Nanogrooved carbon microtubes for wet three‐dimensional printing of conductive composite structures

Recent advances in three‐dimensional (3D) printing have enabled the fabrication of interesting structures which are not achievable using traditional fabrication approaches. The 3D printing of carbon microtube composite inks allows fabrication of conductive structures for practical applications in soft robotics and tissue engineering. However, it is challenging to achieve 3D printed structures from solution‐based composite inks, which requires an additional process to solidify the ink. Here, we introduce a wet 3D printing technique which uses a coagulation bath to fabricate carbon microtube composite structures. We show that through a facile nanogrooving approach which introduces cavitation and channels on carbon microtubes, enhanced interfacial interactions with a chitosan polymer matrix are achieved. Consequently, the mechanical properties of the 3D printed composites improve when nanogrooved carbon microtubes are used, compared to untreated microtubes. We show that by carefully controlling the coagulation bath, extrusion pressure, printing distance and printed line distance, we can 3D print composite lattices which are composed of well‐defined and separated printed lines. The conductive composite 3D structures with highly customised design presented in this work provide a suitable platform for applications ranging from soft robotics to smart tissue engineering scaffolds. © 2019 Society of Chemical Industry     

Effect of specimen size and loading conditions on spalling of concrete

Different qualities of concrete have been fire tested using different geometries of the specimens as well as different load levels and load configurations. The main objective with the study was to examine a test methodology consisting of a full‐scale test and different small scale‐tests for determining the probability of spalling and the amount of spalling of fire exposed concrete structures. A reference specimen was defined as a one‐sided fire exposed slab with the dimensions 1800 × 1200 mm² giving an exposed area of 1500 × 1200 mm². A number of concrete qualities with different probabilities for spalling, were tested using the reference specimen. These tests showed that the reference specimens worked well giving the expected test results. Small specimens were manufactured in different shapes with the same concrete as the one used in the reference tests. These small specimens were tested either at the same time as the reference specimens in the large furnace or afterwards on a small‐scale furnace where the fire exposed surface was 450 × 360 mm². The test results clearly show the increased probability and the increased amount of spalling by using external compressive loading. The results also show that by using pre‐stress through bars or wires the load can be lost due to heating of the bars/wires which results in a decreased amount of spalling. The boundary of the specimen also affects the amount of spalling. The spalling around the edges was in all tests less than the spalling on the central parts of the exposed area. It could also be noted that the spalling did not pass completely through any of the specimens. The reason for this is probably that the water/vapour could migrate out from the unexposed surface of the specimen. Copyright © 2006 John Wiley & Sons, Ltd.     

Swoop: A Web Ontology Editing Browser

In this paper, we describe Swoop, a hypermedia inspired Ontology Browser and Editor based on OWL, the recently standardized Web-oriented ontology language. After discussing the design rationale and architecture of Swoop, we focus mainly on its features, using illustrative examples to highlight its use. We demonstrate that with its Web-metaphor, adherence to OWL recommendations and key unique features, such as Collaborative Annotation using Annotea, Swoop acts as a useful and efficient Web Ontology development tool. We conclude with a list of future plans for Swoop, that should further increase its overall appeal and accessibility.     

Study of the hinge thickness deviation for a 316L parallelogram flexure mechanism fabricated via selective laser melting

3D printing offers great potential for developing complex flexure mechanisms. Recently, thickness-correction factors (TCFs) were introduced to correct the thickness and stiffness deviations of powder-based metal 3D printed flexure hinges during design and analysis. However, the reasons for the different TCFs obtained in each study are not clear, resulting in a limited value of these TCFs for future design and fabrication. Herein, the influence of the porous layer of 3D printed flexure hinges on the hinge thickness is investigated. Samples of parallelogram flexure mechanisms (PFMs) were 3D printed using selective laser melting (SLM) and 316L stainless steel powder. A 3D manufacturing error analysis was completed for each PFM sample via 3D scanning, surface roughness measurement and morphological observation. The thickness of the porous layer of the flexure hinge was independent of the designed hinge thickness and remained close to the average powder particle diameter. The effective hinge thickness could be estimated by subtracting twice the value of the porous layer thickness from the designed value. Guidelines based on finite element analysis and stiffness experiments are proposed. The limitations of the presented method for evaluating the effective hinge thickness of flexure hinges 3D printed via SLM are also discussed.

