Diurnal thermal cycling effects on microwave signatures of thin seaice

To investigate effects of diurnal thermal cycles on C-band polarimetric backscatter and millimeter-wave emission from sea ice, the authors carried out a winter experiment at the outdoor geophysical research facility (GRF) in the cold regions research and engineering laboratory (CRREL), the ice sheet grew from open sea water to a thickness of 10 cm in 2.5 days, during which they took polarimetric backscatter data with a C-band scatterometer, interlaced with brightness temperature measurements at 90 GHz in conjunction with meteorological and sea ice characterizations. The initial ice growth in the late morning was slow due to high insolation. As the air temperature dropped during the night, the growth rate increased significantly. Air temperature changed drastically from about -12 to -36°C between day and night, the diurnal thermal cycle repeated itself the next day and the growth rate varied in the same manner. Ice temperature profiles clearly show the diurnal response in the ice sheet with a lag of 2.5 h behind the time of the maximum short-wave incident solar radiation. The diurnal cycles are also evident in the millimeter-wave brightness temperature data, measured sea ice backscatter revealed substantial diurnal variations up to 6 dB with repeatable cycles in synchronization with the temperature cycles and the brightness temperature modulations, the diurnal cycles in backscatter indicate that the dominant scattering mechanism related to thermodynamic processes in sea ice is reversible, a diurnal backscatter model based on sea ice electrodynamics and thermodynamics explains the observed diurnal signature. This work shows that diurnal effects are important for inversion algorithms to retrieve sea ice geophysical parameters from remote sensing data acquired with a satellite synthetic aperture radar (SAR) or scatterometer on Sun-synchronous orbits     

Satellite SAR Remote Sensing of Great Lakes Ice Cover,Part 2. Ice Classification and Mapping

During the 1997 winter season, shipborne polarimetric backscatter measurements of Great Lakes (freshwater) ice types using the Jet Propulsion Laboratory C-band scatterometer, together with surface-based ice physical characterization measurements and environmental parameters, were acquired concurrently with Earth Resource Satellite 2 (ERS-2) and RADARSAT Synthetic Aperture Radar (SAR) data. This polarimetric data set, composed of over 20 variations of different ice types measured at incident angles from 0° to 60° for all polarizations, was processed to radar cross-section to establish a library of signatures (look-up table) for different ice types. The library is used in the computer classification of calibrated satellite SAR data. Computer analysis of ERS-2 and RADARSAT ScanSAR images of Great Lakes ice cover using a supervised classification technique indicates that different ice types in the ice cover can be identified and mapped, and that wind speed and direction can have an influence on the classification of water as ice based on single frequency, single polarization data. Once satellite SAR data are classified into ice types, the ice map provides important and necessary input for environmental protection and management, ice control and ice breaking operations, and ice forecasting and modeling efforts.     

Airborne scatterometers: investigating ocean backscatter under low and high-wind conditions

Attempting to understand and predict weather on a local and global basis has challenged both the scientific and engineering communities. One key parameter in understanding the weather is the ocean surface wind vector because of its role in the energy exchange at the air-sea surface. scatterometers, radars that measure the reflectivity of a target offer a tool with which to remotely monitor these winds from tower-, aircraft-, and satellite-based platforms. This paper introduces three current airborne scatterometer systems, and presents data collected by these instruments under low-, moderate-, and high-wind conditions. The paper focuses on airborne scatterometers because of their ability to resolve submesoscale variations in wind fields. Discrepancies between existing theory and the observations are noted and the concerns in measuring low-wind speeds discussed. Finally, the application of using this technology for estimating the surface-wind vector during a hurricane is demonstrated     

Peer-to-peer bichromatic reverse nearest neighbours in mobile ad-hoc networks

The increasing use of mobile communications has raised many issues of decision support and resource allocation. A crucial problem is how to solve queries of Reverse Nearest Neighbour (RNN). An RNN query returns all objects that consider the query object as their nearest neighbour. Existing methods mostly rely on a centralised base station. However, mobile P2P systems offer many benefits, including self-organisation, fault-tolerance and load-balancing. In this study, we propose and evaluate 3 distinct P2P algorithms focusing on bichromatic RNN queries, in which mobile query peers and static objects of interest are of two different categories, based on a time-out mechanism and a boundary polygon around the mobile query peers. The Brute-Force Search Algorithm provides a naive approach to exploit shared information among peers whereas two other Boundary Search Algorithms filter a number of peers involved in query processing. The algorithms are evaluated in the MiXiM simulation framework with both real and synthetic datasets. The results show the practical feasibility of the P2P approach for solving bichromatic RNN queries for mobile networks.     

A pure peer-to-peer approach for kNN query processing in mobile ad hoc networks

Together with advanced positioning and mobile technologies, P2P query processing has attracted a growing interest number of location-aware applications such as answering kNN queries in mobile ad hoc networks. It not only overcomes drawbacks of centralized systems, for example single point of failure and bottleneck issues, but more importantly harnesses power of peers’ collaboration. In this research, we propose a pure mobile P2P query processing scheme which primarily focuses on the search and validation algorithm for kNN queries. The proposed scheme is designed for pure mobile P2P environments with the absence of the base station support. Compared with centralized and hybrid systems, our system can reduce energy consumption more than six times by making use of data sharing from peers in a reasonable mean latency of processing time for networks with high density of moving objects as can be seen in the simulation results.     

