Improved quantum efficiency of Sr(Al,Si)5(O,N)7:Ce3+ by selection of Ce raw material

The luminescence properties of yellow-emitting Ce³⁺-doped Sr-containing sialon phosphor Sr(Al,Si)₅(O,N)₇:Ce³⁺ were notably improved by the Ce raw material selection. By changing the Ce raw material from oxides to nitrides or chlorides, the emission wavelength shifted to above 560 nm, which is beneficial for higher color rendering index white light-emitting diodes. This result from an increase in the covalency of the host crystal being associated with a decrease in the oxygen content. When Ce chloride was used, both the absorption and internal quantum efficiency increased, resulting in an increase in the external quantum efficiency up to 65%–72%. Inductively coupled plasma mass spectrometry, X-ray diffraction, and electron spin resonance measurements showed that the reason for the absorption increase is an increase in Ce³⁺ content and suppression of the generation of the second phase, and the reason for the increase in the internal quantum efficiency is a decrease in the host crystal absorption via suppression of anion vacancy generation. It was found that Ce chloride not only suppresses oxygen impurities but also acts as a flux that results in improved crystallinity.     

Dynamics and biogeochemical significance of the physical environment in Lake Biwa

We have examined two aspects of the dynamics and biogeochemical significance of the physical environment in Lake Biwa. One is the horizontal distribution of cyanobacteria as it relates to the ‘first gyre’ in the north basin of Lake Biwa. We could easily measure the first gyre using a vessel‐mounted acoustic doppler currents profiler. We were able to quantify the dynamics of the horizontal and vertical structure of currents and water temperature of this gyre. The first gyre did not remain at a fixed position; it moved north and south according to the growth of the gyre. This may play a role in the redistribution of cyanobacteria from place to place in the north basin. The second important environmental dynamic we measured was oxygen consumption rates from 1994 to 2000. We found that the minimum oxygen concentration in the hypolimnion has a clear inverse relationship with the apparent oxygen consumption rates in the 80–85 m depth layer. As a reduction in oxygen concentration in the hypolimnion can have a serious impact on benthic organisms, we concluded that the Lake Biwa environment should be monitored carefully and systematically.     

Bright-field scanning confocal electron microscopy using a double aberration-corrected transmission electron microscope

Scanning confocal electron microscopy (SCEM) offers a mechanism for three-dimensional imaging of materials, which makes use of the reduced depth of field in an aberration-corrected transmission electron microscope. The simplest configuration of SCEM is the bright-field mode. In this paper we present experimental data and simulations showing the form of bright-field SCEM images. We show that the depth dependence of the three-dimensional image can be explained in terms of two-dimensional images formed in the detector plane. For a crystalline sample, this so-called probe image is shown to be similar to a conventional diffraction pattern. Experimental results and simulations show how the diffracted probes in this image are elongated in thicker crystals and the use of this elongation to estimate sample thickness is explored.     

Quantitative structural analysis of twin boundary in alpha-Zn7Sb2O12 using HAADF STEM method

The structure and composition of the 1/4{110} twin boundary in alpha-Zn7Sb2O12 have been determined by using quantitative high-angle annular dark field scanning transmission electron microscopy (HAADF STEM) analysis. The noise in the experimental HAADF STEM images is reduced by using the maximum entropy method and average processing, and the parameters used in dynamical simulations are experimentally determined. From the analysis, it has been found that octahedral sites in the twin boundary slightly shift parallel to the [110] direction, and a reduction of the Sb concentration at the octahedral sites on the plane adjacent to the twin boundary was detected. The reduction was measured from three regions in the same twin boundary, and the Sb concentrations were 4 +/- 3, 8 +/- 3 and 19 +/-2 at% from 33 at%.     

Ultra light-weight and high-resolution X-ray mirrors using DRIE and X-ray LIGA techniques for space X-ray telescopes

We are developing novel ultra light-weight and high-resolution X-ray micro pore optics for space X-ray telescopes. In our method, curvilinear micro pore structures are firstly fabricated by silicon deep reactive ion etching (DRIE) or X-ray LIGA processes. Secondly, side walls of the micro structures are smoothed by magnetic field assisted finishing and/or hydrogen annealing techniques for high reflectivity mirrors. Thirdly, to focus parallel X-ray lights from astronomical objects, these structures are elastically or plastically bent into a spherical shape. Fourthly, the bent structures are stacked to form a multi-stage X-ray telescope. In this paper, we report on fabrication and X-ray reflection tests of silicon and nickel X-ray mirrors using the DRIE and LIGA processes, respectively. For the first time, X-ray reflections were confirmed on both of the mirrors. Estimated rms roughnesses were 5 nm and 3 nm for the silicon and nickel mirrors, respectively.     

