Chemical reaction kinetics dataset of Cs-I-B-Mo-O-H system for evaluation of fission product chemistry under LWR severe accident conditions

In order to improve LWR source term under severe accident conditions, the first version of a fission product chemistry database named ‘ECUME’ was developed. The ECUME is intended to include several datasets of major chemical reactions and their effective kinetic constants for representative severe accident sequences. It is expected that the ECUME can serve as a fundamental basis from which fission product chemical models can be elaborated for use in the severe accident analysis codes. The implemented chemical reactions in the first version were those for representative gas species in Cs-I-B-Mo-O-H system from 300 to 3000 K. The chemical reaction kinetic constants were evaluated from either literature data or calculated values using ab-initio calculations. The sample chemical reaction calculation using the presently constructed dataset showed meaningful kinetics effects at 1000 K. Comparison of the chemical equilibrium compositions by using the dataset with those by chemical equilibrium calculations has shown rather good consistency for the representative Cs-I-B-Mo-O-H species. From these results, it was concluded that the present dataset should be useful to evaluate fission product chemistry in Cs-I-B-Mo-O-H system under LWR severe accident conditions, where kinetics effects should be considered.     

Contribution of metal vapor mass at periphery part of pulsed arc to electromagnetic force in weld pool

The arc welding has been used in various welding methods because it is inexpensive and high in strength after welding. However, it is a problem that accidents such as collapse of the bridge occur because of the welding defects. The welding of low cost and high productivity is required without the welding defects. The pulsed TIG welding is inexpensive and capable of high‐quality welding. The electromagnetic force contributing to penetration changes because the transient response of arc temperature and iron vapor generated from anode occurs. However, the analysis of pulsed TIG welding with metal vapor has been elucidated only metal vapor concentration near anode with transient phenomenon and heat flux. Thus, the theoretical elucidation of penetration depth with control factor has not been researched. In this paper, the contribution of metal vapor mass at the periphery part of pulsed arc to the electromagnetic force in the weld pool is elucidated. As a result, the iron vapor mass at periphery part decreased with increasing the frequency. The iron vapor was stagnated at axial center within one cycle. The electromagnetic force to the penetration depth direction in weld pool increased at axial center. Therefore, the metal vapor mass at periphery part plays an important role for the electromagnetic force increment at axial center.     

以辉锑矿为原料放电等离子烧结快速制备黝铜矿Cu_(12)Sb_4S_(13)及反应机理

采用辉锑矿为原料成功制备出Cu_(12)Sb_4S_(13)块体。研究以Sb_2S_3矿物为原料时烧结工艺对Cu_(12)Sb_4S_(13)合成的影响。在400 ～ 440℃温度区间内均可快速合成Cu_(12)Sb_4S_(13)块体且二次烧结能够进一步减小中间相CuSbS_2和Cu_3SbS_3。第二相Cu_3SbS_4和残留相CuS随着烧结时间的延长而降低。二次烧结前进行机械化球磨处理,干磨比湿磨更容易减小残留相。初次烧结块体的断面SEM和EDS能谱分析表明内部存在Cu或Cu_2S颗粒团聚现象。适当降低Cu或CuS摩尔量(化学计量比0.1 mol)能促进烧结块表面反应进行。烧结过程中,硫磺蒸汽压的导致烧结块表面成分和内部粉末的成分不同。     

Effects of phosphorus content on generation and growth of cracks in nickel–phosphorus platings owing to thermal cycling

We observed crack generation and structural changes in electroless nickel–phosphorus (Ni–P) plating layers formed on copper-metalized silicon nitride substrates both during thermal cycling from ? 40 to 250 °C and during storage (not cycling) at 250 °C in order to investigate the effect of the phosphorus contents on crack generation and growth in the Ni–P platings. The used platings contained phosphorus at three different contents: 2.1 wt% [Ni–P(low)], 6.5 wt% [Ni–P(med)], and 10.9 wt% [Ni–P(high)]. The generation time and the amount of cracks were strongly dependent on their phosphorus contents. More cracks appeared after thermal cycling than after storage at 250 °C. In Ni–P(low), cracks were generated after 200 thermal cycles, whereas no cracks were observed even after 250 h of storage at 250 °C. In Ni–P(med) and Ni–P(high), both during thermal cycling and storage at 250 °C, cracks formed during or after crystallization of the amorphous layers. These results suggest that the primary factors affecting the generation of cracks in electroless Ni–P platings are crystallization of the Ni–P platings and repeated changes in thermal stress.     

