A comparative study on structural,morphological and photocatalytic properties of anodically grown ZnO nanowires under varying parameters

Journal of Materials Science: Materials in Electronics - In this study, zinc oxide (ZnO) nanowires (NWs) were successfully produced on Zn plates through electrochemical anodization in potassium...     

Investigation of current‐voltage characteristics and current conduction mechanisms in composites of polyvinyl alcohol and bismuth oxide

Temperature dependent current‐voltage (I–V) measurements of Au/Polyvinyl Alcohol + Bi₂O₃/n‐Si structure were conducted between 100 and 350 K for investigating the temperature dependence of I–V characteristics and current conduction mechanisms in the structure. Series resistance of the structure is calculated using Ohm's law and Cheungs' method. Ideality factor (n) and zero‐bias barrier height (Φ_Bo) were obtained considering thermionic emission theory. From 100 to 350 K, n changed from 32.1 to 3.54, and Φ_Bo changed from 0.27 to 0.99 eV. Obtained temperature dependent values of n and Φ_Bo suggested that thermionic emission is not the dominant current conduction mechanism. Therefore, Ln(I)–Ln(V) curves of the studied structure were plotted for investigating current conduction mechanisms in the structure and current flow is explained considering space charge limited current. Moreover, density of interface states (D_it) in the structure were calculated and its temperature dependence was investigated such that D_it values are reduced to the order of ～10¹³ eV^?1 cm^?2 from ～10¹⁴ eV^?1 cm^?2 with increasing temperature. POLYM. ENG. SCI., 54:1811–1816, 2014. © 2013 Society of Plastics Engineers     

The effects of Cu and Al on dry sliding wear properties of eutectic Sn-9Zn lead-free solder alloy

The present study investigates the influence of Cu and Al on microstructure and wear behavior of a eutectic Sn-9Zn solder alloy. The Sn-9Zn–X alloy was produced by adding various amounts of Cu and Al through investment casting method. The produced Sn-9Zn–X alloys were characterized by a scanning electron microscope, X-ray diffraction, and hardness measurements. In wear tests at 1 ms^?1 sliding speed, 10 N load and 5 different sliding distances (400–2000 m) were used. The results show that as the amount of Cu and Al increased within Sn-9Zn alloy, the hardness of the alloy increased as well. Depending on the increase in hardness of the alloys produced by investment casting, it was observed that weight loss decreased during wear tests. Furthermore, the same proportion of added Al alloys’ hardness and weight loss were observed to be higher than the added Cu alloys. Furthermore, the Cu-added alloy exhibited higher hardness and lower weight loss than the Al-added alloy did.     

Mechanochemical processing and microstructural characterization of pure Fe2B nanocrystals

The results of current investigation demonstrate that mechanochemical processing can be used to synthesize high purity Fe₂B nanocrystals by selecting well-optimized milling conditions, reaction paths and proper starting materials. Microstructure, phase analyses, specific surface area, and magnetic properties of the synthesized nanocrystals were examined by using X-ray diffraction/spectroscopy, electron microscopy, nitrogen adsorption–desorption methods following Brunauer-Emmett-Teller equation and vibrating sample magnetometer techniques, respectively. Removal of MgO impurity phase by leaching the resulting powder in the acetic acid solution yielded single phase Fe₂B nanocrystals with the crystallite size and specific surface area of 12.5 nm and 29 m²/g, respectively. Magnetization results clearly indicated the ferromagnetic behavior of Fe₂B nanocrystals with saturation magnetization observed around 96.26 emu·g^?1. Electron microscope images revealed coaxial/spherical powder shape and morphology of the single-phase Fe₂B nanocrystals.     

The role of coal in energy production—Consumption and sustainable development of Turkey

Energy is one of the indispensable factors regarding the assurance of social prosperity and economic development of a country. The developing countries struggle to obtain energy sources reliable in the long term to complete their economic development, and the developed countries struggle to get them to keep their present prosperity levels. Coal seems to continue its indispensable position among the other energy sources for many years because of its production in more than 50 countries, the least effect it has from the price fluctuation and its usage lifespan of more than 200 years. The countries that are aware of it have investments in mining fields in the countries rich in coal reserves, and they continue investing considerable amount of money.     

Security concerns in the Middle East for oil supply: Problems and solutions

Comprising 65–70% of the world's oil reserves, the Gulf States (Saudi Arabia, Iran, Iraq, Kuwait, UAE and Qatar) are key countries for the solutions to the energy supply matters of the world. Free flow of oil to the world markets from Gulf region is an indispensable part of the major security issues. The Middle East has had mainly security related problems such as Arab–Israeli wars and conflicts, Arab–Iranian war and conflicts, Arab–Arab war and conflicts, US–Gulf wars and conflicts and more recently radicalism and terrorist attacks. Energy supply security requires the enhancement of the peace and cooperation between countries instead of competition. Preventive policy approaches are more suitable to address energy supply matters. Preventive strategy might be possible with the active participation of NATO within the “out of area” type operations to the Middle East and quite possibly indirectly to the Asia-Pacific regions. Religious and ethnic radicalism and terrorist attacks has also direct effects over oil supply security matters.     

A Generic Architecture Multimedia Service and Management

A multimedia service architecture is constructedby using a generic component model. In order to derivespecific components, a generic service agent and genericservice component architectures are developed. Using generic agent and the service components,a TINA-C conformant object-oriented hierarchical genericservice component is developed and presented. As anexample, a multimedia QoS service and management architecture is presented.     

Efficient warpage optimization of thin shell plastic parts using response surface methodology and genetic algorithm

During the production of thin shell plastic parts by injection molding, warpage depending on the process conditions is often encountered. In this study, efficient minimization of warpage on thin shell plastic parts by integrating finite element (FE) analysis, statistical design of experiment method, response surface methodology (RSM), and genetic algorithm (GA) is investigated. A bus ceiling lamp base is considered as a thin shell plastic part example. To achieve the minimum warpage, optimum process condition parameters are determined. Mold temperature, melt temperature, packing pressure, packing time, and cooling time are considered as process condition parameters. FE analyses are conducted for a combination of process parameters organized using statistical three-level full factorial experimental design. The most important process parameters influencing warpage are determined using FE analysis results based on analysis of variance (ANOVA) method. A predictive response surface model for warpage data is created using RSM. The response surface (RS) model is interfaced with an effective GA to find the optimum process parameter values.     

Poly(o-anisidine) on brass: Synthesis and corrosion behavior

The electrochemical synthesis of poly(o-anisidine) (POA) was achieved on brass (CuZn) electrode by applying two scan rates (50 and 20 mVs⁻¹). The synthesized polymer films were strongly adherent and homogeneous in both cases. Their corrosion performance was investigated by AC impedance spectroscopy (EIS) technique, anodic polarization plots and open circuit potential-time curves, in 3.5% NaCl solution. It was clearly seen that poly(o-anisidine) films provided a significant physical protection for longer exposure time. It was shown that polymer film coated at high scan rate (CuZn/POA-H) exhibited better barrier property against the attack of corrosive agents when compared with polymer film obtained at low scan rate (CuZn/POA-L). It was found out that poly(o-anisidine) film synthesized at high scan rate caused a significant increase in corrosion resistance by its catalytic behavior on formation of protective oxide layers on the surface in longer time.