Thickness measurements with electron energy loss spectroscopy

Measurements of thickness using electron energy loss spectroscopy (EELS) are revised. Absolute thickness values can be quickly and accurately determined with the Kramers-Kronig sum method. The EELS data analysis is even much easier with the log-ratio method, however, absolute calibration of this method requires knowledge of the mean free path of inelastic electron scattering lambda. The latter has been measured here in a wide range of solids and a scaling law lambda approximately rho(-0.3) versus mass density rho has been revealed. EELS measurements critically depend on the excitation and collection angles. This dependence has been studied experimentally and theoretically and an efficient model has been formulated.     

Improvement of lysozyme recovery method from the precipitate of protein-anionic surfactant complexes

A new protein separation process using a surfactant and a polar organic solvent consists of a precipitation step and a recovery step. In the precipitation step, a protein-surfactant complex is precipitated from an aqueous solution, when an ionic surfactant, sodium di(2-ethylhexyl) sulfosuccinate (AOT), is added to an aqueous solution, including protein (lysozyme). In the recovery step, the precipitate is dissolved in a polar organic solvent, such as acetone, and the protein is recovered as precipitates when a very small amount of salt solution was added to remove surfactants from the protein-surfactant complex. However, the details of the protein recovery step from precipitate have not been studied yet. In this study, the improvement of the protein recovery step was examined from the viewpoint of a recovery ratio of protein and a remaining ratio of surfactant. The optimum NaCl concentration in the feed for the protein recovery was in the range of 0.05–0.2 kmol/m³. As the NaCl concentration in the feed increased to more than 0.2 kmol/m³, the precipitation ratio decreased due to the electrostatic screening effect of NaCl. It was found that the addition of a very small amount of NaCl solution to acetone was unnecessary when NaCl was included in the feed lysozyme solution. On the other hand, as the NaCl concentration decreased to less than 0.05 kmol/m³, the precipitation ratio was decreased due to the low re-precipitation of protein by the addition of a small amount of NaCl solution in acetone. In the case of the feed containing no salt, the desired NaCl concentration added to acetone was in the range above 0.2 kmol/m³. In addition, the most suitable volume ratio of acetone to feed was found to be 0.2.     

Biosynthetic Short Neuropeptides: A Rational Theory Based on Experimental Results for the Missing Pain-Relief Opioid Endomorphin Precursor Gene

Endomorphins are neuropeptides that bind strongly to μ-opioid receptors and are considered to play important roles in pain modulation and other biological functions. Two endomorphins have been identified, to date, endomorphine-1 and -2; both are tetrapeptides and differ by only a single amino acid in the third position. Both peptides were isolated from bovine brains; however, their precursor genes have not been identified. In this study, a nucleotide sequence corresponding to the endomorphin-1 peptide in an expressed sequence tag database has been found and a preproendomorphin-like precursor peptide from human brain complementary DNA (cDNA) has been cloned. The cDNA consists of nucleotide sequences of two already annotated predicted genes, and the putative peptide differs by one amino acid from the isolated endomorphin peptides. It is proposed herein that there is the possibility of unknown short proteins or peptide precursors being missed by automated gene prediction programs based on similarities of known protein sequences. A novel concept of how to produce endomorphins from a similar peptide is described. The oxidatively modified base might provide a clue for understanding discrepancies between nucleotide sequences on the genome and those on cDNAs.     

Efficient and precise cutting of zirconia ceramics using heated cutting tool

The thermally assisted machining of yttria-stabilized tetragonal zirconia polycrystal using a cutting tool heated with induction heating was proposed. Although the conventional thermally assisted machining cannot be applied to drilling, the proposed method can be. Heat transfer from the heated cutting tool to the workpiece was simulated analytically, and the result showed that heating of the tool up to 500 °C produced an increase of 150–400 °C in the workpiece temperature. Cutting experiments demonstrated an improvement in machinability.     

Influence of temperature on the fatigue strength of compressed-hydrogen tanks for vehicles

The influence of environmental temperatures on the fatigue strength of compressed-hydrogen tanks for vehicles was investigated. The fatigue strength of Type-3 tanks was found to decrease in a low-temperature environment and increase in a high-temperature environment. The Type-3 tank has been subjected to autofrettage to improve fatigue strength. The investigation clarified that the effect of autofrettage changes according to the environmental temperature due to the difference between the coefficients of thermal expansion of carbon fiber reinforced plastic and aluminum alloy. This causes fatigue strength to change with changes in temperature. The Type-4 tank has a very long fatigue life and did not break after 45,000 cycles in a room-temperature or low-temperature environment. In a high-temperature environment, however, the tank broke in fewer than 45,000 cycles. The fatigue of carbon fiber reinforced plastic was promoted in the high-temperature environment, resulting in breakage of the tank. These results indicate that the fatigue strength of the tanks is influenced by the environmental temperature.