Evaluation of effects of windows installed with near-infrared rays retro-reflective film on thermal environment in outdoor spaces using CFD analysis coupled with radiant computation

Recently, windows with low-e double-glazing or heat-shading films often have been installed to the exterior surfaces of buildings to reduce the cooling load of the buildings. These windows specularly reflect solar radiation into pedestrian spaces. It has been pointed out that the increase in the incident solar radiation reflected at the windows degrades the thermal comfort levels of pedestrians. The installation of near-infrared rays retro-reflective film to window surfaces may both reduce the cooling load of the building and reduce the impacts on the thermal environment in outdoor spaces. Hence, it is expected that the installation of this film will counteract this problem and have positive effects. To assess the feasibility of installing retro-reflective materials to the exterior surfaces of the building walls and ground forming part of a city block, for improving the thermal environment in outdoor spaces, computational methods could serve as a powerful tool for analyzing the radiant environment in urban and building spaces. In this paper, a computational method is outlined for considering the directional reflections from the exterior surfaces of building walls and windows. The method is used to estimate the effects on the outdoor thermal comfort of pedestrians in the summer season.     

Anisotropic structure of alkali metaphosphate glasses

Orientation anisotropy, which is well known in organic polymers with appropriate network structures, is less common in oxide glasses. We present the intermediate-range order in anisotropic alkali metaphosphate glass which consists of oriented PO₄ tetrahedral chains and intervening alkali cations along the elongation direction. The X-ray total structure factor S(Q) indicates that the inter-chain spacing depends on the size of alkali cations and varies from 5.03 to 6.28 Å. The mixed alkali effect is primarily related to an increase of the separation. The total correlation function T(r) provides the first definite evidence that the anisotropic structure is composed of phosphorus-bridging oxygen bonds (P–O_B) lying along the elongation direction and phosphorus-non-bridging oxygen bonds (P–O_T) oriented perpendicular to the elongation direction. The present result unveils fundamental aspects of the anisotropic structure of an oxide glass and provides essential information for the development of oxide glasses to control structural anisotropy.     

Tunnelling through an embankment using all ground fasten method

The Tohoku Shinkansen Railway between Morioka and Hachinoe was opened on December 1, 2002. In this section, there are 20 tunnels. Second Itsukaichi tunnel is one of them, and it is a relatively short tunnel of 1175 m. At the Morioka portal, this tunnel crosses under National Highway No. 4 with a small depth of overburden 2–5 m where approximately 15,000 vehicles pass a day. The tunnel was excavated by NATM method. All Ground Fasten method was used as an auxiliary method. As a result, the face was prevented from collapsing and the tunnel was excavated while keeping the ground surface settlement to a minimum without interfering with road traffic.     

Thermal and optical properties of hyperbranched fluorinated polyimide/mesoporous SiO2 nanocomposites exhibiting high transparency and reduced thermo-optical coefficients

A series of hyper-branched polyimide (HBPI)/mesoporous SiO₂ nanocomposite films were prepared from a fluorinated anhydride (6FDA), a fluorinated triamine (TFAPOB), and mesoporous SiO₂ nanoparticles (NPs). The anhydride-terminated precursor of HBPI was functionalized using a coupling agent prior to mixing with SiO₂ NPs. The morphologies and thermal-optical properties of the nanocomposite films were investigated, with particular focus on their optical transparency, refractive indices (n), and thermo-optical (TO) coefficients. The absolute values of TO coefficients (|dn/dT|) of HBPI film (50.8 ppm/K) were significantly reduced to 13.4 ppm/K by homogeneous dispersion of 15 wt% of SiO₂ NPs. The HBPI/SiO₂ composite films exhibited high thermal stability without significant weight loss of up to 400 °C in air. The films also exhibited small coefficients of linear thermal expansion (CTEs) within the range 30–40 ppm/K. In addition, enhanced interfacial interactions between SiO₂ and HBPI significantly improve the optical transparency with cutoff wavelengths shorter than 450 nm. The refractive indices of HBPI/SiO₂ composite films were found to range from 1.477 to 1.502, which agrees well with the calculated values. This study shows that the incorporation of SiO₂ NPs in multi-functional HBPI matrix is a promising approach to prepare high performance thermally stable films for thermo-optic applications.