Green Measurements for Software Product Based on Sustainability Dimensions

Software is a central component in the modern world and vastly affects the environment’s sustainability. The demand for energy and resource requirements is rising when producing hardware and software units. Literature study reveals that many studies focused on green hardware; however, limited efforts were made in the greenness of software products. Green software products are necessary to solve the issues and problems related to the long-term use of software, especially from a sustainability perspective. Without a proper mechanism for measuring the greenness of a particular software product executed in a specific environment, the mentioned benefits will not be attained. Currently, there are not enough works to address this problem, and the green status of software products is uncertain and unsure. This paper aims to identify the green measurements based on sustainable dimensions in a software product. The second objective is to reveal the relationships between the elements and measurements through empirical study. The study is conducted in two phases. The first phase is the theoretical phase, where the main components, measurements and practices that influence the sustainability of a software product are identified. The second phase is the empirical study that involved 103 respondents in Malaysia investigating current practices of green software in the industrial environment and further identifying the main sustainability dimensions and measurements and their impact on achieving green software products. This study has revealed seven green measurements of software product: Productivity, Usability, Cost Reduction, Employee Support, Energy Efficiency, Resource Efficiency and Tool Support. The relationships are statistically significant, with a significance level of less than 0.01 (p = 0.000). Thus, the hypothesised relationships were all accepted. The contributions of this study revolve around the research perspectives of the measurements to attain a green software product.     

An exploration of corrosion inhibition of mild steel in sulphuric acid solution through experimental study and Monte Carlo simulations

Abstract

4-[4-(1H-imidazol-1-yl)methyl)-1H-1,2,3-triazol-1-yl]methylbenzophenone (ITBP) and 4[4-(1H-1,2,4-triazol-1-yl)methyl)-1H-1,2,3-triazol-1-yl]methylbenzophenone (TTBP) are synthesized as new heterocyclic compounds of the triazole derivative family and tested successfully as potential inhibitors for MS in 1?M H₂SO₄ corrosive medium by using gravimetric analysis, electrochemical impedance spectroscopy, potentiodynamic polarization, and energy dispersive X-ray spectroscopy (EDX). Polarization curves show that the tested inhibitors are mixed-type inhibitors. Scanning electron microscopy (SEM) affirmed the existence of an adsorbed film on the steel surface. Monte Carlo simulations were in excellent agreement with the experimental tests.

Abbreviation: PDP: Potentiodynamic Polarization; EIS: Electrochemical impedance spectroscopy; DFT: Density functional theory; MC: Monte Carlo     

新疆东天山灵北地区康南岩体岩石学#br# 特征及其构造意义

研究区位于新疆东天山觉罗塔格造山带吐哈盆地以南百灵山以北，多年来对于研究区古生代构造背景的认识受前人热议，存在争议。通过对研究区新发现基性岩体的岩石、地球化学特征与构造背景进行探讨，以期为大区域构造背景的研究提供一定的数据支持。主量元素研究表明，康南岩体具有高Mg、Fe，低Al的特征，说明研究区基性侵入岩为碱性岩石系列。微量元素测试结果表明具有同源演化的特征，Rb、Hf元素亏损较为严重。K、Ba、P、Sm富集明显，Tb、Nb、Ti表现为弱异常，在稀土元素球粒陨石标准化配分模式图中Eu的负异常不明显，表现为弱的正异常， Yb+Nb-Rb构造环境判别图解中样品落在“后碰撞”环境内，以上特征说明具有岛弧花岗岩的基本特征。岩性为深灰绿色弱蚀变细粒橄榄辉绿岩。     

Al2O3/Yttria‐Stabilized Zirconia Hollow‐Fiber Membrane Incorporated with Iron Oxide for Pb(II) Removal

Removal by absorptive ceramic membranes can simultaneously absorb and separate metal ions from water. Alumina/yttria‐stabilized zirconia (Al₂O₃/YSZ) hollow‐fiber membranes, fabricated using phase inversion and sintering process, were deposited with iron oxide by an in‐situ hydrothermal process. The results showed that α‐Fe₂O₃ was produced and incorporated across the membranes. A reduction in flux was recorded with the deposition of α‐Fe₂O_3. However, it improved the adsorption capacity for heavy metal adsorption. The adsorption‐separation test demonstrated that the optimized membrane is able to completely remove Pb(II) ions after two hours.     

