Effect of in-flight particle behavior on the morphology of flame sprayed Er2O3 splats

The morphology and microstructure of splats impact the comprehensive capability of a new coating methodology called chelate flame spraying (CFS). This study addresses the quantitative characterization of the spread morphologies of flame sprayed Er₂O₃ splats directly deposited under different spray conditions on aluminum alloy substrates with a mirror finish. The influence of the in-flight particle temperature and velocity, carrier gas type, and carrier gas ratio on the solidification mechanism of molten droplets was investigated. Image analysis methods were employed to identify single splats from the morphology observed with field-emission scanning electron microscopy (FE-SEM). In addition, Er₂O₃ films were synthesized on an Al–Mg alloy (A5052) substrate using N₂ or O₂ as the carrier gas. When O₂ was used as the carrier gas, 109-μm-thick films were deposited on the A5052 substrate. The cross-sectional porosity of the films was 3.8%. In contrast, films with 101-μm thickness were synthesized on the A5052 substrate when N₂ was used as the carrier gas. The cross-sectional porosity of these films was 13.8%. The results showed that the carrier gas type (N₂) and carrier gas ratio had a significant effect on the flattening behavior of the molten droplets. A spraying method combined with multidimensional modes is proposed to control the morphology of the splats.     

中药桂枝总黄酮的提取工艺研究

优化桂枝总黄酮的提取工艺，建立桂枝的提取和含量测定方法。通过单因素试验，考察提取方法、提取溶剂浓度、提取体积、提取时间对药材总黄酮含量的影响，采用正交试验，优化提取工艺条件，筛选出桂枝总黄酮的最佳提取工艺。总黄酮最佳提取工艺为75%乙醇、料液比1:40、回流提取时间60 min。该方法能有效测定桂枝药材总黄酮的含量，为该药材的质量标准研究提供一定的科学依据。本方法重复性较好、方法稳定、可行。     

Surface Reconstruction Engineering with Synergistic Effect of Mixed-Salt Passivation Treatment toward Efficient and Stable Perovskite Solar Cells

Surface passivation treatment is a widely used strategy to resolve trap-mediated nonradiative recombination toward high-efficiency metal-halide perovskite photovoltaics. However, a lack of passivation with mixture treatment has been investigated, as well as an in-depth understanding of its passivation mechanism. Here, a systematic study on a mixed-salt passivation strategy of formamidinium bromide (FABr) coupled with different F-substituted alkyl lengths of ammonium iodide is demonstrated. It is obtained better device performance with decreasing chain length of the F-substituted alkyl ammonium iodide in the presence of FABr. Moreover, they unraveled a synergistic passivation mechanism of the mixed-salt treatment through surface reconstruction engineering, where FABr dominates the reformation of the perovskite surface via reacting with the excess PbI₂. Meanwhile, ammonium iodide passivates the perovskite grain boundaries both on the surface and top perovskite bulk through penetration. This synergistic passivation engineer results in a high-quality perovskite surface with fewer defects and suppressed ion migration, leading to a champion efficiency of 23.5% with mixed-salt treatment. In addition, the introduction of the moisture resisted F-substituted groups presents a more hydrophobic perovskite surface, thus enabling the decorated devices with excellent long-term stability under a high humid atmosphere as well as operational conditions.     

Design,preparation, and characterization of new high-refractive index hybrid organic–inorganic polysiloxanes: Innovative coatings for optoelectronic applications

The current demand for high-refractive index materials is very high due to their importance in optoelectronic applications. Such materials already exist in the market, but they present many disadvantages. They might contain toxic metals; their preparation can be challenging or produce high quantity of waste. Consequently, there is an urgent need to produce new friendly coatings with high-refractive index. Hybrid organic–inorganic polysiloxanes can offer a solution to this problem. They can be easily prepared from nontoxic alkoxy silanes using the sol–gel chemistry process. Herein, a series of new hybrid polysiloxanes are synthesized from the monomer 1–(2–(triethoxysilyl)ethyl)triphenylsilane and other silanes. The preparation of the macromolecules is optimized at both stages of the sol–gel process. The polymers are characterized by gel permeation chromatography and NMR spectroscopy. Spin coating of the materials on silicon wafers, followed by film thickness and refractive index measurements, indicates that the new polysiloxanes can have refractive indexes as high as 1.6 with thicknesses varying from 2200 to 3700 nm. Consequently, it is expected that the new materials described in this report are valuable for optoelectronic applications such as high-dielectric constant (high-k) gate oxides, interlayer high-k dielectrics, or high-refractive index abrasion resistant coatings.     

