A comparative study on structural,morphological and photocatalytic properties of anodically grown ZnO nanowires under varying parameters

Journal of Materials Science: Materials in Electronics - In this study, zinc oxide (ZnO) nanowires (NWs) were successfully produced on Zn plates through electrochemical anodization in potassium...     

Cellular neural network with trapezoidal activation function

This paper presents a cellular neural network (CNN) scheme employing a new non‐linear activation function, called trapezoidal activation function (TAF). The new CNN structure can classify linearly non‐separable data points and realize Boolean operations (including eXclusive OR) by using only a single‐layer CNN. In order to simplify the stability analysis, a feedback matrix W is defined as a function of the feedback template A and 2D equations are converted to 1D equations. The stability conditions of CNN with TAF are investigated and a sufficient condition for the existence of a unique equilibrium and global asymptotic stability is derived. By processing several examples of synthetic images, the analytically derived stability condition is also confirmed. Copyright © 2005 John Wiley & Sons, Ltd.     

Effect of high hydrostatic pressure on physicochemical and biochemical properties of milk

Interest in high hydrostatic pressure (HHP) applications on milk and dairy products has recently increased as HHP offers a new technology for food preservation to the food industry. Although HHP-induced microbial destruction, rennet or acid coagulation of milk and increase in cheese yield has been reported, the actual effect of HHP application on milk constituents still remains to be unexplained. Therefore, we have analyzed the effect of HHP on physicochemical and biochemical properties such as turbidity, pH and especially protein micelle surface hydrophobicity of milk proteins. To serve for this purpose, milk samples with different fat contents were pressurized from 110 to 440 MPa at 25 °C for 10 and 20 min. Turbidity decreased with pressure increase and there was a slight change in pH. In order to measure the extent of exposure of hydrophobic groups of proteins to HHP, the method described by Bonomi et al. [1], based on use of a fluorescent probe, was utilized. In the light of the results obtained, it can be concluded that HHP has an effect on non-covalent interactions and especially hydrophobic bonds in milk. As the pressure is increased from 110 to 440 MPa, the micelles possibly decompose into sub-micelles and the embedded hydrophobic areas inside these micelles re-position in such a way that they can readily interfere with the fluorescent marker, ANS. These results may lead to practical applications of HHP treatment in the dairy industry to produce microbiologically safe, minimally processed products with high nutritional and sensory quality and novel texture.     

Dynamical system parameter identification using deep recurrent cell networks

Neural Computing and Applications - In this paper, we investigate the parameter identification problem in dynamical systems through a deep learning approach. Focusing mainly on second-order, linear...     

hTERT-Driven Immortalization of RDEB Fibroblast and Keratinocyte Cell Lines Followed by Cre-Mediated Transgene Elimination

The recessive form of dystrophic epidermolysis bullosa (RDEB) is a crippling disease caused by impairments in the junctions of the dermis and the basement membrane of the epidermis. Using ectopic expression of hTERT/hTERT + BMI-1 in primary cells, we developed expansible cultures of RDEB fibroblasts and keratinocytes. We showed that they display the properties of their founders, including morphology, contraction ability and expression of the respective specific markers including reduced secretion of type VII collagen (C7). The immortalized keratinocytes retained normal stratification in 3D skin equivalents. The comparison of secreted protein patterns from immortalized RDEB and healthy keratinocytes revealed the differences in the contents of the extracellular matrix that were earlier observed specifically for RDEB. We demonstrated the possibility to reverse the genotype of immortalized cells to the state closer to the progenitors by the Cre-dependent hTERT switch off. Increased β-galactosidase activity and reduced proliferation of fibroblasts were shown after splitting out of transgenes. We anticipate our cell lines to be tractable models for studying RDEB from the level of single-cell changes to the evaluation of 3D skin equivalents. Our approach permits the creation of standardized and expandable models of RDEB that can be compared with the models based on primary cell cultures.     

Design of a Commercial Hybrid VTOL UAV System

For the last four decades Unmanned Air Vehicles (UAVs) have been extensively used for military operations that include tracking, surveillance, active engagement with weapons and airborne data acquisition. UAVs are also in demand commercially due to their advantages in comparison to manned vehicles. These advantages include lower manufacturing and operating costs, flexibility in configuration depending on customer request and not risking the pilot on demanding missions. Even though civilian UAVs currently constitute 3 % of the UAV market, it is estimated that their numbers will reach up to 10 % of the UAV market within the next 5 years. Most of the civilian UAV applications require UAVs that are capable of doing a wide range of different and complementary operations within a composite mission. These operations include taking off and landing from limited runway space, while traversing the operation region in considerable cruise speed for mobile tracking applications. This is in addition to being able traverse in low cruise speeds or being able to hover for stationary measurement and tracking. All of these complementary and but different operational capabilities point to a hybrid unmanned vehicle concept, namely the Vertical Take-Off and Landing (VTOL) UAVs. In addition, the desired UAV system needs to be cost-efficient while providing easy payload conversion for different civilian applications. In this paper, we review the preliminary design process of such a capable civilian UAV system, namely the TURAC VTOL UAV. TURAC UAV is aimed to have both vertical take-off and landing and Conventional Take-off and Landing (CTOL) capability. TURAC interchangeable payload pod and detachable wing (with potential different size variants) provides capability to perform different mission types, including long endurance and high cruise speed operations. In addition, the TURAC concept is to have two different variants. The TURAC A variant is an eco-friendly and low-noise fully electrical platform which includes 2 tilt electric motors in the front, and a fixed electric motor and ducted fan in the rear, where as the TURAC B variant is envisioned to use high energy density fuel cells for extended hovering time. In this paper, we provide the TURAC UAV’s iterative design and trade-off studies which also include detailed aerodynamic and structural configuration analysis. For the aerodynamic analysis, an in-house software including graphical user interface has been developed to calculate the aerodynamic forces and moments by using the Vortex Lattice Method (VLM). Computational Fluid Dynamics (CFD) studies are performed to determine the aerodynamic effects for various configurations For structural analysis, a Finite Element Model (FEM) of the TURAC has been prepared and its modal analysis is carried out. Maximum displacements and maximal principal stresses are calculated and used for streamlining a weight efficient fuselage design. Prototypes have been built to show success of the design at both hover and forward flight regime. In this paper, we also provide the flight management and autopilot architecture of the TURAC. The testing of the controller performance has been initiated with the prototype of TURAC. Current work focuses on the building of the full fight test prototype of the TURAC UAV and aerodynamic modeling of the transition flight.     

