Effects of environmental factors on corrosion behavior of aluminum

Aluminum, used as a material for heat exchangers in air conditioners, often has problems of leakage of refrigerant on the Al surface due to corrosion. The problems originate from pitting corrosion of the Al in an external environment. To understand corrosion problems, it is necessary to study the corrosion behavior of Al in various environments. In this study, the effects of environmental factors on the corrosion behavior of Al were studied by the surface analysis and electrochemical testing in 3.5 wt% NaCl solutions, with changes of dissolved oxygen, temperature, and concentration of Cl⁻ and S ions. Among the external environmental factors, the presence of oxygen and the increase of Cl⁻ ion concentration do not significantly affect the corrosion potential of Al, leading to an increase of only 1.1 and 6 times, respectively. There was a significant decrease in the corrosion resistance of Al, approximately 40 and 800 times, respectively, with the increase of concentration of S and temperature.     

Phase-pure Na3V2(PO4)2F3 embedded in carbon matrix through a facile polyol synthesis as a potential cathode for high performance sodium-ion batteries

In this study, a pseudo-layered Na super-ionic conductor of Na₃V₂(PO₄)₂F₃ (NVPF)/C cathode for sodium-ion batteries is prepared successfully using a facile polyol refluxing process without any impurity phases. The X-ray diffraction and Rietveld refinement results confirm that NVPF possesses tetragonal NASICON-type lattice with a space group of P₄₂/mnm. In this preparative method, polyol is utilized as a solvent as well as a carbon source. The presence of nanosized NVPF particles in the carbon network is confirmed by field-emission scanning electron microscopy (FE-SEM) and high-resolution transmission electron microscopy (HR-TEM). The existence of carbon is analyzed by Raman scattering and elemental analysis. When applied as a Na-storage material in a potential window of 2.0–4.3 V, the electrode exhibits two flat voltage plateaus at 3.7 and 4.2 V with an electrochemically active V³⁺/V⁴⁺ redox couple. In addition, Na₃V₂(PO₄)₂F₃/C composite achieved a retention capacity of ~ 88% even after 1,500 cycles at 15 C. Moreover, at high current densities of 30 and 50 C, Na₃V₂(PO₄)₂F₃/C cathode retains the specific discharge capacities of 108.4 and 105.9 mAh·g^–1, respectively, revealing the structural stability of the material prepared through a facile polyol refluxing method.

     

Influence of iron doping towards the physicochemical and biological characteristics of hydroxyapatite

Hydroxyapatite (HAP) is the naturally occurring mineral form of calcium apatite and the most studied material as a bone substituent. Considering HAP's inherent properties, this study explored changes in HAP's characteristics from doping with other metals such as Fe. To form pure HAP and Fe-HAP with different amounts of Fe, we used the hydrothermal approach, and the composites that formed were thoroughly analyzed for their crystallinity, surface bonding, morphology, magnetic behavior, mechanical strength, biocompatibility, hemocompatibility, and in vitro cytotoxicity. The powder XRD studies confirmed the samples' crystallinity, and the lowest crystalline size was 19.7 nm in 10Fe-HAP. The FTIR analysis confirmed the formation of HAP by the hydroxyl, phosphate, and carbonate groups. The FESEM demonstrated that the morphology of the pure HAP was rod-shaped, which transformed into spheres after Fe doping. The EDS analysis confirmed the successful formation of HAP and Fe-HAP composites. The magnetic studies indicated the diamagnetic behavior of the pure HAP, while the Fe-doped HAPs had a superparamagnetic nature with saturation magnetizations (M_s) of 2Fe-HAP, 4Fe-HAP, and 10Fe-HAP at 0.0062, 0.0092, and 0.029 emu/g respectively. Assessment of the mechanical properties, biocompatibility, hemocompatibility, and cytotoxicity indicated that the Fe-doped HAPs were superior to the pure HAP, and among the Fe-HAPs, the 10Fe-HAP) had the highest amount of Fe and the best characteristics. The studies also indicated that Ca²⁺ interactions influenced the cells via HAP doping with that of Fe, equally increasing the physicochemical and biological properties.     

