Matrix Manipulation of Directly-Synthesized PbS Quantum Dot Inks Enabled by Coordination Engineering

The direct-synthesis of conductive PbS quantum dot (QD) ink is facile, scalable, and low-cost, boosting the future commercialization of optoelectronics based on colloidal QDs. However, manipulating the QD matrix structures still is a challenge, which limits the corresponding QD solar cell performance. Here, for the first time a coordination-engineering strategy to finely adjust the matrix thickness around the QDs is presented, in which halogen salts are introduced into the reaction to convert the excessive insulating lead iodide into soluble iodoplumbate species. As a result, the obtained QD film exhibits shrunk insulating shells, leading to higher charge carrier transport and superior surface passivation compared to the control devices. A significantly improved power-conversion efficiency from 10.52% to 12.12% can be achieved after the matrix engineering. Therefore, the work shows high significance in promoting the practical application of directly synthesized PbS QD inks in large-area low-cost optoelectronic devices.     

Water vapor volatilization and oxidation induced surface cracking of environmental barrier coating systems: A numerical approach

A numerical model is developed for surface crack propagation in brittle ceramic coatings, aiming at the intrinsic failure of rare-earth silicate environmental barrier coating systems (EBCs) under combustion conditions in advanced gas turbines. The main features of progressive degradation of EBCs in such conditions are captured, including selective silica vaporization in the top coat due to exposure to water vapor, diffusion path-dependent bond coat oxidation, as well as crack propagation during cyclic thermal loading. In light of these features, user-defined subroutines are implemented in finite element analysis, where surface crack growth is simulated by node separation. Numerical results are validated by existing experimental data, in terms of monosilicate layer thickening, thermal oxide growth, and fracture behaviors. The experimentally observed quasi-linear oxidation in the early stage is also elucidated. Furthermore, it is suggested that surface crack undergoes rapid propagation in the late stage of extended thermal cycling in water vapor and leads to catastrophic failure, driven by both thermal mismatch and oxide growth stresses. The latter is identified as the dominant mechanism of penetration. Based on detailed analyses of failure mechanisms, the optimization strategy of EBCs composition is proposed, balancing the trade-off between mechanical compliance and erosion resistance.     

Nitrate Additives Coordinated with Crown Ether Stabilize Lithium Metal Anodes in Carbonate Electrolyte

Lithium metal anodes (LMAs) are promising for next-generation batteries but have poor compatibility with the widely used carbonate-based electrolytes, which is a major reason for their severe dendrite growth and low Coulombic efficiency (CE). A nitrate additive to the electrolyte is an effective solution, but its low solubility in carbonates is a problem that can be solved using a crown ether, as reported. A rubidium nitrate additive coordinated with 18-crown-6 crown ether stabilizes the LMA in a carbonate electrolyte. The coordination promotes the dissolution of NO₃⁻ ions and helps form a dense solid electrolyte interface that is Li₃N-rich which guides uniform Li deposition. In addition, the Rb (18-crown-6)⁺ complexes are adsorbed on the dendrite tips, shielding them from Li deposition on the dendrite tips. A high CE of 97.1% is achieved with a capacity of 1 mAh cm⁻² in a half cell, much higher than when using the additive-free electrolyte (92.2%). Such an additive is very compatible with a nickel-rich ternary cathode at a high voltage, and the assembled full battery with a cathode material loading up to 10 mg cm⁻² shows an average CE of 99.8% over 200 cycles, indicating a potential for practical use.     

Enhanced electromagnetic microwave absorption of Fe/C/SiCN composite ceramics targeting in integrated structure and function

The Fe/C/SiCN composite ceramics were synthesized by polymer-derived method to obtain the integration of structure and functions. The electromagnetic waves (EMW) absorption properties at X and Ku bands were investigated. The addition of nano-sized Fe particles improved the magnetic loss and impedance matching, and the carbon nanotubes generated by the iron in-situ catalysis increased the internal relaxation polarization and interfacial polarization, which together improved the EMW absorption properties significantly. In particular, the Fe/C/SiCN-9 showed the optimum reflection loss (RL) of ?31.06 dB at 10.03 GHz with an effective absorption bandwidth (EAB, RL < ?10 dB) of 3.03 GHz at 2.51 mm, indicating the excellent EMW absorption properties of Fe/C/SiCN composite ceramics.     

