baseline GH binding protein (BP) levels were in 84% of the cases within the normal age range; the decrease in mean levels after 6 months GH was not significant. Mean insulin-like growth factor I (IGF-I) and IGFBP-3 plasma levels increased significantly, without significant differences between groups. delta HSDSCA during GH was dependent on IGF-I plasma levels at baseline and during the study period, beta-0.002 and beta-0.0004. Thus, a stepwise GH-dosing approach reduced the "waning" effect of the growth response after 4 yr treatment without undue bone maturation. FH prediction was not significantly different between treatment groups. Irrespective of the GH dose used, initiation of GH treatment at a younger age was beneficial after 4 yr GH when expressed as actual cm gained or as gain in FH prediction, but was not statistically significant when expressed as delta HSDSCA over the study period.     

Information and communication technologies in the life of university freshmen: An analysis of change

The passage from secondary school to university puts students in an environment with different expectations. Not only the expectations towards learning might change, but also towards ICT competences and computer use. The purpose of this article is to find out whether freshmen, after 6 months at the university, changed their self-perception of ICT competences and computer use in comparison with their behaviour at secondary school, and what factors can explain the self-perception of ICT competences and computer use in secondary school, in the university and their possible change. Based on a panel research among 714 freshmen of a large university, this article answers the following questions: (1) What is the self-perception of ICT competences among freshmen and is there a change in this self-perception 6 months after entering the university? (2) How often and for what purpose do freshmen use a computer and is there a change in the frequency of the use of a computer? (3) What factors might influence this attitude, behaviour, and possible change? In function of the basic components of Unified Theory of Acceptance and Use of Technology (Venkatesh, Morris, Davis, & Davis, 2003) hypotheses was developed and tested to answer these questions. Students who consider the computer to be a useful instrument, have control over the computer, possess a certain level of Internet competence, and are at ease with computers are more likely to have the skills needed to maintain a computer, to develop a web site, and to use basic ICT skills. The predictors have little influence on Internet usage. The same predictors contribute modestly to the explanation of the different frequencies of computer use, and a few of the predictors explain parts of change in ICT skills and frequency of computer use.     

Investigation of the chromate conversion coating on Alclad 2024 aluminium alloy: effect of the pH of the chromate bath

The parameters of the chromate bath, like temperature, pH, and fluoride content, strongly affect the morphology and chemical composition of the chromate conversion coating and as a consequence have a large influence on its corrosion performance. In this paper, electrochemical impedance spectroscopy (EIS) was used in combination with other techniques to investigate the role played by the pH of the chromate bath on the properties of the chromate film formed on Alclad 2024 aluminium alloy. Scanning electron microscopy (SEM), atomic force microscopy (AFM) and spectroscopic ellipsometry (SE) have shown the formation of a thicker and less dense chromate layer when the pH of the chromate bath is changed from 2.4 to 1.2. The analysis of the EIS spectra have highlighted that this change in pH leads to the formation of more protective and more resistant chromate corrosion products (CCP) inside the defects of the chromate film. When a thin, dense and protective layer of CCP is formed in the defects, the corrosion behaviour of the chromate conversion coating improves for two main reason: (a) further attack of the defects is avoided or delayed; (b) the change in volume caused by the formation of the CCP is limited resulting in a low level of stress in the film, which as a consequence is not detached from the aluminium substrate.     

Switching and PI control of walking motions of planar biped walkers

A companion paper has addressed the problem of designing controllers that induce exponentially stable, periodic walking motions at a fixed walking rate for a planar, biped robot with one degree of underactuation. This note provides two additional control features: 1) the ability to compose such controllers to obtain walking at several discrete walking rates with guaranteed stability during the transitions; and 2) the ability to regulate the average walking rate to a continuum of values.