Modification of zeolite surfaces by Grignard reagent

New microporous hybrid organic/inorganic materials were obtained by modification of zeolites using chlorination of their surface, followed by treatment with a Grignard reagent. Loading of butyl groups and retained crystallinity of ZSM-5 type zeolites was higher than for zeolites Y. In contrast to zeolites Y, the lattice parameters of zeolites ZSM-5 increased after surface modification. The obtained hybrid materials on the basis of high-silica zeolites possess a high degree of crystallinity at increased hydrophobicity.     

An adaptive color similarity function suitable for image segmentation and its numerical evaluation

In this article, we present an adaptive color similarity function defined in a modified hue‐saturation‐intensity color space, which can be used directly as a metric to obtain pixel‐wise segmentation of color images among other applications. The color information of every pixel is integrated as a unit by an adaptive similarity function thus avoiding color information scattering. As a direct application we present an efficient interactive, supervised color segmentation method with linear complexity respect to the number of pixels of the input image. The process has three steps: (1) Manual selection of few pixels in a sample of the color to be segmented. (2) Automatic generation of the so called color similarity image (CSI), which is a gray level image with all the gray level tonalities associated with the selected color. (3) Automatic threshold of the CSI to obtain the final segmentation. The proposed technique is direct, simple and computationally inexpensive. The evaluation of the efficiency of the color segmentation method is presented showing good performance in all cases of study. A comparative study is made between the behavior of the proposed method and two comparable segmentation techniques in color images using (1) the Euclidean metric of the a* and b* color channels rejecting L* and (2) a probabilistic approach on a* and b* in the CIE L*a*b* color space. Our testing system can be used either to explore the behavior of a similarity function (or metric) in different color spaces or to explore different metrics (or similarity functions) in the same color space. It was obtained from the results that the color parameters a* and b* are not independent of the luminance parameter L* as one might initially assume in the CIE L*a*b* color space. We show that our solution improves the quality of the proposed color segmentation technique and its quick result is significant with respect to other solutions found in the literature. The method also gives a good performance in low chromaticity, gray level and low contrast images. © 2016 Wiley Periodicals, Inc. Col Res Appl, 42, 156–172, 2017     

Annealing of laser patterned PMMA coated with gold and gallium

Poly(methyl methacrylate) (PMMA) surface was patterned by laser scanning and Ga and Au layers of different thicknesses were sputtered onto modified polymer surface. The metal/PMMA structures were annealed at 160 °C for 1 h and the changes in the surface morphology were examined by AFM and STM techniques. It was found that sufficiently thick and continuous metal coverage protect the underlying pattern structure.     

Porphyrin migration and aggregation in a poly(methylmethacrylate) matrix

The aging of thin polymer films is interesting for the development of nonlinear optical media. In this study, the optical properties of porphyrin‐doped poly(methylmethacrylate) (PMMA) films are investigated before and after annealing. Both absorption and luminescence spectroscopies were used to characterize the changes that occurred during the thermal treatment. The surface and bulk characteristics of the doped films were also measured using atomic force microscopy, X‐ray‐induced photoelectron spectra, and DSC. We found that the aging of the thin polymer films led the porphyrin molecules to diffuse in the direction of the polymer surface. This led to the random formation of porphyrin aggregates on the surface, followed by absorption band shift and little luminescence quenching. These results suggest that porphyrin‐doped PMMA films could be used as long‐term stable active optical materials. POLYM. COMPOS., 35:665–670, 2014. © 2013 Society of Plastics Engineers     

Preparation of periodic surface structures on doped poly(methyl metacrylate) films by irradiation with KrF excimer laser

In this work, we describe laser modification of poly(methyl methacrylate) films doped with Fast Red ITR, followed by dopant exclusion from the bulk polymer. By this procedure, the polymer can be modified under extremely mild conditions. Creation of surface ordered structure was observed already after application of 15 pulses and 12 mJ cm⁻² fluence. Formation of grating begins in the hottest places and tends to form concentric semi-circles around them. The mechanism of surface ordered structure formation is attributed to polymer ablation, which is more pronounced in the place of higher light intensity. The smoothness of the underlying substrate plays a key role in the quality of surface ordered structure. Most regular grating structures were obtained on polymer films deposited on atomically ‘flat’ Si substrates. After laser patterning, the dopant was removed from the polymer by soaking the film in methanol.     