     

Electrodeposition of smooth and adherent film of polypyrrole on lead electrode

Electropolymerization of pyrrole on lead substrate electrode was studied. Due to electrochemical activity of Pb in acidic media, this process is only possible at basic pHs. For this purpose, electropolymerization process was performed in an aqueous solution of Na₂SO₄ with pH 12. Potentiodynamic cycling shows the Pb oxidation at the first cycles. In subsequent cycles, polypyrrole film grows on the oxidized lead substrate. Of course, as the passive film is highly porous, a composite of polypyrrole/PbSO₄ is formed in the first layers. However, subsequent cycling leads to the formation of pure polypyrrole film. According to this structure and strong connection of the polymer film to the substrate surface via this composite layer, the polypyrrole film deposited on the lead surface has enhanced mechanical stability. AFM measurements showed peculiar smoothness of both composite and lateral polypyrrole films. This synthesis approach is of particular interest for the preparation of highly stable polymer films and fabrication of supercapacitors with a polymer/PbSO₄ conductive structure.     

A new view of fuzzy hypernear-rings

In this survey article, we first introduce the concept of quasi-coincidence of a fuzzy interval value with an interval valued fuzzy set. This concept is a generalized concept of quasi-coincidence of a fuzzy point within a fuzzy set. By using this new idea, we consider the interval valued (∈,∈∨q)-fuzzy sub-hypernear-rings (hyperideals) of a hypernear-ring, and hence, a generalization of a fuzzy sub-near-ring (ideal) is given. Some related properties of fuzzy hypernear-rings are described. Finally, we consider the concept of implication-based interval valued fuzzy sub-hypernear-rings (hyperideals) in a hypernear-ring, in particular, the implication operators in Lukasiewicz system of continuous-valued logic are discussed.     

Fatigue behaviour and modelling of talc‐filled and short glass fibre reinforced thermoplastics,including temperature and mean stress effects

Effects of temperature and mean stress on fatigue behaviour of talc‐filled polypropylene (PP‐T) and short glass fibre reinforced polypropylene (PP‐G), polyamide‐66 (PA66), and a blend of polyphenylene ether and polystyrene (PPE/PS) were investigated. Load‐controlled fatigue tests were conducted under positive stress ratios (R = 0.1 and 0.3) and at several temperatures (T = 23, 85 and 120 °C). Larson–Miller parameter was used and a shift factor of Arrhenius type was developed to correlate fatigue data at various temperatures. Effect of mean stress on fatigue life was significant for some of the studied materials; however, for the PPE/PS blend no effect of mean stress was observed. Modified Goodman and Walker mean stress equations were evaluated for their ability to correlate mean stress data. A general fatigue life prediction model was also used to account for the effects of mean stress, temperature, anisotropy and frequency.     

Selective toxicity of hydroxyl-rich carbon nanodots for cancer research

Nano Research - The toxicity of nanoparticles in a biological system is an integration of effects arising from surface functionality, particle size, ionic dissolution, etc. This complexity suggests...     

The comparison of incomplete sensitivities and Genetic algorithms applications in 3D radial turbomachinery blade optimization

In the present work, a centrifugal pump impeller’s blades shape was redesigned to reach a higher efficiency in turbine mode using two different optimization algorithms: one is a local method as incomplete sensitivities–gradient based optimization algorithm coupled by 3D Navier–Stokes flow solver, and another is a global method as Genetic algorithms and artificial neural network coupled by 3D Navier–Stokes flow solver. New impeller was manufactured and tested in the test rig. Comparison of the local optimization method results with the global optimization method results showed that the gradient based method has detected the global optimum point. Experimental results confirmed the numerical efficiency improvement in all measured points. This study illustrated that the developed gradient based optimization method is efficient for 3D radial turbomachinery blade optimization.