Large-scale SRAM-based IP lookup architectures using compact trie search structures

SRAM-based pipelined architectures for high-speed IP lookup using Field Programmable Gate Arrays (FPGAs) has recently attracted a great deal of attention from researchers. Due to the limited amount of on-chip memory and the number of I/O pins of FPGAs, compact data structures providing high memory efficiency are in great demand.     

Unveiling the presence of mixed oxidation states of Europium in Li7+δEuxLa3−δZr2−δO12−δ garnet and its impact on the Li-ion conductivity

Recently, lanthanides have been employed by researchers to examine their impact on the structure and properties of Li₇La₃Zr₂O₁₂ (LLZO) garnets. In this regard, we developed Europium oxide (Eu₂O₃) doped LLZO (Li_7+δEu_xLa_3−δZr_2−δO_12−δ) solid electrolyte which demonstrates a cubic phase with the symmetry of Iad (No.230) at room temperature. In this investigation, different concentrations of Eu ranging from 0.1 to 0.6 atoms per formula unit (pfu) were doped into Li₇La₃Zr₂O₁₂ to evaluate the impact of Eu on the stability of the cubic phase and thereby the ionic conductivity. The results unveiled that upon doping Eu³⁺ ions, the Eu²⁺ state is also formed and is then self-doped into the structure in which Rietveld refinement coupled with XPS, EPR, and solid-state NMR suggests that Eu³⁺ ions most probably partially occupy Zr⁴⁺ (16a) site, the Eu²⁺ ions occupy La³⁺ (24d) site, and the Li⁺ ions occupy two different sites (24d and 96h). It was further found that such a site preference induces distortion at LaO₈ polyhedrons opening up the neck for Li-ions diffusion, thereby enhancing the ionic conductivity. Moreover, it was revealed that Li-ions probably hop from 96h to 24d and then to 96h site to generate the Li-ion movement. Overall, by introducing Eu ions into the LLZO structure, an enhanced bulk ionic conductivity of 0.30 × 10⁻³ S/cm at 298 K with a minimum electronic conductivity of 2.547 × 10⁻⁹ S/cm at 298 K was achieved.     

SONIC: streaming overlapping community detection

A community within a graph can be broadly defined as a set of vertices that exhibit high cohesiveness (relatively high number of edges within the set) and low conductance (relatively low number of edges leaving the set). Community detection is a fundamental graph processing analytic that can be applied to several application domains, including social networks. In this context, communities are often overlapping, as a person can be involved in more than one community (e.g., friends, and family); and evolving, since the structure of the network changes. We address the problem of streaming overlapping community detection, where the goal is to maintain communities in the presence of streaming updates. This way, the communities can be updated more efficiently. To this end, we introduce SONIC—a find-and-merge type of community detection algorithm that can efficiently handle streaming updates. SONIC first detects when graph updates yield significant community changes. Upon the detection, it updates the communities via an incremental merge procedure. The SONIC algorithm incorporates two additional techniques to speed-up the incremental merge; min-hashing and inverted indexes. Results show that SONIC can provide high quality overlapping communities, while handling streaming updates several orders of magnitude faster than the alternatives performing from-scratch computation.     

Approximate probabilistic optimization using exact-capacity-approximate-response-distribution (ECARD)

Probabilistic structural design deals with uncertainties in response (e.g. stresses) and capacity (e.g. failure stresses). The calculation of the structural response is typically expensive (e.g., finite element simulations), while the capacity is usually available from tests. Furthermore, the random variables that influence response and capacity are often disjoint. In previous work we have shown that this disjoint property can be used to reduce the cost of obtaining the probability of failure via Monte Carlo simulations. In this paper we propose to use this property for an approximate probabilistic optimization based on exact capacity and approximate response distributions (ECARD). In Approximate Probabilistic Optimization Using ECARD, the change in response distribution is approximated as the structure is re-designed while the capacity distribution is kept exact, thus significantly reducing the number of expensive response simulations. ECARD may be viewed as an extension of SORA (Sequential Optimization and Reliability Assessment), which proceeds with deterministic optimization iterations. In contrast, ECARD has probabilistic optimization iterations, but in each iteration, the response distribution is approximated so as not to require additional response calculations. The use of inexpensive probabilistic optimization allows easy incorporation of system reliability constraints and optimal allocation of risk between failure modes. The method is demonstrated using a beam problem and a ten-bar truss problem. The former allocates risk between two different failure modes, while the latter allocates risk between members. It is shown that ECARD provides most of the improvement from risk re-allocation that can be obtained from full probabilistic optimization.