Re-evaluation of Radiation-Energy Transfer to an Extraction Solvent in a Minor-Actinide-Separation Process Based on Consideration of Radiation Permeability

ABSTRACT

Absorbed-dose estimation is essential for evaluation of the radiation tolerance of minor-actinide-separation processes. We propose a dose-evaluation method based on radiation permeability, with comparisons of heterogeneous structures seen in the solvent-extraction process, such as emulsions forming in the mixture of the organic and aqueous phases. A demonstration of radiation-energy-transfer simulation is performed with a focus on the minor-actinide-recovery process from high-level liquid waste with the aid of the Monte Carlo radiation-transport code PHITS. The simulation results indicate that the dose absorbed by the extraction solvent from alpha radiation depends upon the emulsion structure, and that from beta and gamma radiation depends upon the mixer-settler-apparatus size. Non-negligible contributions of well-permeable gamma rays were indicated in terms of the plant operation of the minor-actinide-separation process.     

An efficient manufacturing method for I-shaped cross-sectional CFRP beam with arbitrary arrangement of carbon fiber using electro-activated resin molding

Abstract

The I-shaped cross-sectional beam of CFRP (CFRP I-beam) is usually manufactured by the continuous protrusion method. Carbon fibers can only be arranged in the longitudinal direction. The CFRP I-beam with arbitrary arrangement of carbon fiber was manufactured with applying the electro-activated deposition molding method. The carbon fiber fabric was immersed in the deposition solution and energized, epoxy resin precipitated around carbon fiber and impregnated. The resin-impregnated fabric was installed to the mold, and the CFRP I-beam was fabricated. The CFRP I-beam was subjected to three-point bending tests, and the relationship between load-deflection was simulated by finite-element analysis.     

Direct Growth of Germanene at Interfaces between Van der Waals Materials and Ag(111)

Germanene, a 2D honeycomb germanium crystal, is grown at graphene/Ag(111) and hexagonal boron nitride (h-BN)/Ag(111) interfaces by segregating germanium atoms. A simple annealing process in N₂ or H₂/Ar at ambient pressure leads to the formation of germanene, indicating that an ultrahigh-vacuum condition is not necessary. The grown germanene is stable in air and uniform over the entire area covered with a van der Waals (vdW) material. As an important finding, it is necessary to use a vdW material as a cap layer for the present germanene growth method since the use of an Al₂O₃ cap layer results in no germanene formation. The present study also proves that Raman spectroscopy in air is a powerful tool for characterizing germanene at the interfaces, which is concluded by multiple analyses including first-principles density functional theory calculations. The direct growth of h-BN-capped germanene on Ag(111), which is demonstrated in the present study, is considered to be a promising technique for the fabrication of future germanene-based electronic devices.     

Interface control for resolved CFD-DEM with capillary interactions

In this work, a resolved CFD–DEM coupling model for the simulation of gas-liquid-solid flows is developed: the interface capturing method based on the colour function is employed for fluids (i.e. a gas and liquid) whilst Discrete Element Method (DEM) is used for particles. The Volume Penalisation (VP) method is adopted to consider the hydrodynamic interactions between fluids and particles along with the Immersed Free Surface (IFS) method, which artificially extends the gas-liquid interface into the interior of the particle to account for the wettability. The unique point of the proposed model is that the thickness of the gas-liquid interface can be controlled by using both interface compression and diffuse interface techniques simultaneously. From the simulation results, it is presented that the accurate evaluation of the surface tension force as well as the capillary force can be achieved by appropriately controlling the interface thickness. Moreover, the major two methods in the literature to calculate the capillary force are compared in this work. The validity of the proposed model is presented for both static and dynamic cases. The behaviour of two colliding particles with a dynamic liquid bridge is then simulated to demonstrate the applicability of the proposed model to a complex three-phase system.     

Mercury contamination in the Yatsushiro Sea, south-western Japan: spatial variations of mercury in sediment

Mercury-contaminated effluent was discharged into Minamata Bay from a chemical plant over a 20-year period until 1965 (from 1958 to 1959, effluent was discharged into Minamata River), causing Minamata disease. In an effort to characterize the extent of the contamination in the Yatsushiro Sea, the vertical and horizontal distributions of mercury in sediment were investigated. Sediment was sampled at 62 locations in the southern part of the sea from 4 to 6 March 1996. In the lower layers of the long cores of sediment, the total amount of mercury was at a relatively uniform low concentration. We interpret these low values to represent the background concentration absent of anthropogenic influence. The background value thus estimated for the Yatsushiro Sea was 0.059 +/- 0.013 mg kg(-1) (mean +/- S.D., n = 51). The highest concentration in each sample ranged from 0.086 to 3.46 mg kg(-1) (mean, 0.57 mg kg(-1)). The higher values were obtained at stations near Minamata Bay and the Minamata River (the sources of the pollution). Concentrations decreased with distance from the source. An inspection of the vertical profiles of mercury concentration in cores suggested that the deposited mercury had not been fixed in sediment but had been transported, despite 30 years having past since the last discharge of contaminated effluent. At nine stations, extractable inorganic and organic mercury concentrations were determined differentially. Inorganic mercury is the predominant species in sediment and organic mercury comprising approximately 1% of the total.     