Exhaust Cleaning with Dielectric Barrier Discharge

To clean the exhaust emissions as one of the most important tasks in pollution control, a study on the treatment of engine emissions with discharge assistance was reported. A DBD plasma source shaped in grid and cylinder was examined in different engine operational modes to reduce the NOX content of diesel engine exhaust. The composition of the exhaust gases and chemical reactions initiated by the discharge were analyzed. The discharge frequency had a crucial impact on the device’s performance and gas treatment. The voltages applied to the discharge gap could alter the chemical reactions occurring in the treated gases, which were indicated by the NO to NO2 ratio. The operation of the system was studied at frequencies ranging from 400 Hz to 16 kHz.     

Optical properties of PMMA doped with erbium(III) and ytterbium(III) complexes

In this article, we report the fabrication and optical/spectroscopic properties of polymethylmethacrylate (PMMA) doped with rare earth (RE) (Er³⁺ and Er³⁺/Yb³⁺) ions. Infrared spectroscopy revealed only very weak O? H stretching vibration peaks in the samples, which is important if satisfactory photoluminescence is to be observed at 1530 nm. Measurement of transmission spectra in the wavelength ranges from 300 to 700 nm for Er³⁺‐doped samples and from 900 to 1050 nm for Yb³⁺‐doped samples enabled us to observe the ⁴G_11/2 (377 nm) and ²H_11/2 (519 nm) transmission bands typical for Er³⁺‐doped samples, as well as the ²F_5/2 (975 nm) band typical for Yb³⁺‐doped samples. Under excitation at 980 nm, at room temperature, the characteristic Er³⁺ emission at 1530 nm was also observed with improving trend when the higher RE concentrations were applied. The results indicate that the PMMA reveals very low tendency to the RE clustering, which together with low cost and easy fabrication make it a material with a great potential in the active photonics devices. POLYM. ENG. SCI., 2009. © 2009 Society of Plastics Engineers     

Singular and Hypersingular Integral Equations Techniques for Gyrotron Coaxial Resonators with a Corrugated Insert

For the first time rigorous theory is developed for eigen traveling TM modes in the resonator of the coaxial cavity gyrotron with a corrugated insert. This mathematical model can be applied for any corrugation parameters and wavelengths. Gyrotron simulation software is developed and allows to calculate mode eigenvalues, electromagnetic field components and Ohmic losses for eigen TE and TM modes. Results of the numerical investigations are presented for the ITER relevant 170 GHz coaxial cavity gyrotron developed in Forschungszentrum Karlsruhe, Germany.     

Measurement of entrained air-void parameters in Portland cement concrete using micro X-ray computed tomography

The entrained air-void system in concrete is closely related to freeze-thaw durability in concrete pavements or other structures. For either research or forensic purposes, reliable and economical methods for the quantification of entrained air are desirable. This study explores the potential of using micro X-ray computed tomography (μCT) to measure entrained air-void parameters in concrete. A series of small cores (6 mm dia.) were retrieved from larger (100-mm-dia.) cores from two different concrete pavements, representing both adequate and marginal air contents, and scanned at a resolution of 7.5 μm/pixel. A systematic procedure based on image processing is proposed to address practical difficulties such as void/solid thresholding, air-type discernment (entrained air-voids vs. voids in aggregate) and the separation of bubbles within close proximity to each other (e.g. clustered air-voids). Air content and specific surface were measured directly from the three-dimensional (3D) reconstructed X-ray images, while values for paste content were derived from manual point counts performed on two-dimensional (2D) slices obtained from the 3D images. The derived values for air content, specific surface and paste content were used to calculate Powers’ spacing factor. To assess the issue of local fluctuations of material constituents and the limited dimensions of the small cores, uncertainty associated with the sample volume of concrete under measurement was also estimated. Based on the results in this study with regard to the work involved in sample preparation, data analysis and uncertainty bounds, μCT has been found to be a viable option for measurement of spacing factor and specific surface, but due to limitations imposed by the dimensions of the sample size (6-mm-dia. cores), the method is not appropriate for bulk air content determination.