Groundwater Level Simulation Using Soft Computing Methods with Emphasis on Major Meteorological Components

Water Resources Management - Precise estimation of groundwater level (GWL) might be of great importance for attaining sustainable development goals and integrated water resources management....     

Output feedback controller for polytopic systems exploiting the direct searching of the design space

This paper deals with the problem of designing a robust static output feedback controller for polytopic systems. The current research that tackled this problem is mainly based on LMI method, which is conservative by nature. In this paper, a novel approach is proposed, which considers the design space of the controller parameters and iteratively partitions the space to small simplexes. Then, by assessing the stability in each simplex, the solution space for design parameters is directly determined. It has been theoretically proved that, if there exists a feasible solution in the design space, the algorithm can find it. To validate the result of the proposed approach, comparative simulation examples are given to illustrate the performance of the design methodology as compared to those of previous approaches.     

Ni-Rhodanine Complex Supported on FSM-16 as Mesoporous Silica Support: Synthesis,Characterization and Application in Synthesis of Tri and Tetrasubstituted Imidazoles and 3,4-Dihydropyrimidine-2-(1H)-Ones

A new, efficient and recoverable heterogeneous catalyst was successfully synthesized by functionalization of mesoporous silica FSM-16. The FSM-16/CPTMS-Rh-     

Characterization of the Ion Beam Current Density of the RF Ion Source with Flat and Convex Extraction Systems

Silicon - The characterization of ion beam current density distribution and beam uniformity is crucial for improving broad-beam ion source technologies. The design of the broad ion beam extraction...     

Optimizing the Runoff Estimation with HEC-HMS Model Using Spatial Evapotranspiration by the SEBS Model

Most of the commonly used hydrological models do not account for the actual evapotranspiration (ETa) as a key contributor to water loss in semi-arid/arid regions. In this study, the HEC-HMS (Hydrologic Engineering Center Hydrologic Modeling System) model was calibrated, modified, and its performance in simulating runoff resulting from short-duration rainfall events was evaluated. The model modifications included integrating spatially distributed ETa, calculated using the surface energy balance system (SEBS), into the model. Evaluating the model’s performance in simulating runoff showed that the default HEC-HMS model underestimated the runoff with root mean squared error (RMSE) of 0.14 m³/s (R²?=?0.92) while incorporating SEBS ETa into the model reduced RMSE to 0.01 m³/s (R²?=?0.99). The integration of HECHMS and SEBS resulted in smaller and more realistic latent heat flux estimates translated into a lower water loss rate and a higher magnitude of runoff simulated by the HECHMS model. The difference between runoff simulations using the default and modified model translated into an average of 95,000 m³ runoff per rainfall event (equal to seasonal water requirement of ten-hectare winter wheat) that could be planned and triggered for agricultural purposes, flood harvesting, and groundwater recharge in the region. The effect of ETa on the simulated runoff volume is expected to be more pronounced during high evaporative demand periods, longer rainfall events, and larger catchments. The outcome of this study signifies the importance of implementing accurate estimates of evapotranspiration into a hydrological model.

     

Condensation–cyclization reaction for one-pot synthesis of 1,3-thiazolidin-4-one derivatives by poly(p-phenylenediamine) grafted on LDHs as a catalyst with green tool

The three-component reaction between amine, carbonyl compound and thioglycolic acid is now considered as a major strategy for synthesis of 1,3-thiazolidin-4-ones, which consists of the following steps: (i) condensation of aldehyde and amine which results the formation of an imine; (ii) the reaction between thioglycolic acid and the imine which is followed by an intramolecular cyclization reaction, which leads to the formation of the final product. In this way, if no suitable catalyst is employed, the completion of the reaction will not be achieved. Hence, it is of great importance to select an appropriate catalyst so that these compounds can be successfully synthesized. Herein, we employed LDHs@PpPDA as a versatile catalyst for the fabrication of novel derivatives of 1,3-thiazolidin-4-one.     

Effects of Solvent Exchange Period and Heat Treatment on Physical and Chemical Properties of Rice Husk Derived Silica Aerogels

In this study, hydrophobic silica aerogels were synthesized from rice husk ash-derived sodium silicate through sol-gel processing, solvent exchange, surface modification and ambient pressure drying. By volume, 10% of trimethylchlorosilane (TMCS) in 90% of n-hexane was used as a hydrophobic solution in the surface modification process. The physical and chemical properties of silica aerogels were characterized by density and porosity measurements, scanning electron microscopy (SEM), Fourier transforms infrared (FTIR) spectroscopy, Brunauer–Emmett–Teller theory (BET) and dynamic scanning calorimetry (DSC). The hydrogels prepared were in the form of 2.5 ± 0.5 mm beads and then converted into alcogels through solvent exchange with ethanol for repetition of 3, 6 and 9 days. It is found that the optimal quality of silica aerogels with the BET surface area as high as 668.82 m²/g was obtained from the alcogels of the solvent exchange period of 9 days. Depending on the size of the gel’s block, a longer solvent exchange period will ensure adequate removal of pore water. Post heat treatment on silica aerogels obtained from the 9 days of solvent exchange at 200, 300 and 400 °C for 2 h results in slight decreased of aerogel’s density from 0.048 g/cm³ to 0.039 g/cm³ and the hydrophobicity of the aerogels is decreased above 380 °C as confirmed by DSC analysis.

     

An analytical framework for event mining in video data

With the high availability of digital video contents on the internet, users need more assistance to access digital videos. Various researches have been done about video summarization and semantic video analysis to help to satisfy these needs. These works are developing condensed versions of a full length video stream through the identification of the most important and pertinent content within the stream. Most of the existing works in these areas are mainly focused on event mining. Event mining from video streams improves the accessibility and reusability of large media collections, and it has been an active area of research with notable recent progress. Event mining includes a wide range of multimedia domains such as surveillance, meetings, broadcast, news, sports, documentary, and films, as well as personal and online media collections. Due to the variety and plenty of Event mining techniques, in this paper we suggest an analytical framework to classify event mining techniques and to evaluate them based on important functional measures. This framework could lead to empirical and technical comparison of event mining methods and development of more efficient structures at future.