Computer‐aided design methodology for linearity enhancement of multiwatt GaN HEMT amplifiers using multiple parallel devices

This article presents a design methodology for linearizing GaN HEMT amplifiers based on splitting a large FET into multiple parallel FETs with same total gate periphery and by biasing them individually. By varying the biases, the magnitude and the phase of the IMD3 components at the output of FET changes. A detailed simulation methodology using commercial microwave CAD software is presented. Simulation results show that by biasing one device in Class AB and other(s) in deep Class AB mode, IMD3 components of parallel FETs can be made out of phase to each other leading to cancellation and improvement in linearity. Three prototype circuits were simulated using (a) a single 5 mm FET (1 × 5 mm), (b) two parallel 2.5 mm FETs (2 × 2.5 mm), and (c) four parallel 1.25 mm FETs (4 × 1.25 mm), for a total gate periphery of 5 mm, over the frequency range of 0.8 to 1.0 GHz. IMD3 improvement up to 20 dBc was achieved with the 4 × 1.25 mm circuit when the FET biases were optimized. Measurement results show improvement in linearity up to 20 dBc for 4 × 1.25 mm circuit. The proposed method improves linearity without a substantial penalty on the power consumption and is straightforward to implement.     

Spectroscopic and Simulation Analysis of Facile PEDOT:PSS Layer Deposition-Silicon for Perovskite Solar Cell

In this research work, we have characterized and simulated a well-known hole transport material (HTM) for perovskite solar cell (PSC) and conductive polyme     

Mechanics and FEM estimation of gaps generated in star-ring active contacts of ORBIT motor during operation

International Journal of Mechanics and Materials in Design - We estimate deformations or gaps occurring at all the ideally form-closed contacts, that separate the chambers, in epitrochoid...     

Intrinsically conducting polymers in flexible and stretchable resistive strain sensors: a review

Journal of Materials Science - Flexible and stretchable strain sensors are in great demand in advanced health care, human–machine interface, stretchable electronics, electronic skin, etc. Of...     

Using a chemical equilibrium model to predict amendments required to precipitate phosphorus as struvite in liquid swine manure

Precipitation of phosphate minerals from liquid swine manure is an established means of reducing the orthophosphate (OP) concentration. This project investigated the usefulness of a chemical equilibrium model, Visual Minteq, for prescribing the amendments needed to maximize struvite precipitation from liquid swine manure and thus reduce the OP phosphorus concentration. The actual concentrations of Mg(2+), Ca(2+), K(+), OP, NH(4)(+), alkalinity and pH from a liquid swine manure system were used as inputs to the model. The model was modified to remove species with extremely low formation rates, because they would not significantly precipitate in the reaction occurring in a short retention-time process such as those envisioned for swine manure struvite-formation reactors. Using the model's output, a series of 19-L reactors were used to verify the results. Verification results demonstrated that Visual Minteq can be used to pre-determine the concentration of amendments required to maximize struvite recovery.     

Green Nanocomposites of Natural Rubber/ Olivine Nanosilica: Viscoelastic,Mechanical, Transport and Thermal Characterizations

Silicon - Nanosilica was synthesized from a low cost raw material, olivine by a more sustainable and cost effective method. The pure nanosilica obtained was amorphous in nature with a surface area...     

Analysis of Fatty Acid and Lignan Composition of Indian Germplasm of Sesame to Evaluate Their Nutritional Merits

An attempt was made to individually analyze a germplasm collection of 54 indigenous Indian sesame cultivars for fatty acid and lignan composition of their seed oil by gas chromatography and high performance liquid chromatography, respectively. The entries varied in their fatty acid and lignan composition. The mean percentage contents of palmitic, stearic, oleic, linoleic and α‐linolenic acids ranged between 10–22, 5–10, 38–50, 18–43 and less than 1 whereas sesamol, sesamin and sesamolin scored between 3–37, 27–67, 20–59 of the total percentage of lignan, respectively. The highest percentage of α‐linolenic acid (ALA) was obtained in Var‐9 (1.3 % of the total fatty acids). Among the lignans, high sesamin content is considered to be significant, particularly in terms of long shelf life and nutraceutical value of sesame seed oil. The study has broadened our understanding related to differential biochemical composition of the rich sesame germplasms, thereby providing us with a useful groundwork for identifying potential targets and suitable cultivars for genetic engineering approaches to be undertaken in order to improve the nutritional quality of sesame oil, which in turn would be beneficial towards human health.     

Carbon nanohorn‐graphene nanoplate hybrid: An excellent electrode material for supercapacitor application

This study describes the capacitor behavior of carbon nanohorn (CNH)/graphene nanoplate (GNP) hybrid (CNGN). The well‐CNH‐decorated GNP‐plate electrode materials show high capacitance value (≈677 F/g) and can be extensively used in new generation for energy storage. In the hybrid (CNGN), two nanofillers jointly affect the capacitance behavior and increase the capacitance value of the CNGN hybrid. Homogeneous coating of CNH over the GNP plate plays an effective role to enhance the capacitance behavior of the composite. Field emission scanning electron microscopy and high‐resolution transmission electron microscopy analysis of the composite confirmed the CNH coating on the GNP plate. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42118.     

Poly(ethylene oxide)‐g‐gellan polysaccharide nanocarriers for controlled gastrointestinal delivery of simvastatin

Herein, a novel gellan polysaccharide‐based amphiphilic copolymer was synthesized for the development of simvastatin‐loaded micellar nanoparticles. The nanoparticles were explored for their controlled drug release and improved pharmacodynamic potentials. The copolymer was characterized by Fourier transform infrared spectroscopy (FTIR) and elemental analysis. The onset of copolymer micellization was detected by fluorescence spectroscopy. Simvastatin was loaded into micellar particles by solvent evaporation method and the particles were then characterized by microscopic and light scattering techniques. The physical state of drug was studied by X‐ray diffraction analysis. Pharmacodynamic assessment of the micellar preparations was done on rabbit models. The copolymer formed micellar nanoparticles in water. Critical micellar concentration was 9.12mg/l. The micellar particles (426.8–912.6nm) entrapped a maximum of 18.86% drug. Higher negative zeta potential indicated physical stability of micellar systems. A simple diffusion mechanism was operative in the event of comparatively faster drug release in pH6.8 phosphate buffer solution. No significant drug‐copolymer interaction was traced by FTIR spectroscopy. The amorphization of drug into micellar particles reduced LDL‐cholesterol level by ～45% in hyperlipidemic rabbits and this was about 2.5 times higher than pure drug dispersion. Copolymer micellar nanoparticles of simvastatin could control cholesterol level in hyperlipidemic rabbits and thus had potential in drug delivery applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42399.