Methylcyclohexane dehydrogenation for hydrogen production via a bimodal catalytic membrane reactor

The dehydrogenation of methylcyclohexane (MCH) to toluene (TOL) for hydrogen production was theoretically and experimentally investigated in a bimodal catalytic membrane reactor (CMR), that combined Pt/Al₂O₃ catalysts with a hydrogen‐selective organosilica membrane prepared via sol‐gel processing using bis(triethoxysilyl) ethane (BTESE). Effects of operating conditions on the membrane reactor performance were systematically investigated, and the experimental results were in good agreement with those calculated by a simulation model with a fitted catalyst loading. With H₂ extraction from the reaction stream to the permeate stream, MCH conversion at 250°C was significantly increased beyond the equilibrium conversion of 0.44–0.86. Because of the high H₂ selectivity and permeance of BTESE‐derived membranes, a H₂ flow with purity higher than 99.8% was obtained in the permeate stream, and the H₂ recovery ratio reached 0.99 in a pressurized reactor. A system that combined the CMR with a fixed‐bed prereactor was proposed for MCH dehydrogenation. © 2015 American Institute of Chemical Engineers AIChE J, 61: 1628–1638, 2015     

Water vapor solubility of poly(lactic acid) films modified the surface by vacuum ultraviolet irradiation

Surface modification of poly(lactic acid) (PLA) film is performed via 172 nm excimer lamp irradiation. Effects on water vapor solubility and physical properties via vacuum ultraviolet (VUV) irradiation are studied systematically. After VUV irradiation, water vapor solubility increases approximately 11–43% in the low‐pressure region and approximately 20–38% in the high‐pressure region as surface hydrophilicity increased. The increase is attributed to hydrogen bonding with the carboxyl groups because of VUV radiation. The modified layer is significantly swelling after water vapor sorption. The hydrophilic layer forms a thickness of 2–3 μm from the irradiated surface via VUV radiation, but no changes are observed inside the irradiated film. Therefore, PLA film solubility after irradiation is enhanced by hydrophilicity and the swelling effect of the surface. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42200.     

Absolute Configuration of β- and α-Asymmetric Carbons within β-O-4-Structures in Hardwood Lignin

In this study, we investigated the proportion of erythro- and threo-forms of β-O-4-ether structures and their enantiomeric compositions in hardwood lignin by applying the ozonation method to birch wood meal. Optical activity was not substantially observed in either the erythronic or threonic acids obtained as the ozonation products of β-O-4-structures in birch wood meal. The proportions of the four stereoisomeric forms {(αS,βR)-erythro, (αR,βR)-threo, (αS,βS)-threo, and (αR,βS)-erythro forms} were estimated to be 37-38%, 13-14%, 12-13%, and 36-37% based on the yields of erythronic and threonic acids, and on their optical activities. The proportions suggest that the entire components of β-O-4-ether structures in birch wood lignin have R- and S-configurations at the β-carbon in approximately the same quantities {(βR)-β-O-4-structure: (βS)-β-O-4-structure = 50–52:48–50}; i.e., that the β-ether structures are essentially racemic. This estimation implies that, during lignin biosynthesis, an equal number of enantiomeric forms of β-O-4-bonded quinone methides were formed by radical coupling reactions.     

Modeling of quantitative relationships between physicochemical properties of active pharmaceutical ingredients and tensile strength of tablets using a boosted tree

Objectives: The aim of this study was to explore the potential of boosted tree (BT) to develop a correlation model between active pharmaceutical ingredient (API) characteristics and a tensile strength (TS) of tablets as critical quality attributes.

Methods: First, we evaluated 81 kinds of API characteristics, such as particle size distribution, bulk density, tapped density, Hausner ratio, moisture content, elastic recovery, molecular weight, and partition coefficient. Next, we prepared tablets containing 50% API, 49% microcrystalline cellulose, and 1% magnesium stearate using direct compression at 6, 8, and 10?kN, and measured TS. Then, we applied BT to our dataset to develop a correlation model. Finally, the constructed BT model was validated using k-fold cross-validation.

Results: Results showed that the BT model achieved high-performance statistics, whereas multiple regression analysis resulted in poor estimations. Sensitivity analysis of the BT model revealed that diameter of powder particles at the 10th percentile of the cumulative percentage size distribution was the most crucial factor for TS. In addition, the influences of moisture content, partition coefficients, and modal diameter were appreciably meaningful factors.

Conclusions: This study demonstrates that BT model could provide comprehensive understanding of the latent structure underlying APIs and TS of tablets.     

Dimeric C34 Derivatives Linked through Disulfide Bridges as New HIV-1 Fusion Inhibitors

C34, a 34-mer fragment peptide, is contained in the HIV-1 envelope protein gp41. A dimeric derivative of C34 linked through a disulfide bridge at its C terminus was synthesized and found to display potent anti-HIV activity, comparable with that of a previously reported PEGylated dimer of C34REG. The reduction in the size of the linker moiety for dimerization was thus successful, and this result might shed some light on the mechanism of the suppression of six-helix bundle formation by these C34 dimeric derivatives. Addition of a Gly-Cys(CH₂CONH₂)-Gly-Gly motif at the N-terminal position of a C34 monomeric derivative significantly increased the anti-HIV-1 activity. This moiety functions as a new pharmacophore, and this might provide a useful insight into the design of potent HIV-1 fusion inhibitors.