Suspension and Mixing Characterization of Intermittent Agitation Modes in DASGIP Bioreactors

Intermittent agitation strategies have been increasingly used for a range of process development applications, i.e., to modulate physical cues, to improve stem cell differentiation yields, and to control hydrodynamic shear stresses in microcarrier suspension; however, there is a distinct lack of characterization. Both continuous and intermittent agitation modes in relation to suspension and mixing dynamics within a DASGIP bioreactor were characterized. Suspension dynamics were found to be affected by microcarrier porosity and the degree of settling was found to be more pronounced at the top of the bioreactor. Mixing time characterization showed a marked improvement in mixing efficiency for intermittent agitation, with an overall dependence on the timing of tracer insertion.     

Retinal Cell Death Caused by Sodium Iodate Involves Multiple Caspase-Dependent and Caspase-Independent Cell-Death Pathways

Herein, we have investigated retinal cell-death pathways in response to the retina toxin sodium iodate (NaIO₃) both in vivo and in vitro. C57/BL6 mice were treated with a single intravenous injection of NaIO₃ (35 mg/kg). Morphological changes in the retina post NaIO₃ injection in comparison to untreated controls were assessed using electron microscopy. Cell death was determined by TdT-mediated dUTP-biotin nick end labeling (TUNEL) staining. The activation of caspases and calpain was measured using immunohistochemistry. Additionally, cytotoxicity and apoptosis in retinal pigment epithelial (RPE) cells, primary retinal cells, and the cone photoreceptor (PRC) cell line 661W were assessed in vitro after NaIO₃ treatment using the ApoToxGlo™ assay. The 7-AAD/Annexin-V staining was performed and necrostatin (Nec-1) was administered to the NaIO₃-treated cells to confirm the results. In vivo, degenerating RPE cells displayed a rounded shape and retracted microvilli, whereas PRCs featured apoptotic nuclei. Caspase and calpain activity was significantly upregulated in retinal sections and protein samples from NaIO₃-treated animals. In vitro, NaIO₃ induced necrosis in RPE cells and apoptosis in PRCs. Furthermore, Nec-1 significantly decreased NaIO₃-induced RPE cell death, but had no rescue effect on treated PRCs. In summary, several different cell-death pathways are activated in retinal cells as a result of NaIO₃.     

Supramolecular Assembly of Aminoethylene‐Lipopeptide PMO Conjugates into RNA Splice‐Switching Nanomicelles

Phosphorodiamidate morpholino oligomers (PMOs) are oligonucleotide analogs that can be used for therapeutic modulation of pre‐mRNA splicing. Similar to other classes of nucleic acid‐based therapeutics, PMOs require delivery systems for efficient transport to the intracellular target sites. Here, artificial peptides based on the oligo(ethylenamino) acid succinyl‐tetraethylenpentamine (Stp), hydrophobic modifications, and an azide group are presented, which are used for strain‐promoted azide‐alkyne cycloaddition conjugation with splice‐switching PMOs. By systematically varying the lead structure and formulation, it is determined that the type of contained fatty acid and supramolecular assembly have a critical impact on the delivery efficacy. A compound containing linolenic acid with three cis double bonds exhibits the highest splice‐switching activity and significantly increases functional protein expression in pLuc/705 reporter cells in vitro and after local administration in vivo. Structural and mechanistic studies reveal that the lipopeptide PMO conjugates form nanoparticles, which accelerate cellular uptake and that the content of unsaturated fatty acids enhances endosomal escape. In an in vitro Duchenne muscular dystrophy exon skipping model using H2K‐mdx52 dystrophic skeletal myotubes, the highly potent PMO conjugates mediate significant splice‐switching at very low nanomolar concentrations. The presented aminoethylene‐lipopeptides are thus a promising platform for the generation of PMO‐therapeutics with a favorable activity/toxicity profile.     

Conversion of waste polystyrene through catalytic degradation into valuable products

Waste expanded polystyrene (EPS) represents a source of valuable chemical products like styrene and other aromatics. The catalytic degradation was carried out in a batch reactor with a mixture of polystyrene (PS) and catalyst at 450 °C for 30 min in case of Mg and at 400 °C for 2 h both for MgO and MgCO₃ catalysts. At optimum degradation conditions, EPS was degraded into 82.20±3.80 wt%, 91.60±0.20 wt% and 81.80±0.53 wt% liquid with Mg, MgO and MgCO₃ catalysts, respectively. The liquid products obtained were separated into different fractions by fractional distillation. The liquid fractions obtained with three catalysts were compared, and characterized using GC-MS. Maximum conversion of EPS into styrene monomer (66.6 wt%) was achieved with Mg catalyst, and an increase in selectivity of compounds was also observed. The major fraction at 145 °C showed the properties of styrene monomer. The results showed that among the catalysts used, Mg was found to be the most effective catalyst for selective conversion into styrene monomer as value added product.     

