Adaptive Noise Cancellation Method Used for Wheel Speed Signal of Integrate ABS/ASR System

The anti-lock braking system (ABS) and anti-slip regulation system(ASR) are the very i mportantparts of active safety systems used for modern vehi-cles . This two systems make up of commonintegratesystem ABS/ASR[1 ,2]. At present ,the main controlmethodin ABS/ASRis the logic threshold method.When getting the wheel speed signal ,ECUcomputesand applies control after comparing current signalwith the threshold[3 -5].Because of many reasons ,the wheel speed sig-nals sampled in ABS/ASRalw…     

Electronic Brake Force Distribution Control Methods of ABS Equipped Vehicles During Cornering Braking

Based on the dynamics of ABS-equipped vehicles during cornering braking, the electronic brake-force distribution (EBD) control methods of ABS-equipped vehicles during cornering braking are proposed. According to the dynamics and the tire model under tire adhesion limit, the stability acceptance criteria of vehicles during cornering braking are proposed. According to the stability acceptance criteria and the ABS control, the EBD control methods of ABS-equipped vehicles during cornering braking are implemented by adjusting the threshold values of tires slip independently. The vehicle states during cornering braking at two typical initial velocities of the vehicle are analyzed by the EBD control methods, whose results indicate the EBD control methods can improve the braking performances of the vehicle during cornering braking comparing with the ABS control.     

Estimation of Vehicle Speed Based on Wheel Speeds from ASR System in Four-Wheel Drive Vehicles

Three major methods currently in the use of determining vehicle speed based on wheel speeds,the minimum wheel speed,minimum wheel speed corrected by slope method and the Kalman filter method,are analyzed,with merits and defects of each approach stated. Through simulations,the Kalman filter method based on minimum wheel speed shows improved accuracy,in addition to better adaptivity to vehicle reference speed. It also can be used to acceleration ship regulation (ASR) in part-time four-wheel drive vehicles.     

New Method of Road Surface Identification in Anti-Lock Braking System

Based on the vehicle-road dynamic model, the road characteristic parameter, which depends on different types of road surfaces, is introduced and a new method of road surface identification for automotive anti-lock braking system (ABS) is proposed. According to the characteristics of vehicle-road dynamic model, a simple math resolution method of the model‘s factors is established. Only using the information of wheel speed, the vehicle reference velocity and the wheel slip ratio are estimated real-timely. And based on the wheel dynamic model, the road characteristic parameter is determined to identify the road surface for the determination of thresholds of ABS regulative parameters. With this new method, the road surface identification can be accurately obtained and calculation time is short that it can meet the ABS real time control need, and it also improves the performance of ABS.     

基于ABS的ABS/ASR集成液压系统设计

介绍一种基于JETTA GTX轿车ABS液压系统的ABS／ASR集成液压系统改造方案，该ABS／ASR集成液压系统在原有ABS液压系统的基础上增加较少的液压元件实现全部ABS功能和ASR制动干预控制功能，改造后的集成系统工作可靠，不影响原有的常规制动和ABS制动过程。     

汽车ABS电机故障诊断

详细论述了实现汽车ABS电机故障诊断的基本原理,方法和硬件电路设计,并将其应用于自主开发的ABS故障诊断系统中,经实车试验,效果良好.     

带锥敏感薄膜形变特性有限元仿真

在一种新的基于真空二极管原理的场发射压力传感器中 ,阴极发射尖锥体和敏感薄膜制备于同一硅片上 ,从而简化了传感器的封装工艺 ,但因此可能导致传感器灵敏度的减小。利用有限元仿真技术 ,计算了在外部压力作用下 ,几何形状比较复杂的带尖锥体敏感薄膜的横向挠度形变特性。计算结果表明 ,与不带尖锥体的敏感薄膜相比较 ,带尖锥体敏感薄膜在额定外部静压力作用下的最大横向挠度的减小量小于 0 .4% ,因此对传感器灵敏度的影响可以忽略不计     

汽车嵌入式SoC系统的应用与发展

介绍了作为泛计算领域重要组成部分的汽车嵌入式系统由低端到高端的发展历程和各个阶段的主要特点,详细论述了嵌入式SoC系统应用于汽车电子方面的新理论、新方法和关键技术,并对汽车嵌入式SoC系统的发展趋势进行了展望。     

汽车自适应巡航控制系统的发展

详细叙述了汽车自适应巡航控制系统ACC的组成、工作原理、所需要的关键技术和存在的问题.介绍了近年来该系统在国内外所取得的成果,对ACC系统的未来发展进行了预测.     

高速响应电磁阀弹簧疲劳寿命的仿真计算

使用有限元技术对高速响应电磁阀弹簧元件的疲劳寿命计算进行仿真可以准确计算弹簧在实际使用时内部应力的分布，根据该应力可以进行疲劳寿命设计计算，提高计算的准确性，具有工程实际意义。