Influence of Titanium Excess in a Ti–Si Reaction Mixture on the Synthesis of a Composite in a Combustion Wave

Theoretical Foundations of Chemical Engineering - On the basis of the classic concepts of the theory of solid-phase combustion, for the first time, a model with a detailed scheme of chemical...     

Structure and Certain Properties of Hot-Pressed Boron Carbide-Based Ceramic with Calcium-Silicon Additive

The influence which the composition of powder mixtures, the treatment conditions which the mixtures are subjected to, and the conditions under which the hot-pressed composite materials B₄C – (5-10 mass%) calcium-silicon are fabricated exert on the structure, nature of failure, and mechanical properties of these materials is investigated. Optimum properties are possessed by material containing 10 mass% of addition. It is shown that the structure, morphology, and dispersivity, as well as the nature of the distribution of the components that are added to the composite material (secondary phase) vary as the temperature of hot pressing changes. Maximal mechanical characteristics of the composite material (σ_bend = 560 MPa, K _1c = 4.7 MPa·m^1/2, HV = 37 GPa) are attained at hot-pressing temperatures in the range 2000-2100°C.     

Forecasting Capillary Characteristics for Aluminum Nitride Ceramic ― Liquid Metal Systems

A test has been devised that allows one to determine the work of adhesion and wettability in a system composed of aluminum nitride ceramics with a liquid metal without the need for experimental examination. A correlation is examined between the work of adhesion on the one hand and that criteria or others on the other that have been proposed by various researchers. Forecasts are made for the work of adhesion and wetting angle for a series of metals that have not been examined previously. An experimental check has been made on the forecast adhesion activity for some elements.     

Modelling of Al2O3 Powder Compaction with Hot Pressing in a Rigid Die

Computer modelling of hot pressing is provided. Kinetics are described for compaction during hot pressing in a rigid die, and the change in density distribution, irreversible solid phase strain accumulation, and equivalent stresses are studied by means of the finite element method. Shrinkage during the preparation of complex-shaped articles by hot pressing pure Al₂O₃ powder in a graphite die without a protective atmosphere and the physicomechanical properties of the finished article are studied. Calculated and experimental results agree satisfactorily.     

Oxidation of methane in a wide range of pressures and effect of inert gases

The analysis of methane oxidation in a wide range of pressures (0.05–10 atm) demonstrates that the efficiency of CH₃ radicals recombination is of great importance for high selectivity of C₂ hydrocarbons formation. The relative efficiency of different “colliders” assisting the stabilization of exited C₂H*₆ molecules increases in the series: solid surface> Ar> He. The increase of the overall reaction rate upon increasing pressure of the inert gases in the case of catalysts having a higher surface area and more developed pore structure is likely due to the contribution of the surface-induced chain reaction in the volume of pores.     

Molecular Mechanisms of the Deregulation of Muscle Contraction Induced by the R90P Mutation in Tpm3.12 and the Weakening of This Effect by BDM and W7

Point mutations in the genes encoding the skeletal muscle isoforms of tropomyosin can cause a range of muscle diseases. The amino acid substitution of Arg for Pro residue in the 90th position (R90P) in γ-tropomyosin (Tpm3.12) is associated with congenital fiber type disproportion and muscle weakness. The molecular mechanisms underlying muscle dysfunction in this disease remain unclear. Here, we observed that this mutation causes an abnormally high Ca²⁺-sensitivity of myofilaments in vitro and in muscle fibers. To determine the critical conformational changes that myosin, actin, and tropomyosin undergo during the ATPase cycle and the alterations in these changes caused by R90P replacement in Tpm3.12, we used polarized fluorimetry. It was shown that the R90P mutation inhibits the ability of tropomyosin to shift towards the outer domains of actin, which is accompanied by the almost complete depression of troponin’s ability to switch actin monomers off and to reduce the amount of the myosin heads weakly bound to F-actin at a low Ca²⁺. These changes in the behavior of tropomyosin and the troponin–tropomyosin complex, as well as in the balance of strongly and weakly bound myosin heads in the ATPase cycle may underlie the occurrence of both abnormally high Ca²⁺-sensitivity and muscle weakness. BDM, an inhibitor of myosin ATPase activity, and W7, a troponin C antagonist, restore the ability of tropomyosin for Ca²⁺-dependent movement and the ability of the troponin–tropomyosin complex to switch actin monomers off, demonstrating a weakening of the damaging effect of the R90P mutation on muscle contractility.     

Hydrotreating processes for catalytic abatement of water pollutants

Opportunities and problems in application of catalytic hydrotreating processes, which are presented a viable approach in the abatement of water pollutants, are discussed. Analysis of the hydrodechlorination (HDC) and hydrodenitrification (HDN) using Pd-based catalysts supported on various materials like granulated activated carbon (GAC), fibrous activated carbon cloths (ACCs) or glass fiber cloths (GFCs) studied recently in our laboratory suggests the following perspectives:

Exhaustive regeneration of Pd/GAC saturated with p-chlorophenol can be achieved in a two-step approach, incorporating gas-phase HDC by hydrogen followed by oxidation by air.

Pd/ACC catalysts are good candidates for the liquid-phase HDC showing activity higher than that of Pd/GAC or Pd/GFC; the high adsorption capacity of Pd/ACC lead suggesting its use in a technology with periodic adsorption and HDC, in similarity to adsorption with regeneration of GAC.

Pd/GFC and Pd–Cu/GFC are promising catalyst for removal of nitrites and nitrates, showing activity and selectivity that compares favorably with those of powdered catalysts.

Structure and Properties of B4C - SiC Composites

We have investigated how the composition, grain morphology, and method of preparing the starting mixture affect the processes that form the structure and phase composition of B₄C - SiC composites during hot pressing. We found that, depending on the composition of the initial powder mixtures, which is responsible for different mechanisms of consolidation of ceramic materials during hot pressing, the grain size of the main B₄C phase and its defect content as well as the nature of the SiC phase distribution within the material differ significantly. When B₄C - SiC composites with a low SiC content are made from initial B₄C - B₄Si - B - C powder mixtures those composites have a high cracking resistance because of their fine grain structure.__________Translated from Poroshkovaya Metallurgiya, Nos. 3–4(442), pp. 112–119, March–April, 2005.     

Comparing Five and Lower-Dimensional Grain Boundary Character and Energy Distributions in Copper: Experiment and Molecular Statics Simulation

Metallurgical and Materials Transactions A - The misorientation of 515 grain boundaries has been determined using electron backscatter diffraction data from an 18 μm thick copper foil with...