武汉市一般人群血清中全氟及多氟烷基化合物浓度及其影响因素研究

目的 了解武汉市一般人群血清中全氟及多氟烷基化合物(PFASs)浓度,探索血清中PFASs浓度水平的影响因素。方法 以在武汉市某医院进行一般体检的人群为研究对象(n=67),通过超高效液相色谱-三重四级杆质谱(UPLC-TQ/MS)联用仪测定外周血清中12种PFASs浓度,采用多元线性回归分析方法分析一般人口学特征和血清中PFASs浓度的关联性。结果 武汉市一般人群血清中12种PFASs的平均浓度水平为11.60 ng/mL。全氟辛烷磺酸及其盐类(PFOS)和全氟辛酸及其盐类(PFOA)的贡献率较大,分别为45.03%和31.86%。男性人群血清中PFOS、PFOA、全氟己基磺酸(PFHxS)、全氟壬酸(PFNA)等主要化合物的浓度高于女性,其β值(95%可信区间)分别为0.708(0.313,1.104)、0.518(0.069,0.967)、0.724(0.388,1.059)和0.684(0.399,0.968)。同时,发现血清中PFOS、PFHxS、PFNA浓度和年龄呈正相关,其β值(95%可信区间)分别为0.062(0.042,0.081)、0.035(0.019,0.052)和0.030(0.016,0.045)。结论 性别和年龄对血清中PFASs浓度有影响,在进行人体PFASs暴露评估中应考虑这些因素。     

25CN-NBOH: A Selective Agonist for in vitro and in vivo Investigations of the Serotonin 2A Receptor

4-(2-((2-hydroxybenzyl)amino)ethyl)-2,5-dimethoxybenzonitrile (25CN-NBOH) was first reported as a potent and selective serotonin 2A receptor (5-HT_2AR) agonist in 2014, and it has since found extensive use as a pharmacological tool in a variety of in vitro, ex vivo and in vivo studies. 25CN-NBOH is readily available from a synthetic perspective using standard chemical transformations, and displays favorable physiochemical properties in terms of stability and solubility. Due to its superior selectivity for 5-HT_2AR, 25CN-NBOH has been used to investigate the effects of selective 5-HT_2AR activation in vivo, and has thus become an important pharmacological tool for the exploration of 5-HT_2AR signaling in a range of animal models. In the present review, we outline the discovery of 25CN-NBOH, its pharmacological profile and major findings from studies where it has been used.     

Spurenstoffabtrennung mit keramischen Nanofiltrationsmembranen als Rotationsscheibenfilter

Reducing micropollutant pollution of water bodies is an important objective of water management and an integral part of environmental policy. Ceramic nanofiltration membranes were developed as multichannel membranes of increased membrane area and rotating disk filters. The membranes developed show retention of over 80 % for PEG 400. The membranes are currently being tested for the separation of micropollutants from wastewater contaminated with pharmaceuticals. With the help of a downstream oxidative process, the trace substances remaining in the permeate are degraded.     

The Versatile Manipulations of Self-Assembled Proteins in Vaccine Design

Protein assemblies provide unique structural features which make them useful as carrier molecules in biomedical and chemical science. Protein assemblies can accommodate a variety of organic, inorganic and biological molecules such as small proteins and peptides and have been used in development of subunit vaccines via display parts of viral pathogens or antigens. Such subunit vaccines are much safer than traditional vaccines based on inactivated pathogens which are more likely to produce side-effects. Therefore, to tackle a pandemic and rapidly produce safer and more effective subunit vaccines based on protein assemblies, it is necessary to understand the basic structural features which drive protein self-assembly and functionalization of portions of pathogens. This review highlights recent developments and future perspectives in production of non-viral protein assemblies with essential structural features of subunit vaccines.     

The home environment in a nationwide sample of multi-family buildings in Sweden: associations with ocular,nasal, throat and dermal symptoms,headache, and fatigue among adults

Risk factors at home for ocular, nasal, throat and dermal symptoms, headache, and fatigue were studied in a nationwide questionnaire survey in Sweden, the BETSI study in 2006. Totally, 5775 adults from a stratified random sample of multi-family buildings participated. Associations between home environment factors and weekly symptoms were analyzed by multi-level logistic regression. In total, 8.3% had ocular symptoms; 11.9% nasal symptoms; 7.1% throat symptoms; 11.9% dermal symptoms; 8.5% headache and 23.1% fatigue. Subjects in colder climate zones had more mucosal and throat symptoms but less fatigue and ocular symptoms. Rented apartments had poorer indoor environment than self-owned apartments. Those living in buildings constructed from 1961 to 1985 had most symptoms. Building dampness, mold and mold odor were risk factors, especially headache and ocular symptoms. Lack of mechanical ventilation system was another risk factor, especially for headache. Environmental tobacco smoke (ETS), electric radiators, and crowdedness were other risk factors. Oiled wooden floors, recent indoor painting, and new floor materials were negatively associated with symptoms. In conclusion, building dampness, mold, poor ventilation conditions, crowdedness, ETS, and emissions from electric radiators in apartments in Sweden can increase the risk of ocular, nasal, throat and dermal symptoms, headache, and fatigue.