Evaluation of direct light processing for the fabrication of bioactive ceramic scaffolds: Effect of pore/strut size on manufacturability and mechanical performance

Bioactive ceramic scaffolds for bone regeneration consisting of a three-dimensional mesh of interpenetrating struts with square section were fabricated via Digital Light Processing (DLP). The ability of the technique to manufacture 3D porous structures from β-tricalcium phosphate (β-TCP) powders with different dimensions of struts and pores was evaluated, identifying the possibilities and limitations of the manufacturing process. Small pore sizes were found to seriously complicate the elimination of excess slurry from the scaffold’s innermost pores. The effect of the strut/pore size on the mechanical performance of the scaffolds under compressive stresses was also evaluated, but no significant influence was found. Under compressive stresses, the structures resulted weaker when tested perpendicularly to the printing plane due to interlayer shear failure. Interlayer superficial grooves are proposed as potential failure-controlling defects, which could also explain the lack of a Weibull size effect on the mechanical strength of the fabricated DLP scaffolds.     

Genetic and Epigenomic Modifiers of Diabetic Neuropathy

Diabetic neuropathy (DN), the most common chronic and progressive complication of diabetes mellitus (DM), strongly affects patients’ quality of life. DN could be present as peripheral, autonomous or, clinically also relevant, uremic neuropathy. The etiopathogenesis of DN is multifactorial, and genetic components play a role both in its occurrence and clinical course. A number of gene polymorphisms in candidate genes have been assessed as susceptibility factors for DN, and most of them are linked to mechanisms such as reactive oxygen species production, neurovascular impairments and modified protein glycosylation, as well as immunomodulation and inflammation. Different epigenomic mechanisms such as DNA methylation, histone modifications and non-coding RNA action have been studied in DN, which also underline the importance of “metabolic memory” in DN appearance and progression. In this review, we summarize most of the relevant data in the field of genetics and epigenomics of DN, hoping they will become significant for diagnosis, therapy and prevention of DN.     

Call admission control schemes: a review

Over the last few years, a substantial number of call admission control (CAC) schemes have been proposed for ATM networks. We review the salient features of some of these algorithms. Also, we quantitatively compare the performance of three of these schemes     

Bayes and classical estimation of environmental factors for thebinomial distribution

An environmental factor converts reliability test results at one environmental condition into equivalent “failure” information at other environments. This paper studies environmental-factor estimation for the binomial distribution. Under general conditions, Bayes point estimates and credibility limits for environmental factors are derived. Classical point and confidence interval estimates are introduced and compared with the Bayes estimators. The characteristics of Bayes and classical estimators for the binomial distribution are summarized through numerical computation and theoretical analysis. A numerical example of reliability assessment by means of environmental factors is presented     

On an evolutionary approach for constrained optimization problem solving

Over the last few decades, many different evolutionary algorithms have been introduced for solving constrained optimization problems. However, due to the variability of problem characteristics, no single algorithm performs consistently over a range of problems. In this paper, instead of introducing another such algorithm, we propose an evolutionary framework that utilizes existing knowledge to make logical changes for better performance. The algorithmic aspects considered here are: the way of using search operators, dealing with feasibility, setting parameters, and refining solutions. The combined impact of such modifications is significant as has been shown by solving two sets of test problems: (i) a set of 24 test problems that were used for the CEC2006 constrained optimization competition and (ii) a second set of 36 test instances introduced for the CEC2010 constrained optimization competition. The results demonstrate that the proposed algorithm shows better performance in comparison to the state-of-the-art algorithms.     

Additive Behavior in Copper Electrorefining

This paper reports on the mode of action of two different organic additives—gelatine and thiourea—during the electrorefining of copper from acid copper sulfate solutions. Gelatine increases the cathode current efficiency and produces smoother deposits up to a certain level of concentration, beyond which, however, these effects are diminished by the steric hinderance of bulky molecular entities adsorbed to the electrode surface. Thiourea decreases the cathode current efficiency when present at concentrations around 5 mg/1. Nonetheless, it improves deposit quality. In higher concentrations, thiourea increases the cathodic current efficiency but also promotes nodule formation and rough deposits. The degradation and/or hydrolysis of both additives and the various interactions with the electrode surface and with cupric ions in solution are also examined.     

Flow of granules through cylindrical hopper

The gravity flow characteristics of pharmaceutically important granules were studied in a cylindrical hopper with attachable orifice disk at the bottom. Results indicate that materials property and orifice diameter play key role in determining mass flow rate while keeping environmental condition (temperature) at fixed range. A new dimensionally analyzed equation was developed to predict gravity flow of pharmaceutically important granules. The developed correlation agreed well with the experimental data. Calcium gluconate and lactose were used for preparing granules. Generally, glidant/lubricant materials are added to pharmaceutical granules during tablet manufacturing process, in order to improve physical property of granular material. Hence, the effect of glidant/lubricant on mass flow of granules through hopper was also studied. Magnesium stearate (1.5%) was added as glidant before granulation.     

Recognizing arabic handwritten characters using deep learning and genetic algorithms

Automated techniques for Arabic content recognition are at a beginning period contrasted with their partners for the Latin and Chinese contents recognition. There is a bulk of handwritten Arabic archives available in libraries, data centers, historical centers, and workplaces. Digitization of these documents facilitates (1) to preserve and transfer the country’s history electronically, (2) to save the physical storage space, (3) to proper handling of the documents, and (4) to enhance the retrieval of information through the Internet and other mediums. Arabic handwritten character recognition (AHCR) systems face several challenges including the unlimited variations in human handwriting and the leakage of large and public databases. In the current study, the segmentation and recognition phases are addressed. The text segmentation challenges and a set of solutions for each challenge are presented. The convolutional neural network (CNN), deep learning approach, is used in the recognition phase. The usage of CNN leads to significant improvements across different machine learning classification algorithms. It facilitates the automatic feature extraction of images. 14 different native CNN architectures are proposed after a set of try-and-error trials. They are trained and tested on the HMBD database that contains 54,115 of the handwritten Arabic characters. Experiments are performed on the native CNN architectures and the best-reported testing accuracy is 91.96%. A transfer learning (TF) and genetic algorithm (GA) approach named “HMB-AHCR-DLGA” is suggested to optimize the training parameters and hyperparameters in the recognition phase. The pre-trained CNN models (VGG16, VGG19, and MobileNetV2) are used in the later approach. Five optimization experiments are performed and the best combinations are reported. The highest reported testing accuracy is 92.88%.

     

Application of Different Frequency Domain Detectors in Radar Moving Target Detection

Moving target detection (MTD) technique is designed to filtering out the clutters. The basis of the MTD digital signal processor is a bank of Doppler filters designed using FFT algorithm. For high pulse repetition frequency (HPRF), it leads to a long time calculations and great complexity in hardware implementation. Frequency domain detector is represented by Welch method Realized Doppler filters bank which will reduce the time calculation. The proposed method enhances the target detection capabilities by p...