An efficient verifiable (t,n)-threshold secret image sharing scheme with ultralight shares

Multimedia Tools and Applications - A secret sharing scheme partitions a secret into a set of shares and distributes them among the eligible participants, with each participant receiving one share...     

Electrospun microporous gelatin–polycaprolactone blend tubular scaffold as a potential vascular biomaterial

The work reported involved the fabrication of an electrospun tubular conduit of a gelatin and polycaprolactone (PCL) blend as an adventitia‐equivalent construct. Gelatin was included as the matrix for increased biocompatibility with the addition of PCL for durability. This is contrary to most of the literature available for biomaterials based on blends of gelatin and PCL where PCL is the major matrix. The work includes the assiduous selection of key electrospinning parameters to obtain smooth bead‐free fibres with a narrow distribution of pore size and fibre diameter. Few reports elucidate the optimization of all electrospinning parameters to fabricate tubular conduits with a focus on obtaining homogeneous pores and fibres. This stepwise investigation would be unique for the fabrication of gelatin–PCL electrospun tubular constructs. The fabricated microfibrous gelatin–PCL constructs had pores of size ca 50–100 μm reportedly conducive for cell infiltration. The measured value of surface roughness of 57.99 ± 17.4 nm is reported to be favourable for protein adhesion and cell adhesion. The elastic modulus was observed to be similar to that of the tunica adventitia of the native artery. Preliminary in vitro and in vivo biocompatibility tests suggest safe applicability as a biomaterial. Minimal cytotoxicity was observed using MTT assay. Subcutaneous implantation of the scaffold demonstrated acute inflammation which decreased by day 15. The findings of this study could enable the fabrication of smooth bead‐free microfibrous gelatin–PCL tubular construct as viable biomaterial which can be included in a bilayer or a trilayer scaffold for vascular tissue engineering. © 2019 Society of Chemical Industry     

Synthesis,structure, CO oxidation,and H2 production activities of CaCu3−xMnxTi4−xMnxO12 (x = 0, 0.5, and 1.0)

Synthesis of nanocrystalline pristine and Mn-doped calcium copper titanate quadruple perovskites, CaCu_3?xMn_xTi_4?xMn_xO₁₂ (x = 0, 0.5, and 1.0) by modified citrate solution combustion method has been reported. Powder X-ray diffraction patterns attest the phase purity of the perovskite materials. Average particle sizes of all the materials obtained from the Scherrer's formula are in the range of 55–70 nm. The specific surface areas for all the perovskites obtained from BET isotherms are found to be low as expected for the condensed oxide systems and fall in the range of 13–17 m² g^?1. Transmission electron microscopy studies show a reduction in particle size of CaCu₃Ti₄O₁₂ with increase in Mn doping. Ca and Ti are present in +2 and +4 oxidation states in all the materials as demonstrated by X-ray photoelectron spectroscopy analyses. Cu²⁺ gets reduced in CaCu₃Ti₄O₁₂ with higher Mn content. Mn is observed to be present only in +3 oxidation state. All the materials have been examined to be active in CO oxidation as well as H₂ production from methanol steam reforming. CaCu₃Ti₄O₁₂ with ~14 at.% Mn is found to show best catalytic activities among these materials. A comprehensive analysis of the catalytic activities of these perovskites toward CO oxidation and H₂ production from MSR reveal the cooperative activity of copper-manganese in the doped perovskites and it is more effective at lower manganese content.     

Large Area Self-Assembled Ultrathin Polyimine Nanofilms Formed at the Liquid–Liquid Interface Used for Molecular Separation

Separation membranes with higher molecular weight cut-offs are needed to separate ions and small molecules from a mixed feed. The molecular sieving phenomenon can be utilized to separate smaller species with well-defined dimensions from a mixture. Here, the formation of freestanding polyimine nanofilms with thicknesses down to ≈14 nm synthesized via self-assembly of pre-synthesized imine oligomers is reported. Nanofilms are fabricated at the water–xylene interface followed by reversible condensation of polymerization according to the Pieranski theory. Polyimine nanofilm composite membranes are made via transferring the freestanding nanofilm onto ultrafiltration supports. High water permeance of 49.5 L m^-2 h⁻¹ bar⁻¹ is achieved with a complete rejection of brilliant blue-R (BBR; molecular weight = 825 g mol⁻¹) and no more than 10% rejection of monovalent and divalent salts. However, for a mixed feed of BBR dye and monovalent salt, the salt rejection is increased to ≈18%. Membranes are also capable of separating small dyes (e.g., methyl orange; MO; molecular weight = 327 g mol⁻¹) from a mixed feed of BBR and MO. Considering a thickness of ≈14 nm and its separation efficiency, the present membrane has significance in separation processes.     