Bioinspired Supramolecular Slippery Organogels for Controlling Pathogen Spread by Respiratory Droplets

Surface-deposited pathogens are sources for the spread of infectious diseases. Protecting public facilities with a replaceable or recyclable antifouling coating is a promising approach to control pathogen transmission. However, most antifouling coatings are less effective in preventing pathogen-contained respiratory droplets because these tiny droplets are difficult to repel, and the deposited pathogens can remain viable from hours to days. Inspired by mucus, an antimicrobial supramolecular organogel for the control of microdroplet-mediated pathogen spread is developed. The developed organogel coating harvests a couple of unique features including localized molecular control-release, readily damage healing, and persistent fouling-release properties, which are preferential for antifouling coating. Microdroplets deposited on the organogel surfaces will be spontaneously wrapped with a thin liquid layer, and will therefore be disinfected rapidly due to a mechanism of spatially enhanced release of bactericidal molecules. Furthermore, the persistent fouling-release and damage-healing properties will significantly extend the life-span of the coating, making it promising for diverse applications.     

一种关于旅行商问题适用范围的优化方法

针对旅行商问题适用范围存在的局限性,结合实际的仓库拣货作业优化实例开展研究.考虑仓库内各货位点之间的相对位置关系以及拣货员可能行走的路线,设计出关于拣货员行走路线的分类算法;提出虚拟点的概念来解决旅行商问题求解时起点、终点不一致的问题;利用虚拟点,根据任务单要求找出拣货员所有的最优位置访问顺序;比较每一种情况,得到拣货员的最优路径,以实现缩短拣货总时间、减少人力和物力的总目标,较好地提高拣货效率.     

Enhanced thermal conductivity and stability of boron nitride/phenyl silicone rubber composites via surface modification and grain alignment

Journal of Materials Science - With the extensive use of high-power electronic appliances, polymer-based thermal insulation composites with excellent thermal properties are utilized in the field of...     

A two-step shapelets based framework for interactional activities recognition

Multimedia Tools and Applications - Human-human interactions recognition has high potential to have a big impact on enabling robots being able to interact with people. Recently, body sensor...     

Effects of four multi-compound freezing medium on the quality of red drum (Sciaenops ocellatus) during frozen storage

Taking air freezing (AF) as the reference, the effects of four types of multi-compound freezing medium for cryogenic liquid quick-freezing (immersion freezing, IF) on the freezing rate, quality and myofibrillar protein (MP) denaturation of red drum (Sciaenops ocellatus) fillets during frozen storage (−18°C) from days 0 to 90 were studied. Samples were gathered on days 0, 15, 30, 45, 60 and 90 for analysis. The results showed that IF groups (IF-1: 20% ethanol, 30% propylene glycol, 10% sodium chloride aqueous solution; IF-2: 20% ethanol, 20% propylene glycol, 10% glycerol, 10% sodium chloride aqueous solution; IF-3: 20% ethanol, 20% propylene glycol, 10% polyethylene glycol, 10% sodium chloride aqueous solution; IF-4: 20% ethanol, 20% propylene glycol, 5% glycerol, 5% polyethylene glycol, 10% sodium chloride aqueous solution) significantly shortened the time to cross the formation zone of maximum ice crystals while the freezing rate was 6.13 times higher than the AF group after adding 30% propylene glycol as the freezing medium. Furthermore, compared with the AF group, the IF groups significantly reduced losses in the water-holding capacity, the myofibrillar fragmentation index, microstructure damage, texture characteristics, drip loss and water migration (P < 0.05). In addition, the MP of IF groups had higher maximum transition temperatures (T_max1 and T_max2), total sulfhydryl content, Ca²⁺-ATPase activity and relative α-helix content compared with the AF group. In conclusion, IF could significantly increase the freezing rate of red drum fillets, and slow down quality deterioration and denaturation of MP during frozen storage for 90 days (−18°C). In particular, IF-2 (20% ethanol, 20% propylene glycol, 10% glycerol, 10% sodium chloride aqueous solution) was found to be more suitable for the immersion freezing of marine fish among the four multi-compound freezing medium.