Transesterification of Palm-based Methyl Palmitate into Esteramine Catalyzed by Calcium Oxide Catalyst

The technology for transesterification reactions between methyl esters and alcohols is well established by using classical homogeneous alkaline catalysts, which provide high conversion of methyl esters to specialty or nonindigenous esters. However, in certain products where the purity of the esters is of concern, the removal of homogeneous catalysts after the completion of the reaction is a challenge in terms of production cost and water footprint. Therefore, a study to investigate the potential of heterogeneous catalysts was conducted on reactions between methyl palmitate and triethanolamine. The degree of basicity and active surface area of calcium oxide (CaO), zinc oxide (ZnO), and magnesium oxide (MgO) were first characterized by using temperature-programmed desorption (TPD-CO₂) and Brunauere–Emmett–Teller (BET), respectively. Among the metal oxides investigated, the CaO catalyst showed the best catalytic activity toward the transesterification process as it gave the highest conversion of methyl palmitate and yielded fatty esteramine compositions similar to the conventional homogeneous catalyst. The optimum transesterification condition by using the CaO catalyst utilized a lower vacuum system of approximately 200 mbar, which could minimize a considerable amount of energy consumption. Furthermore, low CaO dosage of 0.1% was able to give a conversion of 94.5% methyl ester and formed esteramine at 170 °C for 2 h. Therefore, the production of esterquats from esteramine may become more economically feasible through the methyl ester route by using the CaO catalyst, which can be recycled three times.     

A cost comparison of balloon angioplasty and stenting versus endarterectomy for the treatment of carotid artery stenosis

PURPOSE: Percutaneous transluminal angioplasty with stenting (PTAS) of the carotid artery has been advocated as an alternative treatment for high-grade stenosis. Rationale for this approach includes less morbidity, shorter recovery, and lower cost when compared with carotid endarterectomy (CEA). METHODS: The clinical results and hospital charges of patients who underwent elective treatment for carotid stenosis were reviewed. During a concurrent 14-month period, 218 patients were admitted 229 times for 234 procedures for the treatment of 239 carotid bifurcation stenoses, 109 by PTAS and 130 by CEA. Hospital charges were reviewed for each hospitalization and were categorized according to radiology, operating room, cardiac catheterization laboratory, and all other hospital charges. RESULTS: The combined incidence of postprocedure strokes and deaths were: PTAS, eight strokes (7.7%) and one death (0.9%); CEA, two strokes (1.5%) and two deaths (1.5%). Total hospital charges per admission for the two groups were $30,140 for PTAS and $21,670 for CEA. The average postprocedure length of stay for PTAS was 2.9 days (median, 2 days) and for CEA was 3.1 days (median, 3 days). Cardiac catheterization laboratory charges for the PTAS group were $12,968, whereas the operating room charges for the CEA group were $4263. When hospitalizations that were extended by complications were excluded, the average total charges for the PTAS group (n = 84) dropped to $24,848 (mean length of stay, 1.9 days) and for the CEA group (n = 111) to $19,247 (mean length of stay, 2.6 days). CONCLUSIONS: After evaluating hospital charges, PTAS for the treatment of carotid stenosis cannot currently be justified on the basis of reduced costs alone. With future cost-containing measures, total hospital charges can be reduced in both groups.     

青铜峡灌区水土资源平衡分析的探讨

本文根据青铜峡灌区四水转化的特点和灌区规划的要求，提出灌区节水改造规划的水土资源平衡应进行水资源的3个平衡分析，即水资源供需平衡分析，引水、耗水与排水平衡分析，水资源耗水平衡分析.水资源的3个平衡分析的目标与内容不同，但科学基础与依据都是灌区的四水转化关系.     

Hormonal regulation of the estrogen receptor in primary cultures of hepatocytes from female rats

Estrogen treatment affects the hepatic synthesis and/or secretion of several proteins involved in clinically important pathological processes such as atherosclerosis, hypertension, and thrombosis. The endocrine regulation of the estrogen receptor (ER) concentration in primary cultures of rat hepatocytes was studied. Human growth hormone (hGH) and dexamethasone (DEX) in combination increased ER concentration 6-fold and ER mRNA levels 2.5-fold. These effects were not significantly different from those observed after treatment with the purely somatogenic bovine growth hormone (GH) in combination with DEX. Treatment with the lactogen ovine prolactin in the presence or absence of DEX did not significantly affect ER or ER mRNA concentrations. Triiodothyronine treatment at the most effective concentration (50 nM) increased ER and ER mRNA levels twofold. Medium supplementation with estradiol (0.1 nM) throughout the experiment did not affect the response to treatment with hGH and DEX. Treatment with high concentrations of ethinylestradiol in combination with hGH and DEX, however, increased the ER level twice as much as hGH and DEX without addition of estradiol or ethinylestradiol, whereas the ER mRNA concentration was the same in both the GH+DEX group and GH+ DEX+ (estradiol or ethinylestradiol) groups. These data indicate the importance of GH in combination with glucocorticoids for the maintenance of ER concentrations in the rat liver. Thyroid hormones may be of some, although minor importance, whereas the data suggest that prolactin is not directly involved in hepatic ER regulation.