Integrated and inherently safe design and operation of a mobile power generation: Process intensification through microreactor reformer and HT-PEMFC

In the present study, due to various advantages of process miniaturization, the integrated design and operation of a mobile power generation system consisting of a microreactor reformer and a proton exchange membrane fuel cell (PEMFC) are investigated. The hydrogen fuel is supplied through autothermal steam-reforming of methanol in a microreactor leading to a safer, as well as more efficient, and economical operation. A high-temperature polymer membrane fuel cell with external accessories is applied for power generation. Then, simulation-optimization programming is applied for simultaneously optimizing the process design and operation at the same level. The result shows that the implemented procedure ensures the economic and flexible operation of the process while satisfying the safety constraints. The maximum gross power and net power generation are 109.3 and 91.9, respectively, while the cost of hydrogen production reduces from 13 to 20 $/kg to 7.7 $/kg. The fuel (methanol) consumption can be as low as 0.42 L/kWh.     

Effect of the Wet Outlet Geometry on the Shockwave Position in Supersonic Separators

Supersonic separators (3Ss) are applied in gas separation processes. Two-dimensional simulation is employed to investigate the effect of operational and thermophysical parameters on the shockwave position. In addition, the impact of the cyclonic part and wet outlet geometry is evaluated by proposing four cases. Increasing the length of the cyclonic part exerts positive and negative influences on the performance of the 3S and the pressure recovery coefficient, respectively. The optimum length is determined between 10 and 15 cm. To demonstrate negative effects of wasted air from the wet outlet, its flow has been increased from 3.6 to 8.1 % of the inlet flow. Improved performance of the 3S is obtained by reducing the flow disturbances around the wet outlet and moving the shockwave towards the outlet.     

Numerical simulation of a falling droplet surrounding by air under electric field using VOF method: A CFD study

This is a numerical study of a falling droplet surrounding by air under the electric field modeled with finite volume method by means of CFD. The VOF method has been employed to model the two-phase flow of the present study. Various capillary numbers are investigated to analyze the effects of electric field intensity on the falling droplet deformation. Also, the effects of electric potential on the heat transfer coefficient have been examined. The obtained results showed that by applying the electric field at a capillary number of 0.2 the droplet tends to retain its primitive shape as time goes by, with a subtle deformation to an oblate form. Intensifying the electric field to a capillary number of 0.8 droplet deformation is almost insignificant with time progressing; however, further enhancement in capillary number to 2 causes the droplet to deform as a prolate shape and higher values of this number intensify the prolate form deformation of the droplet and result in pinch-off phenomenon. Ultimately, it is showed that as the electric potential augments the heat transfer coefficient increases in which for electric potential values higher than 2400 V the heat transfer coefficient enhances significantly.     

Numerical investigation of grooves effects on the thermal performance of helically grooved shell and coil tube heat exchanger

Heat exchangers are integral parts of important industrial units such as petrochemicals, medicine and power plants. Due to the importance of systems energy consumption, different modifications have been applied on heat exchangers in terms of size and structure. In this study, a novel heat exchanger with helically grooved annulus shell and helically coiled tube was investigated by numerical simulation. Helically grooves with the same pitch of the helical coil tube and different depth are created on the inner and outer wall of annulus shell to improve the thermal performance of heat exchanger. In the first section, thermal performance of the shell and coil heat exchanger with the helical grooves on its outer shell wall was compared with same but without helical grooves. At the second section, helically grooves created on both outer and inner wall of the annulus shell with different groove depths. The results showed that the heat exchanger with grooves on both inner and outer shell wall has better thermal performance up to 20% compared to the heat exchanger with grooves on only outer shell wall. The highest thermal performance achieves at lower flow rates and higher groove depths whereas the pressure drop did not increase significantly.     

Control of three phase PWM rectifier using virtual flux‐based predictive direct power control and SVM under harmonic conditions

In this paper, a new predictive direct power control algorithm to control the PWM rectifier based on virtual flux (VF) is presented. In this algorithm, supply network and the line inductances are assumed as an induction machine and so virtual flux space vectors are assumed corresponding with the space vector of the network voltages. Instantaneous active and reactive powers and finally convertor average voltage in both stationary and rotating reference frames are calculated by the virtual flux space vector components. The main advantages of the proposed method are low total harmonic distortion of the input current and low ripple in the instantaneous active and reactive powers and direct current‐bus voltage under harmonic distorted condition of the supply voltage in comparison with voltage‐based predictive direct power control (V‐PDPC) method. Proposed VF‐PDPC method with space vector modulation switching strategy was tested in simulations and compared with the V‐PDPC method. Copyright © 2015 John Wiley & Sons, Ltd.