Environmental Enrichment Enhances Cav 2.1 Channel-Mediated Presynaptic Plasticity in Hypoxic–Ischemic Encephalopathy

Hypoxic–ischemic encephalopathy (HIE) is a devastating neonatal brain condition caused by lack of oxygen and limited blood flow. Environmental enrichment (EE) is a classic paradigm with a complex stimulation of physical, cognitive, and social components. EE can exert neuroplasticity and neuroprotective effects in immature brains. However, the exact mechanism of EE on the chronic condition of HIE remains unclear. HIE was induced by a permanent ligation of the right carotid artery, followed by an 8% O₂ hypoxic condition for 1 h. At 6 weeks of age, HIE mice were randomly assigned to either standard cages or EE cages. In the behavioral assessments, EE mice showed significantly improved motor performances in rotarod tests, ladder walking tests, and hanging wire tests, compared with HIE control mice. EE mice also significantly enhanced cognitive performances in Y-maze tests. Particularly, EE mice showed a significant increase in Ca_v 2.1 (P/Q type) and presynaptic proteins by molecular assessments, and a significant increase of Ca_v 2.1 in histological assessments of the cerebral cortex and hippocampus. These results indicate that EE can upregulate the expression of the Ca_v 2.1 channel and presynaptic proteins related to the synaptic vesicle cycle and neurotransmitter release, which may be responsible for motor and cognitive improvements in HIE.     

Tactile colour pictogram to improve artwork appreciation of people with visual impairments

A recent development in tactile technology enables an improvement in the appreciation of the visual arts for people with visual impairment (PVI). The tactile sense, in conjunction with, or a possibly as an alternative to, the auditory sense, would allow PVIs to approach artwork in a more self‐driven and engaging way that would be difficult to achieve with just an auditory stimulus. Tactile colour pictograms (TCPs), which are raised geometric patterns, are ideographic characters that are designed to enable PVIs to identify colours and interpret information by touch. In this article, three TCPs are introduced to code colours in the Munsell colour system. Each colour pattern consists of a basic cell size of 10 mm × 10 mm to represent the patterns consistently in terms of regular shape. Each TCP consists of basic geometric patterns that are combined to create primary, secondary, and tertiary colour pictograms of shapes indicating colour hue, intensity and lightness. Each TCP represents 29 colours including six hues; they were then further expanded to represent 53 colours. Two of them did not increase the cell size, the other increased the cell size 1.5 times for some colours, such as yellow‐orange, yellow, blue, and blue‐purple. Our proposed TCPs use a slightly larger cell size compared to most tactile patterns currently used to indicate colour, but code for more colours. With user experience and identification tests, conducted with 23 visually impaired adults, the effectiveness of the TCPs suggests that they were helpful for the participants.     

Aqueous dispersion of 1D van der Waals Mo6S3I6 crystal using biocompatible tri-block copolymer

To achieve the stable dispersion of 1D van der Waals crystal Mo₆S₃I₆ in aqueous media, the tri-block copolymer (Poloxamer) is used as dispersant. The head group of Poloxamer, hydrophobic polypropylene oxide parts can be adsorbed to Mo₆S₃I₆ surface by hydrophobic interaction and the tail group with hydrophilic polyethylene oxide exposed to the outside of the Mo₆S₃I₆ is soluble in water and can form sufficient steric hindrance, resulting in stable aqueous dispersion in nm scale. The excellent biocompatibility of aqueous dispersed nm scale 1D Mo₆S₃I₆ was demonstrated by effective proliferation of C2C12 cells.     

Antibacterial activities of polyphenols against foodborne pathogens and their application as antibacterial agents

Food Science and Biotechnology - Polyphenols are secondary metabolites produced in higher plants. They are known to possess various functional properties in the human body. Polyphenols also exhibit...     

Classification of geographical origin of kimchi by volatile compounds analysis using an electronic nose

Food Science and Biotechnology - Food authenticity is one of the largest concerns in recent days. As kimchi has been a global food, its production origin has been important issue, particularly due...