Development of LTCC micro-hotplate with PTC temperature sensor for gas-sensing applications

Low temperature co-fired ceramic (LTCC) micro-hotplates show wide applications in gas sensors and micro-fluidic devices. It is easily structured in three-dimensional structures. This paper presents the low power consumption micro-hotplates which were developed with PTC (positive temperature coefficient) temperature sensor and inter-digitated electrodes. The paper presents two different structures for micro-hotplate with platinum as a heating element. The PTC temperature sensor using two different materials viz. PdAg and platinum paste are developed with micro-hotplates. The simulation has been achieved through COMSOL for LTCC and alumina micro-hotplates. The temperature variation with power consumption has been measured for the developed LTCC micro-hotplates. The change in resistance of PTC temperature sensors was measured with micro-hotplate temperature. The aim of this study was to place a temperature sensor with the gas sensor module to measure and control the temperature of micro-hotplate. A SnO₂ sensing layer is coated on LTCC micro-hotplate using screen printing and characterized for the sensing of carbon monoxide gas (CO). This study will be beneficial for designing hotplates based on LTCC technology with low power consumption and better stability of temperature for gas-sensing applications.     

Using Web resources to construct multilingual medical thesaurus for cross-language medical information retrieval

Due to the language barrier, non-English users are unable to retrieve the most updated medical information from the U.S. authoritative medical websites, such as PubMed and MedlinePlus. However, currently, there is no any cross-language medical information retrieval (CLMIR) system that can help Chinese-speaking consumers cross the language barrier in finding useful English medical information. A few CLMIR systems utilize MeSH (Medical Subject Headings) to help overcome the language barrier. Unfortunately, the traditional Chinese version of MeSH is currently unavailable.In this paper, we employ a semi-automatic term translation method to construct a Chinese–English MeSH by exploiting abundant multilingual Web resources, including Web anchor texts and search–result pages. Through this method, we have developed a Chinese–English Mesh Compilation System to assist knowledge engineers in compiling a Chinese–English medical thesaurus with more than 19,000 entries. Furthermore, this thesaurus has been used to develop a prototypical system for cross-language medical information retrieval, MMODE, which can help consumers retrieve top-quality English medical information using Chinese terms.     

Antihyperglycemic activity of phenolics from Pterocarpus marsupium

Glucose levels in rats with hyperglycemia induced by streptozotocin were determined after i.p. administration of marsupsin (1), pterosupin (2), and pterostilbene (3), three important phenolic constituents of the heartwood of Pterocarpus marsupium. Marsupsin and pterostilbene significantly lowered the blood glucose level of hyperglycemic rats, and the effect was comparable to that of 1,1-dimethylbiguanide (metformin).     

SH3 binding domains in the dopamine D4 receptor

The dopamine D4 receptor is a G protein-coupled receptor (GPCR) that belongs to the dopamine D2-like receptor family. Functionally, the D2-like receptors are characterized by their ability to inhibit adenylyl cyclase. The dopamine D4 receptor as well as many other catecholaminergic receptors contain several putative SH3 binding domains. Most of these sites in the D4 receptor are located in a polymorphic repeat sequence and flanking sequences in the third intracellular loop. Here we demonstrate that this region of the D4 receptor can interact with a large variety of SH3 domains of different origin. The strongest interactions were seen with the SH2-SH3 adapter proteins Grb2 and Nck. The repeat sequence itself is not essential in this interaction. The data presented indicate that the different SH3 domains in the adapter proteins interact in a cooperative fashion with two distinct sites immediately upstream and downstream from the repeat sequence. Removal of all the putative SH3 binding domains in the third intracellular loop of the dopamine D4 receptor resulted in a receptor that could still bind spiperone and dopamine. Dopamine could not modulate the coupling of these mutant receptors to adenylyl cyclase and MAPK, although dopamine modulated receptor-G protein interaction appeared normal. The receptor deletion mutants show strong constitutive internalization that may account for the deficiency in functional activation of second messengers. The data indicates that the D4 receptor contains SH3 binding sites and that these sites fall within a region involved in the control of receptor internalization.