Hysteresis of the water retention curves of geosynthetic clay liners in the high suction range

This paper examines two needle-punched geosynthetic clay liners' water retention behaviour at high suction ranges using the vapour equilibrium technique where super-saturated salt solutions controlled the relative humidity. This study shows that the bentonite form and its mineralogy affect the absorption/desorption of GCLs and their corresponding water retention curves. In particular, a granular bentonite-based GCL was found to absorb more and release less water than a powdered bentonite-based GCL due to its higher montmorillonite content and larger pores. The water retention curves of both GCLs exhibited very little hysteretic behaviour at high suction. Repeated wetting-drying cycles shifted the WRCs of both GCLs slightly downward with minimal impact on their degree of hysteresis.     

Evaluating leakages through GMB/GCL composite liners considering random hole distributions in wrinkle networks

This paper presents a study on the development of a hydraulic connectivity analysis-based approach for evaluating leakage rates through geomembrane (GMB)-geosynthetic clay liner (GCL) composite liners considering random hole distributions in a GMB wrinkle network. An algorithm for hydraulic connectivity analysis was developed to find the hydraulically connected wrinkles from a wrinkle network, and an explicitly expressed criterion is proposed to define the hydraulic connection between wrinkles under the assumption that only one of the two adjacent wrinkles is possible to be damaged. A Monte Carlo simulation was used to evaluate the probability weighted average of the total leakage through multiple randomly distributed holes considering numerous possible combinations of locations of holes. The proposed approach was applied to typical examples reported in the literature and shows that it can objectively quantify the effect of the hydraulic properties of the liner and overburden pressure on the hydraulic connectivity between wrinkles in a wrinkle network. The proposed approach also allowed assessing the effect of different probabilities of various hole distributions on the calculated leakage, which was demonstrated to be non-negligible, especially when the hole frequency is small.     

The Solutions on One-Dimensional Dirac Oscillator with Energy-Dependent Potentials and Their Effects on the Shannon and Fisher Quantities of Quantum Information Theory

Journal of Low Temperature Physics - In this paper, we focus, at first, on the exact solutions on the one-dimensional Dirac oscillator with the energy-dependent potentials. Then, the influence of...     

Spray drying of drug-swellable dispersant suspensions for preparation of fast-dissolving,high drug-loaded,surfactant-free nanocomposites

Bioavailability of a poorly soluble drug can be improved by preparing a drug nanosuspension and subsequently drying it into nanocomposite microparticles (NCMPs). Unfortunately, drug nanoparticles aggregate during milling and drying, causing incomplete recovery and slow dissolution. The aim of this study is to investigate the impact of various classes of dispersants on drug dissolution from drug NCMPs, with the ultimate goal of enhancing the bioavailability of poorly water-soluble drugs via high drug nanoparticle loaded, surfactant-free NCMPs. Precursor suspensions of griseofulvin (GF, model drug) nanoparticles in the presence of various dispersants were prepared via wet stirred media milling and spray dried to form the NCMPs. Hydroxypropyl cellulose (HPC, polymer) alone and with sodium dodecyl sulfate (SDS, surfactant) was used as a base-line stabilizer/dispersant during milling. Two swellable crosslinked polymers, croscarmellose sodium (CCS) and sodium starch glycolate (SSG), and a conventional soluble matrix former, Mannitol, were used in addition to HPC. Besides being used as-received, CCS was also wet co-milled with GF for two different durations to examine the impact of CCS particle size. Laser diffraction, scanning electron microscopy, powder X-ray diffraction (XRD), UV spectroscopy, NCMP redispersion and dissolution tests were used for characterization. The results show that incorporation of CCS/SSG, preferably wet-milled to a wide particle size distribution, into the spray-dried NCMPs resulted in fast release and dispersion of drug nanoparticle clusters. The swellable dispersants were superior to Mannitol in dissolution enhancement, and could achieve fast release comparable to SDS, demonstrating the feasibility of spray drying to prepare high drug-loaded, surfactant-free nanocomposites.     

