Shock consolidation of diamond powders

Fine and coarse diamond powders were shock-compacted at peak pressures of 77, 90, and 108 GPa. The densification and consolidation mechanisms of diamond powders under shock compression were investigated. The densification behaviour of the diamond powders depended strongly on the particle size of the starting materials. Fine diamond powders were densified primarily by plastic deformation, while coarse diamond powders were densified mainly by particle fracture. The relative densities of the compacted diamond samples increased with an increase in the initial particle size of the diamond and with shock pressure. The consolidation mechanism of the diamond powders under shock compression was closely related to the densification mechanism, and depended on the initial particle size of the diamond. At a shock pressure of 90 GPa, particle sizes of 2 to 4 m grade and 10 to 20 m grade were desirable as the starting material in order to produce well-bonded diamond compacts. Diamond compacts having microhardness values over 80 GPa were obtained from 2 to 4 m grade and 10 to 20 m grade diamond powders at a shock pressure of 90 G Pa, and their relative densities were 88.5% and 91.0%, respectively.     

Acrylic nonaqueous dispersion using butylated melamine-formaldehyde resin as dispersant

A series of acrylic nonaqueous dispersions were prepared by using various kinds of butylated melamine–formaldehyde (BMF) resins as dispersant. The functional group composition of BMF to form stable dispersion was butoxy group more than 13 mol/BMF 1 mol, and methylol group ranged from 1 to 2.5 mol/BMF 1 mol. It is concluded that the anchoring of BMF to acrylic copolymer was due to the formation of covalent bond between methylol group in BMF and hydroxy group in acrylic copolymer.     

Catalysis of gasification of coal-derived cokes and chars

Calcium is the most important in-situ catalyst for gasification of US coal chars in O₂, CO₂ and H₂O. It is a poor catalyst for gasification of chars by H₂. Potassium and sodium added to low-rank coals by ion exchange and high-rank coals by impregnation are excellent catalysts for char gasification in O₂, CO₂ and H₂O. Carbon monoxide inhibits catalysis of the CH₂O reaction by calcium, potassium and sodium; H₂ inhibits catalysis by calcium. Thus injection of synthesis gas into the gasifier will inhibit the CH₂O reaction. Iron is not an important catalyst for the gasification of chars in O₂, CO₂ and H₂O, because it is invariably in the oxidized state. Carbon monoxide disproportionates to deposit carbon from a dry synthesis gas mixture (3 vol H₂ + 1 vol CO) over potassium-, sodium- and iron-loaded lignite char and a raw bituminous coal char, high in pyrite, at 1123 K and 0.1 MPa pressure. The carbon is highly reactive, with the injection of 2.7 kPa H₂O to the synthesis gas resulting in net carbon gasification. The effect of traces of sulphur in the gas stream on catalysis of gasification or carbon-forming reactions by calcium, potassium, or sodium is not well understood at present. Traces of sulphur do, however, inhibit catalysis by iron.     

Allelopathic Effects of Volatile Monoterpenoids Produced by <Emphasis Type="Italic">Salvia leucophylla</Emphasis>: Inhibition of Cell Proliferation and DNA Synthesis in the Root Apical Meristem of <Emphasis Type="Italic">Brassica campestris</Emphasis> Seedlings

Salvia leucophylla, a shrub observed in coastal south California, produces several volatile monoterpenoids (camphor, 1,8-cineole, -pinene, -pinene, and camphene) that potentially act as allelochemicals. The effects of these were examined using Brassica campestris as the test plant. Camphor, 1,8-cineole, and -pinene inhibited germination of B. campestris seeds at high concentrations, whereas -pinene and camphene did not. Root growth was inhibited by all five monoterpenoids in a dose-dependent manner, but hypocotyl growth was largely unaffected. The monoterpenoids did not alter the sizes of matured cells in either hypocotyls or roots, indicating that cell expansion is relatively insensitive to these compounds. They did not decrease the mitotic index in the shoot apical region, but specifically lowered mitotic index in the root apical meristem. Moreover, morphological and biochemical analyses on the incorporation of 5-bromo-2-deoxyuridine into DNA demonstrated that the monoterpenoids inhibit both cell-nuclear and organelle DNA synthesis in the root apical meristem. These results suggest that the monoterpenoids produced by S. leucophylla could interfere with the growth of other plants in its vicinity through inhibition of cell proliferation in the root apical meristem.     