A fuzzy-based interleaved multi-hop authentication scheme in wireless sensor networks

In sensor networks, a compromised node can either generate fabricated reports with false votes or inject false votes into real reports, which causes severe damage such as false alarms, energy drain and information loss. An interleaved hop-by-hop authentication (IHA) scheme addresses the former attack by detecting and filtering false reports in a deterministic and hop-by-hop fashion. Unfortunately, in IHA, all en-route nodes must join to verify reports while only a few are necessary to the authentication procedure. In this paper, we propose a fuzzy-based interleaved multi-hop authentication scheme based on IHA. In our scheme, the fuzzy logic system only selects some nodes for verification based on the network characteristics. Moreover, we apply a voting method and a hash-based key assignment mechanism to improve network security. Through performance evaluation, the proposed scheme is found to save up to 13% of the energy consumption and to provide more network protection compared to IHA.     

Ozonation of N-Nitrosamines in the Reverse Osmosis Concentrate from Water Recycling Applications

This study aims to evaluate the performance of ozone treatment for removing N-nitrosamines from reverse osmosis (RO) concentrate in water recycling applications. In the absence of any N-nitrosamine precursors, the destruction efficiency of N-nitrosamines was dependent on their molecular weight or the length of the alkyl chain in their molecular structure. Experiments conducted with RO concentrate showed that ozonation could lead to the formation of N-nitrosodimethylamine (NDMA) and N-nitrosodiethylamine (NDEA), resulting in an increase in concentrations of these N-nitrosamines. Nevertheless, ozonation was effective for destruction of N-nitrosamines with molecular weight greater than that of NDEA (102 g/mol).     

Influence of organic and colloidal fouling on the removal of sulphamethoxazole by nanofiltration membranes.

This study investigated the effects of organic and colloidal fouling on the removal of a representative micropollutant sulphamethoxazole by two commercially available NF membranes. Alginate, bovine serum albumin and colloidal silica were selected as model foulants to simulate hydrophilic and hydrophobic organic fractions, and colloidal matter that are often found in treated effluent and surface water. Membrane fouling was related to the membrane and foulant characteristics and subsequently the separation behaviour of the micropollutant sulphamethoxazole under different solution pH. On the basis of these results, it was confirmed that membrane fouling is strongly dependent on both the foulant and membrane characteristics. The complex relationship among retention mechanisms, fouling mechanisms and the effects of fouling on retention was systematically delineated. Of the three model foulants selected for this study, colloidal fouling resulted in the most significant reduction in retention of sulphamethoxazole as well as inorganic salts, while flux decline as a result of colloidal fouling was quite moderate. Reduction in retention caused by fouling was attributed to a phenomenon known as cake-enhance concentration polarisation, which was a predominant mechanism of colloidal fouling. In addition, the reported results suggested that the effect of fouling on retention is also membrane pore size dependent.     

Mechanisms underlying the effects of membrane fouling on the nanofiltration of trace organic contaminants

The influence of membrane fouling on the retention of four trace organic contaminants - namely sulfamethoxazole, ibuprofen, carbamazepine, and triclosan - by nanofiltration membranes was investigated in this study. Humic acid, alginate, bovine serum albumin, and silica colloids were selected as model foulants to simulate various organic fractions and colloidal matter that are found in secondary treated effluent and surface water. The effects of membrane fouling on the separation process was delineated by comparing retention values of clean and fouled membranes and relate them to the membrane properties (under both clean and fouled conditions) as well as physicochemical characteristics of the trace organic contaminants. Membrane fouling was dependent on the physicochemical properties of the model foulants. Initial foulant-membrane interaction could probably be a major factor governing the process of membrane fouling particularly by the organic foulants. Such membrane-foulant interaction was also a dominating factor governing the effects of membrane fouling on the membrane separation efficacy. In good agreement with our previous study (Nghiem and Hawkes, 2007 [1]), the effects of fouling on retention were found to be membrane pore size dependent. In addition, results reported here suggest that these effects could also be foulant dependent. It was probable that the influence of membrane fouling on trace organic retention could be governed by four distinctive mechanisms: modification of the membrane charge surface, pore blocking, cake enhanced concentration polarisation, and modification of the membrane hydrophobicity. The presence of the fouling layer could affect the retention behavior of charged solutes by altering the membrane surface charge density. While the effect of surface charge modification was clear for inorganic salts, it was less obvious for the negatively charged pharmaceutical species (sulfamethoxazole and ibuprofen) examined in this investigation, possibly due to the interference of the pore blocking mechanism. Evidence of the cake enhanced concentration polarisation effect was quite clear, particularly under colloidal fouling conditions. In addition, organic fouling could also interfere with the solute-membrane interaction, and therefore, exerted considerable influence on the separation process of the hydrophobic trace organic contaminant triclosan.