Investigation on La3+ and Dy3+ co-doped ceria ceramics with an optimized average atomic number of dopants for electrolytes in IT-SOFCs

In the present study, we investigate the fundamental properties of CeO₂ by selecting La³⁺ (57), and Dy³⁺ (66) as dopants with optimized average atomic number of 61.5, which lies in between Pm³⁺ (62) and Sm³⁺ (62) in accordance with the criteria for optimum doping. A system of co-doped ceria ceramics Ce_1–x–yLa_xDy_yO_2-δ ((x, y) = (0.00, 0.00), (0.025, 0.025), (0.05, 0.05), (0.075, 0.075), (0.10, 0.10), (0.00, 0.20) and (0.20, 0.00)) as electrolytes for intermediate temperature solid oxide fuel cells were successfully prepared by a well-known sol-gel auto-combustion route. In order to obtain dense samples, the prepared pellets were sintered in air at 1300 °C for 4 h using conventional furnace and relative densities of all the samples were found to be higher than 95%. Single phase cubic structure, microstructural density and elemental composition analysis of all the samples were studied by powder X-ray diffraction, scanning electron microscope and energy dispersive spectroscopy techniques, respectively. Raman spectroscopy analysis confirmed the formation of concentrated O^2-–vacancies in the co-doped ceria system. Impedance spectroscopy measurements revealed the high value of total ionic conductivity and low activation energy for the composition Ce_0.85La_0.075Dy_0.075O_2?δ i.e., 2.08 × 10^–2 S cm^–1 and 0.58 eV, respectively. Linear thermal expansion analyses of all the samples revealed the matched thermal expansion coefficients. Finally, these results recommend that the Ce_0.85La_0.075Dy_0.075O_2?δ sample can be useful as a solid electrolyte in IT-SOFC applications.     

Optimal operation and tracking control of vapor-recompressed batch distillation

Vapor recompressed batch distillation (VRBD) is an energy-integrated configuration which works on the principle of a heat pump. Operation of such a column is challenging due to unsteady, nonlinear dynamics and strong interplay between separation and energy efficiency. In this paper, a two-step approach is proposed for optimal operation and control of such a column. Initially, an openloop optimal operation policy is generated for maximization of an overall performance index using offline optimization. To this end, three performance indices are proposed to capture interplay between separation and energy efficiency. Subsequently, a model-based output feedback controller is designed to track this optimal performance trajectory. The effectiveness of the proposed approach is demonstrated using a benzene-toluene separation case study wherein it is shown that the proposed approach helps to achieve optimal operation in the presence of operational disturbances.     

Enhanced Dissolution of Ibuprofen Using Solid Dispersion with Polyethylene Glycol 20000

To improve its dissolution, ibuprofen solid dispersions (SDs) were prepared in a relatively easy and simple manner, characterized by scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR), and evaluated for solubility and in vitro drug release. Loss of individual surface properties during melting and re-solidification as revealed by SEM micrographs indicated the formation of effective SDs. Absence or shifting toward the lower melting temperature of the drug peak in SDs in DSC study indicated the possibilities of drug–polymer interactions. FTIR spectra showed the presence of drug crystalline in SDs. The effect of improved dissolution on the oral absorption of ibuprofen in rats was also studied. Quicker release of ibuprofen from SDs in rat intestine resulted in a significant increase in AUC and C_max, and a significant decrease in T_max over pure ibuprofen. Preliminary results from this study suggested that the preparation of fast dissolving ibuprofen SDs by low-temperature melting method using polyethylene glycol 20000 as a meltable hydrophilic polymer carrier could be a promising approach to improve solubility, dissolution, and absorption rate of ibuprofen.     

Influence of copper substitution on magnetic and electrical properties of MgCuZn ferrite prepared by microwave sintering method

Polycrystalline MgCuZn ferrites with chemical formula Mg_0.50-xCu_xZn_0.50Fe₂O₄ (x = 0.00, 0.05, 0.10, 0.15, 0.20, 0.25 and 0.30) were prepared by microwave sintering method. These powders were calcined, compacted and sintered at 950 °C for 30 min. Structural, microstructural and elemental analyses were carried out using X-ray diffraction (XRD), scanning electron microscope (SEM) and energy dispersive X-ray spectrometry (EDS), respectively. The lattice parameter is found to increase with increasing copper content. A remarkable densification is observed with the addition of Cu ions in the ferrites. The sintered ferrite was characterized for initial permeability, dielectric constant and dielectric loss tangent and ac conductivity measurements. The temperature variation of the initial permeability of these samples was carried out from 30 °C to 200 °C. The dielectric constant, dielectric loss tangent and ac conductivity have been measured in the frequency range of 100 Hz to 1 MHz. Initial permeability and dielectric constant were found to increase and dielectric loss decreased with Cu substitution for Mg, up to x = 0.20. The ferrite powder prepared is suitable for the application in multilayer chip inductor due to its low-temperature sinterability, good magnetic properties and low loss at high frequency.     