Effects of growth temperature on the fatty acid composition of the free-living nematodeCaenorhabditis elegans

The effects of growth temperature on the fatty acid compositions of the phosphatidylcholine (PC), phosphatidylethanolamine (PE), and total lipid (TL) fractions of the free-living nematodeCaenorhabditis elegans were investigated. A reduction in growth temperature from 25 to 15°C caused the proportions of eicosapentaenoic acid (20∶5n-3) to increase from 23.6 to 32.5% in the PC, from 7.4 to 10.8% in the PE, and from 12.9 to 19.9% in the TL fractions. Conversely, the levels of dihomo-γ-linolenic acid (20∶3n-6) and arachidonic acid (20∶4n-6) in these phospholipid fractions and the TL fraction both decreased with decreasing growth temperature. Analysis of the positional distribution of fatty acids in the PC fraction revealed that the change in the composition of C₂₀ polyunsaturated fatty acid was obvious in positionsn-2. Lowering the growth temperature induced an increase in the level of the diacyl subclass of PE from 58% at 25°C to 71% at 15°C, with a concomitant decrease in the levels of the alkylacyl and alkenylacyl subclass of PE ofC. elegans. These changes observed in the phospholipids ofC. elegans might be one mechanism for adaptation to low temperature. Lipids 31, 1173–1178 (1996).     

Evaluation of environmentally friendly lubricants for cold forging

The authors proposed double-layer-type environmentally friendly lubricants, which were composed of an undercoat, superior in adhering to a material, and an overcoat, superior in reducing the friction between the material and the die. The performance of these lubricants for cold forging was evaluated by the ring compression test, the combined forward rod-backward can extrusion-type friction test and the combined forward conical can-backward straight can extrusion-type friction test. The double-layer-type lubricants showed comparable friction characteristics and anti-pick-up properties to a conversion coating lubricant, when the film thickness and surface treatment before coating were improved. In a practical application by cold multistage forging, the double-layer-type lubricants showed a similar performance to a conversion coating lubricant.     

Diffusion Magnetic Resonance Imaging-Based Biomarkers for Neurodegenerative Diseases

There has been an increasing prevalence of neurodegenerative diseases with the rapid increase in aging societies worldwide. Biomarkers that can be used to detect pathological changes before the development of severe neuronal loss and consequently facilitate early intervention with disease-modifying therapeutic modalities are therefore urgently needed. Diffusion magnetic resonance imaging (MRI) is a promising tool that can be used to infer microstructural characteristics of the brain, such as microstructural integrity and complexity, as well as axonal density, order, and myelination, through the utilization of water molecules that are diffused within the tissue, with displacement at the micron scale. Diffusion tensor imaging is the most commonly used diffusion MRI technique to assess the pathophysiology of neurodegenerative diseases. However, diffusion tensor imaging has several limitations, and new technologies, including neurite orientation dispersion and density imaging, diffusion kurtosis imaging, and free-water imaging, have been recently developed as approaches to overcome these constraints. This review provides an overview of these technologies and their potential as biomarkers for the early diagnosis and disease progression of major neurodegenerative diseases.     

Evaluation of effects of windows installed with near-infrared rays retro-reflective film on thermal environment in outdoor spaces using CFD analysis coupled with radiant computation

Recently, windows with low-e double-glazing or heat-shading films often have been installed to the exterior surfaces of buildings to reduce the cooling load of the buildings. These windows specularly reflect solar radiation into pedestrian spaces. It has been pointed out that the increase in the incident solar radiation reflected at the windows degrades the thermal comfort levels of pedestrians. The installation of near-infrared rays retro-reflective film to window surfaces may both reduce the cooling load of the building and reduce the impacts on the thermal environment in outdoor spaces. Hence, it is expected that the installation of this film will counteract this problem and have positive effects. To assess the feasibility of installing retro-reflective materials to the exterior surfaces of the building walls and ground forming part of a city block, for improving the thermal environment in outdoor spaces, computational methods could serve as a powerful tool for analyzing the radiant environment in urban and building spaces. In this paper, a computational method is outlined for considering the directional reflections from the exterior surfaces of building walls and windows. The method is used to estimate the effects on the outdoor thermal comfort of pedestrians in the summer season.