A contribution to the study of some greek marbles

The use of marble in Architecture began on the 7th century B.C. and continued to be used without stop untill today. Greece and especially the East Macedonia region is an extremely privileged area on marble deposits both in quantities and qualities and colours. In the present work the main physical and engineering properties of some varieties of greek marbles are given and a comparison with the international standards is made. The experimental material (marbles) was from East Macedonia, Argolida-Arcadia and Magnessia, three of the biggest marble deposit areas in Greece. From the results obtained, it is concluded that the marbles examined satisfy all the international standard codes and thus they can be used as building stones and decoration materials.     

Effect on exhaust emissions by the use of methylcyclopentadienyl manganese tricarbonyl (MMT) fuel additive and other lead replacement gasolines

This paper examines the potential effects on car exhaust emissions of a range of alternative lead replacement gasolines in the context of south European countries such as Greece. The main objective of this study was to assess the effects on emissions from non-catalyst passenger vehicles by the substitution of leaded ('super') gasoline with Euro95 unleaded enriched with the additive MMT or other alternative to leaded gasoline fuels. Regulated emissions, two non-regulated pollutants and vehicle performance were measured on two catalyst-equipped and two conventional, non-catalyst vehicles. It was found that there was no measurable effect on regulated emissions (CO, HC and NO(x)) and on fuel consumption by the introduction of the lead replacement fuels for both catalyst and non-catalyst cars. In the case of the non-catalyst car, the shift from leaded to unleaded gasoline was associated with an increase in benzene and formaldehyde emissions, a trend probably attributable to the increased aromatics content of the lead replacement fuels.     

Material requirements for the adoption of unconventional silicon crystal and wafer growth techniques for high‐efficiency solar cells

Silicon wafers comprise approximately 40% of crystalline silicon module cost and represent an area of great technological innovation potential. Paradoxically, unconventional wafer‐growth techniques have thus far failed to displace multicrystalline and Czochralski silicon, despite four decades of innovation. One of the shortcomings of most unconventional materials has been a persistent carrier lifetime deficit in comparison to established wafer technologies, which limits the device efficiency potential. In this perspective article, we review a defect‐management framework that has proven successful in enabling millisecond lifetimes in kerfless and cast materials. Control of dislocations and slowly diffusing metal point defects during growth, coupled to effective control of fast‐diffusing species during cell processing, is critical to enable high cell efficiencies. To accelerate the pace of novel wafer development, we discuss approaches to rapidly evaluate the device efficiency potential of unconventional wafers from injection‐dependent lifetime measurements. Copyright © 2015 John Wiley & Sons, Ltd.     

The BER analysis of OFDMA and SC‐FDMA under pilot‐assisted channel estimation and pilot jamming in rayleigh slow‐fading channel

In this paper, the authors derived the analytical bit error rate expressions for orthogonal frequency division multiple access and single‐carrier frequency‐division multiple access (SC‐FDMA) in Rayleigh slow‐fading channel for binary phase‐shift keying/quadrature phase‐shift keying/16‐quadrature amplitude modulations under pilot jamming and pilot symbol‐assisted channel estimation. Beginning with the bit error rate analysis from the general case of pilot symbol‐assisted channel estimation technique in Rayleigh slow‐fading channel, the expressions are first modified for different modulations and then further customized to account for the Zero‐Forcing equalization in frequency or time direction with application respectively to orthogonal frequency division multiple access or SC‐FDMA without and with pilot jamming. Piecewise‐linear interpolation is used for its simplicity. The simulation results match perfectly with the theoretical predictions except for some discrepancies with SC‐FDMA, which imply that the generalized equations developed here have to be further modified to account for system‐specific features like discrete Fourier transform precoding for SC‐FDMA. Copyright © 2016 John Wiley & Sons, Ltd.     

On the importance of specific interface area in clay nanocomposites of PMMA filled with synthetic nano-mica

In clay nanocomposites, the specific interface area is the key factor determining potential improvements of properties. Nevertheless, in most systematic studies of nanocomposites little emphasis is put on assuring and characterizing dispersion quality. To probe the influence of dispersion quality, we compare nanocomposites filled with two layered silicates which were made by melt compounding and solution blending, respectively. Poly(methyl methacrylate) (PMMA) is chosen here as a thermoplastic model matrix which was compounded with a synthetic nano-mica (O-hect) and commercial Bentone with typical diameters of 5–7 μm and <300 nm, respectively.     

Logic programming to predict cell fate patterns and retrodict genotypes in organogenesis

Caenorhabditis elegans vulval development is a paradigm system for understanding cell differentiation in the process of organogenesis. Through temporal and spatial controls, the fate pattern of six cells is determined by the competition of the LET-23 and the Notch signalling pathways. Modelling cell fate determination in vulval development using state-based models, coupled with formal analysis techniques, has been established as a powerful approach in predicting the outcome of combinations of mutations. However, computing the outcomes of complex and highly concurrent models can become prohibitive. Here, we show how logic programs derived from state machines describing the differentiation of C. elegans vulval precursor cells can increase the speed of prediction by four orders of magnitude relative to previous approaches. Moreover, this increase in speed allows us to infer, or ‘retrodict’, compatible genomes from cell fate patterns. We exploit this technique to predict highly variable cell fate patterns resulting from dig-1 reduced-function mutations and let-23 mosaics. In addition to the new insights offered, we propose our technique as a platform for aiding the design and analysis of experimental data.