Gold nanorods mediated controlled release of doxorubicin: nano-needles for efficient drug delivery

Use of cysteamine hydrochloride (Cys-HCl) protected gold nanorods (GNRs) as efficient carrier of widely used anti-cancer drug doxorubicin using folic acid as navigational molecule is presented in this work. GNRs were found to have excellent drug loading capacity of >97 %. A detailed comprehension of in vitro drug release profile under ideal physiological condition was found to obey 1st order kinetics at pH 6.8, 5.3 and 7.2, an ideal milieu for drug delivery to solid tumours.     

Nonparametric methods for 1-out-of-2: G repairable systems

The steady state availability of 1-out-of-2 : G repairable system is obtained under the assumption that the life time of a component in standby position follows exponential distribution. It's nonparmetric estimator is proposed. The asymptotic properties of the estimator are used to provide the fixed width coinfience interval with specified coverage probability and testing of hypothesis problem using sequential procedure.     

SPRERI experience on holistic approach to utilize all parts of Jatropha curcas fruit for energy

Freshly harvested Jatropha dried fruit contains about 35–40% shell and 60–65% seed (by weight). The fruits are 2.5 cm long, ovoid, black and have 2–3 halves. It has nearly 400–425 fruits per kg and 1580–1600 seed per kg weight. Weight of 100 seeds is about 63 g. Jatropha shells are available after de-shelling of the Jatropha fruit while Jatropha seed husks are available after decortications of Jatropha seed for oil extraction. Seed contains about 40–42% husk/hull and 58–60% kernels. The kernels have about 50% oil. If the oil is extracted by solvent method the oil recovery is more than 95% but in mechanical expeller the oil recovery is about 85% only. If 100 kg of seed is expelled by expeller it will give about 28–30 kg oil. While lot of emphasis is being given on use of bio-diesel, which is only about 17–18% of the dry fruit, not much attention is being given to utilize other components of fruit for energy purposes.At SPRERI holistic approach has been taken to utilize all components of the Jatropha fruit—shell for combustion, hull/husk for gasification, oil and bio-diesel for running CI engines, cake for production of biogas and spent slurry as manure and it has been found that all components of the Jatropha curcas fruit can be utilized efficiently for energy purposes. This paper gives detailed information on the use of different components of J. curcas fruit for energy purposes.     

Structural and optical properties of Zn3P2 thin films

Conditions have been developed for the deposition of a stoichiometric thin film of zinc phosphide (Zn₃P₂) using electron beam evaporation. Structural properties of as-deposited and annealed thin films of zinc phosphide have been studied using electron and X-ray diffraction. The as-deposited film is non-crystalline, structural ordering starts on annealing at 200° C and the film becomes crystalline at 300° C with the structure matching that of the bulk material. Optical absorption has been investigated over the range 1 to 3 eV with emphasis on the region of interband absorption. The thin film absorption edge is found to be exponential for lower values of absorption coefficient. Analysis of thin film data showed that Zn₃P₂ is a direct-band-gap material. On annealing there is a shift in the band edge towards higher energy. NCL Communication No. 3571.     

Development of a simple low-cost solar simulator for indoor collector testing

Indoor test methods for solar collectors are widely accepted and recommended by ASHRAE. The development of a solar simulator for indoor testing and the certification procedure for photo-thermal solar devices is discussed in this paper. The system consists of 14 quartz halogen lamps and provides a testing area of about 1 × 1 m. The irradiance can be varied from 400 to 1500 W/m². This is achieved by varying the input power supplied to individual lamps. The radiation output characteristics of a single lamp have been studied. The distribution of intensity over the covered area of 1·20 × 1·20 m has been recorded using a precision Eppley pyranometer.A variety of collectors—evacuated tubular collectors and flat-plate collectors of both liquid and air heating types—has been tested under sufficiently stable insolation conditions. Results for a conventional solar air heater are presented together with suggestions for further improvements.     

Analysis of a solar water heating system with n-tanks in series

A straightforward analysis of a solar water heating system with n-tanks connected in series has been presented. The long-term performance of the system has also been studied. On the basis of numerical calculations made for four successive days, the following conclusions have been drawn:

1. (1) The fluctuation in temperature variation decreases with increase of the number of tanks connected in series.

2. (2) The variation becomes smooth after the second successive day, which is more desirable from the point of view of users.