A clonal selection algorithm for the generalized cell formation problem considering machine reliability and alternative routings

The cell formation is the first step in the design of Cellular Manufacturing systems. It consists of grouping parts with similar processing needs into cells and identifying the set of machines needed to process these parts. The aim is to minimize the material handling costs and maximize the use of the machines. In this paper, the machine reliability and the alternative process routings are taken into account to form the production cells. The presence of these factors in addition to the production volume, operation sequence and production time makes the problem more realistic but also more complex. Most authors solve this kind of problems by mathematical programming approaches that require large amounts of computational efforts. Therefore, a modified version of the Clonal Selection Algorithm is introduced and a local search mechanism is adopted in this paper. The obtained results are compared with those of the Branch and Bound (B&B) method using LINGO software. The comparison reveals the effectiveness and the efficiency of the proposed method in terms of both solution quality and computation time required.     

A four variable refined plate theory for nonlinear cylindrical bending analysis of functionally graded plates under thermomechanical loadings

In this paper we present a new application for a four variable refined plate theory to analyse the nonlinear cylindrical bending behavior of functionally graded plates subjected to thermomechanical loadings. This recent theory is based on the assumption that the transverse displacements consist of bending and shear components in which the bending components do not contribute toward shear forces and, likewise, the shear components do not contribute toward bending moments. The theory accounts for a quadratic variation of the transverse shear strains across the thickness, and satisfies the zero traction boundary conditions on the top and bottom surfaces of the plate without using shear correction factors. The material properties are assumed to vary continuously through the thickness of the plate according to a power-law distribution of the volume fraction of the constituents. The non-linear strain-displacement relations in the von Karman sense are used to study the effect of geometric non-linearity. The solutions are achieved by minimizing the total potential energy and the results are compared to the classical and the first-order theories reported in the literature. It can be concluded that the proposed theory is accurate and simple in solving the nonlinear cylindrical bending behavior of functionally graded plates.     

A Novel Constellation Shaping Technique for Bit-Interleaved Coded Modulation

We present a new and simple method which consists to apply constellation shaping to bit-interleaved turbo-coded modulation (BICTM) over additive white Gaussian noise channels. By assuming the example of a 3-bit/dim 16-PAM BITCM, it is shown that this technique can provide shaping gain of 0.79 dB.     

Optimal Heat Input for Estimating Luikov's Parameters in a Heat and Mass Transfer Problem

In this article, the problem of computing an optimal heat input in Luikov's heat and mass transfer problem is detailed and analyzed. The main objective is the establishment of an optimal time-dependent heat flux profile with the goal of maximizing the temperature and moisture sensitivities of some parameters to this excitation in a drying process. Such maximization makes the estimation of the desired parameters possible, easier, and with limited uncertainty intervals. It also helps to reduce the linearity dependence between the parameters of interest and the number of temperature and moisture sensors used. The estimation of the optimal heat input is obtained with Uzawa's algorithm, while the estimation of parameters is performed with Levenberg-Marquardt's method of minimization of the ordinary least-square criterion. The six dimensionless parameters characterizing Luikov's equations are estimated successfully with this optimal heat flux profile, which also helps to reduce the number of both temperature and moisture sensors needed in the estimation procedure. By doing so, the objective of estimating simultaneously the six parameters which appear in the formulation of Luikov's physical problem is reached by using a limited transient temperature and/or moisture measurements taken anywhere in the drying medium.     

Etude des caractéristiques résiduelles des sols du site instable de Bouchegouf (Algerie)

Cet article présente une étude comparative des caractéristiques résiduelles obtenues à l'aide de l'appareil de cisaillement annulaire et de la boite de cisaillement alterné. Les échantillons de sols étudiés proviennent du site instable de Bouchegouf (Algérie). Des corrélations entre les différents paramètres pouvant influer sur ces caractéristiques résiduelles ont été faites. Il a été, notamment, montré que les résultats obtenus à l'aide de l'appareil de Bromhead sur des échantillons remaniés sont très voisins de ceux obtenus à l'aide du cisaillement alterné sur des échantillons intacts quand la fraction argileuse est importante.     

Reduction by CO-CO2 and cracking of iron ore sinters,part 2: cracking

The cracking of iron ore sinters during their low-temperature reduction to magnetite, in the upper part of the blast furnace, is a considerable handicap for the operation of the furnace. However, in spite of numerous previous investigations, it is not fully understood. Dealing with two different sinters, a synthetic and an industrial one, their hematite was reduced to magnetite by CO-CO₂, with varied temperatures and gas compositions. Cracking is strongly favoured by low temperature and low CO partial pressure. Under such conditions, the cracks are initiated by localized nucleation and there is no need for extended stress along the hematite-magnetite interface. The crack propagation is independent of the hematite crystals orientation, and the glassy gangue grain boundaries easily transmit the stress.