Continuous precipitation of calcium sulfate dihydrate from waste sulfuric acid and lime

Precipitation of calcium sulfate dihydrate, gypsum, from (i) a pure sulfuric acid/lime suspension and (ii) a waste sulfuric acid/lime suspension in a continuous pilot plant in the temperature range from 40 °C to 80 °C was studied. It was observed that in the case of waste sulfuric acid with a high content of Mg²⁺ and Fe²⁺ ions, several hours after the beginning of the precipitation, partial dissolution of the product and modification of the crystals from needle‐ and plate‐like to agglomerated structures occurred. It is suggested that the secondary changes occur due to the increased concentration of Mg²⁺ and Fe²⁺ ions in the reactor. Below 60 °C, and above 70 °C plate‐like and needle‐like single crystals respectively were formed. The mean size (d₅₀) of the crystals was found to increase with increasing temperature and decrease with the initial concentration of lime. Gypsum produced between 70 °C and 80 °C is suitable for further processing for construction plaster. In a precipitation process with pure sulfuric acid only single perfect needle‐like crystals occurred. Copyright © 2005 Society of Chemical Industry     

Fast Recognition of Fibonacci Cubes

Fibonacci cubes are induced subgraphs of hypercubes based on Fibonacci strings. They were introduced to represent interconnection networks as an alternative to the hypercube networks. We derive a characterization of Fibonacci cubes founded on the concept of resonance graphs. The characterization is the basis for an algorithm which recognizes these graphs in O(mlog n) time. A. Vesel supported by the Ministry of Science of Slovenia under the grant 0101-P-297.     

Squash leaf glandular trichome volatiles: Identification and influence on behavior of female pickleworm moth [Diaphania nitidalis (Stoll.)] (Lepidoptera: Pyralidae)

Fourteen volatile compounds occurring in leaf trichomes of yellow squash (Cucurbita pepo L. cv. Early Prolific Straightneck) were identified. These compounds accounted for 83.5% of the volatile matrix. Ubiquitous constituents of the epidermis (myristic, palmitic, and stearic acids,n-tricosane, andn-pentacosane) accounted for 73.7%; these compounds were not bioassayed. The volatileso-,m-, andp-xylene, toluene, 2-heptanone, (R)-(+)- and (S)-(–)-limonene, and germacrene D were tested for their influence on attraction and oviposition by the pickleworm moth (Diaphania nitidalis Stoll.). No single compound, except germacrene D, was attractive. (R)-(+)-Limonene and 2-heptanone were weakly repellent. Mixtures of the highly volatile fractions were as attractive as volatiles emanating from whole, intact leaves. Oviposition levels on treated artificial sites corresponded with levels of visitation. Oviposition was significantly stimulated by whole-leaf volatiles, and (S)-(–)-limonene caused a slight but significant reduction.Mention of a trade name or proprietary product does not constitute a warranty or guarantee by the U.S. Department of Agriculture, nor does it imply exclusion of other products that may also be suitable.     

Raman spectroscopic analysis of thecis/trans isomer composition of edible vegetable oils

A new method is presented for determining thecis/trans isomer content of edible vegetable oils. The intensities of Raman lines near 1656 and 1670 cm⁻¹ are associated with thecis andtrans configuration, respectively. A precision of ca. 1% can be obtained in thecis/trans isomer analysis of binary mixtures of methyl esters and triglycerides of monoenes and dienes and of hydrogenated vegetable oils. The spectroscopic data also provide the iodine value of vegetable oils or isolated fractions with precision for a single determination of ca. 1%. Presented at the AOCS meeting, Houston, May 1971. W. Market. Nutr. Res. Div., ARS, USDA.     

A variable gap penalty function and feature weights for protein 3-D structure comparisons

We have developed a variable gap penalty function for use inthe comparison program COMPARER which aligns protein sequenceson the basis of their 3-D structures. For deletions and insertions,components are a function of structural features of individualamino acid residues (e.g. secondary structure and accessibility).We have also obtained relative weights for different featuresused in the comparison by examining the equivalent residuesin weight matrices and in alignments for pairs of 3-D structureswhere the equivalences are relatively unambiguous. We have usedthe new parameters and the varible gap penalty function in COMPARERto align protein structures in the Brookhaven Data Bank. Thevariable gap penalty function is useful especially in avoidinggaps in secondary structure elements and the new feature weightsgive improved alignments. The alignments for both azurins andplastocyanins and N- and C-terminal lobes for aspartic proteinasesare discussed     

Using Discriminative Dimensionality Reduction to Visualize Classifiers

Neural Processing Letters - Albeit automated classifiers offer a standard tool in many application areas, there exists hardly a generic possibility to directly inspect their behavior, which goes...     

Workflows for Heliophysics

In this paper we describe how we have introduced workflows into the working practices of a community for whom the concept of workflows is very new, namely the heliophysics community. Heliophysics is a branch of astrophysics which studies the Sun and the interactions between the Sun and the planets, by tracking solar events as they travel throughout the Solar system. Heliophysics produces two major challenges for workflow technology. Firstly it is a systems science where research is currently developed by many different communities who need reliable data models and metadata to be able to work together. Thus it has major challenges in the semantics of workflows. Secondly, the problem of time is critical in heliophysics; the workflows must take account of the propagation of events outwards from the sun. They have to address the four dimensional nature of space and time in terms of the indexing of data. We discuss how we have built an environment for Heliophysics workflows building on and extending the Taverna workflow system and utilising the myExperiment site for sharing workflows. We also describe how we have integrated the workflows into the existing practices of the communities involved in Heliophysics by developing a web portal which can hide the technical details from the users, who can concentrate on the data from their scientific point of view rather than on the methods used to integrate and process the data. This work has been developed in the EU Framework 7 project HELIO, and is being disseminated to the worldwide Heliophysics community, since Heliophysics requires integration of effort on a global scale.