异种铁素体耐热钢接头界面组织及其影响

综述了铁素体与铁素体异种金属焊缝（dissimilar metal welds，DMWs）接头界面组织及其影响。结果表明，在焊后热处理或运行温度下的铁素体钢DMWs接头的不均匀界面组织中，通常会形成脱碳层和增碳层。在铁素体钢DMWs焊接接头界面组织影响因素中，焊缝金属的化学成分有重要影响；焊后热处理规范（温度和时间）、工作温度下运行时间的影响较为突出；焊接工艺参数的影响亦不可忽略。异种钢接头界面处近缝区裂纹的产生，以及接头的蠕变强度随Larson Miller 参数增大而下降等不利影响，均为异种钢界面碳迁移行为所导致。焊缝成分控制法是接头界面组织控制或改善的必要条件，而脱碳层部位转移法能有效防止裂纹发生，亦是接头安全运行的重要工艺措施之一。     

缺水传感器改进设计

针对一种煤矿用本安型缺水传感器在现场安装及维护难度大,以及抽采泵供水状态下管道内有水但传感器检测显示为无水,或抽采泵停止工作时传感器检测显示有水问题,分析原产品中磁体及探头感应装置结构。改进其结构形式,并优化安装,使检测稳定可靠。实现抽采泵管道用缺水传感器的可靠性设计和轻量化设计。     

JCOGIN: a programming framework for particle transport on combinatorial geometry

The Journal of Supercomputing - Domain-specific programming frameworks are usually effective to simplify the development of large-scale applications on supercomputers. This paper introduces a...     

A Comprehensive Review of Genetically Engineered Mouse Models for Prader-Willi Syndrome Research

Prader-Willi syndrome (PWS) is a neurogenetic multifactorial disorder caused by the deletion or inactivation of paternally imprinted genes on human chromosome 15q11-q13. The affected homologous locus is on mouse chromosome 7C. The positional conservation and organization of genes including the imprinting pattern between mice and men implies similar physiological functions of this locus. Therefore, considerable efforts to recreate the pathogenesis of PWS have been accomplished in mouse models. We provide a summary of different mouse models that were generated for the analysis of PWS and discuss their impact on our current understanding of corresponding genes, their putative functions and the pathogenesis of PWS. Murine models of PWS unveiled the contribution of each affected gene to this multi-facetted disease, and also enabled the establishment of the minimal critical genomic region (PWScr) responsible for core symptoms, highlighting the importance of non-protein coding genes in the PWS locus. Although the underlying disease-causing mechanisms of PWS remain widely unresolved and existing mouse models do not fully capture the entire spectrum of the human PWS disorder, continuous improvements of genetically engineered mouse models have proven to be very powerful and valuable tools in PWS research.     

Synthesis of Ionic Ultramicroporous Polymers for Selective Separation of Acetylene from Ethylene

The design of highly stable and efficient porous materials is essential for developing breakthrough hydrocarbon separation methods based on physisorption to replace currently used energy-intensive distillation/absorption technologies. Efforts to develop advanced porous materials such as zeolites, coordination frameworks, and organic polymers have met with limited success. Here, a new class of ionic ultramicroporous polymers (IUPs) with high-density inorganic anions and narrowly distributed ultramicroporosity is reported, which are synthesized by a facile free-radical polymerization using branched and amphiphilic ionic compounds as reactive monomers. A covalent and ionic dual-crosslinking strategy is proposed to manipulate the pore structure of amorphous polymers at the ultramicroporous scale. The IUPs exhibit exceptional selectivity (286.1–474.4) for separating acetylene from ethylene along with high thermal and water stability, collaboratively demonstrated by gas adsorption isotherms and experimental breakthrough curves. Modeling studies unveil the specific binding sites for acetylene capture as well as the interconnected ultramicroporosity for size sieving. The porosity-engineering protocol used in this work can also be extended to the design of other ultramicroporous materials for the challenging separation of other key gas constituents.     

In-situ preparation of cross-linked hybrid anion exchange membrane of quaternized poly (styrene-b-isobutylene-b-styrene) covalently bonded with graphene

Introducing graphene into polymer matrix is an effective way to enhance performances of anion exchange membrane (AEM). However, utilizing the advantages of graphene by physical approach is limited due to the weak interface interaction between graphene and polymer matrix. Herein, we report an effective strategy to covalently bond graphene with polymer matrix to improve the interface interaction and further to improve the properties of AEM. A series of cross-linked quaternized graphene-based hybrid AEM were fabricated by covalently bonding poly (vinylbenzyl chloride) grafted graphene (GN-g-PVBC) copolymer with chloromethyl functionalized poly (styrene-b-isobutylene-b-styrene) (SIBS) through the cross-linker (N,N,N′,N′-tetramethyl-1,6-hexanediamine) by in-situ synthetic approach. The interface interaction between graphene and QSIBS is greatly enhanced according to micromorphology characterization of the hybrid membrane. The cross-linked quaternized hybrid AEM containing 0.55 wt% of GN-g-PVBC exhibits obviously improved dynamical mechanical properties (storage modulus: 418 MPa), ion conductivity (1.81 × 10² S cm^?1), methanol barrier property (5.19 × 10^?7 cm² s^?1), selectivity (3.49 × 10⁴ S s cm^?3) at 60 °C and especially a comparably excellent chemical stability to that of Nafion 115 due to the enhanced interface interaction between graphene and the polymer matrix.     

机械结构分层优化技术研究进展

复杂机械结构优化设计一般表现为多目标、多约束、多参数的优化问题,所以复杂结构优化设计过程通常存在计算复杂、不易收敛等困难。分层优化技术是复杂结构优化设计的一种有效途径,通过将优化问题中复杂的约束、设计变量以及功能目标合理分解为若干子层问题进行求解,然后通过协调得到复杂机械结构整体优化问题的结果。文章对机械结构分层优化技术的理论、应用研究现状进行了总结并探讨了其关键技术环节及发展趋势。     

Distributed biological computation: from oscillators,logic gates and switches to a multicellular processor and neural computing applications

Neural Computing and Applications - Ever since its foundational years, synthetic biology has been focused on the implementation of biological computing structures. In the beginning, engineered...