Impact of Firefighting Sprays on the Fire Performance of Structural Steel Members

Fire Technology - The feasibility of coupled computational fluid dynamics (CFD) and finite element (FE) simulations to aid the planning of fire intervention tactics and the effectiveness of...     

Additive manufacturing of monolithic supercapacitors with biopolymer separator

Journal of Applied Electrochemistry - In this paper, additive layer-by-layer fabrication of a fully screen printed monolithic supercapacitor exhibiting performance comparable with supercapacitors...     

Characteristics of day‐ahead wind power forecast errors in Nordic countries and benefits of aggregation

The growing proportion of wind power in the Nordic power system increases day‐ahead forecasting errors, which have a link to the rising need for balancing power. However, having a large interconnected synchronous power system has its benefits, because it enables to aggregate imbalances from large geographical areas. In this paper, day‐ahead forecast errors from four Nordic countries and the impacts of wind power plant dispersion on forecast errors in areas of different sizes are studied. The forecast accuracy in different regions depends on the amount of the total wind power capacity in the region, how dispersed the capacity is and the forecast model applied. Further, there is a saturation effect involved, after which the reduction in the relative forecast error is not very large anymore. The correlations of day‐ahead forecast errors between areas decline rapidly when the distance increases. All error statistics show a strong decreasing trend up to the area sizes of 50,000 km². The average mean absolute error (MAE) in different regions is 5.7% of installed capacity. However, MAE of a smaller area can be over 8% of the capacity, but when all the Nordic regions are aggregated together, the capacity‐normalized MAE decreases to 2.5%. The average of the largest errors for different regions is 39.8% and when looking at the largest forecast errors for smaller areas, the largest errors can exceed 80% of the installed capacity, whereas at the Nordic level, the maximum forecast error is only 13.5% of the installed capacity. Copyright © 2016 John Wiley & Sons, Ltd.     

Rigorous and approximate analysis of metallic gratings in soft X-ray and EUV regions

Abstract

In deep ultraviolet and soft X-ray regions the complex refractive indices of metals differ substantially from their values in the visible region of the spectrum. The implications of this fact are analysed for metallic gratings illuminated by electromagnetic fields with wavelengths ranging from soft X‐rays to near infrared, concentrating on short wavelengths. In particular, we study metal-stripe gratings (linear polarizers for visible light) by rigorous diffraction theory to determine the short-wavelength region in which a combination of the geometrical thin-element approximation and the theory of single-layer films can be applied. Then we study inductive grid filters for protection of X-ray detectors from infrared radiation in space applications.     

Synthesis of cobalt nanoparticles to enhance magnetic permeability of metal–polymer composites

Metallic cobalt nanoparticles were synthesized by hydrogen reduction method. Particles were coated in situ with carbon by adding ethene to reaction flow. Particles were characterized by transmission electron microscopy, energy dispersive X-ray emission, X-ray diffraction, X-ray fluorescence and BET method. The observed cobalt particle size distributions in different cobalt batches produced with unvarying reaction parameters was reproducible: The mean diameter of primary cobalt particle varied only 5% from the mean value of 76 nm in different batches. Increased carbon precursor concentration decreased mean diameter of cobalt particles to 17 nm. The produced nanoparticles were used as filler material in 0–3 type metal–polymer composites. Composite samples with varying filler loading were fabricated with mixing extrusion and injection moulding techniques. The magnetic properties of the fabricated composites were measured up to 1 GHz. In order to analyse the particle distribution in composite matrix and its effect on magnetic properties the microstructure was studied.     

Fusion technology activities at JET: Latest results

The JET Task Force Fusion Technology (TF-FT) was launched in 2000 to use the unique capabilities, facilities and operating experience at JET to provide significant contributions to the research programme on both JET and ITER. This paper presents the most recent results obtained within the JET TF-FT programme.The Tritium (T) retention measurements have confirmed high surface but little bulk T concentrations on the MKII-SRP divertor tiles and T thermal desorption tests confirmed the necessity to reach at least 600 °C. From the 2007 shutdown the MKII-HD (more ITER like) divertor has revealed some slight changes in the nature of the erosion/deposition. In order to improve analysis, time resolution devices such as quartz micro-balances and rotating collectors have been located beneath the divertor for deposition and plasma physics correlations. Due to improvement of dedicated models and technologies, in situ laser techniques for detritiation and characterisation/removal have provided encouraging results on quantitative characteristics (composition, thickness, adherence, temperature) of deposited films on plasma facing components. A particular effort on temperature control of the new metallic ITER-like wall (ILW) that is presently being installed in JET has been pursued with active laser infrared thermography. JET TF-FT also contributes to the operator strategy to comply with the safety agency requirements for T management. Recent results on two major topics purification of tritiated water and development of the ³He method for the determination of the T concentration in waste drums are presented. Finally, this paper also presents some activities in preparation of the ILW for the pre-characterisation of marker tiles and the refurbishment of diagnostics for deposition characterisation.     

X-ray microbeam transmission/fluorescence method for non-destructive characterization of tungsten coated carbon materials

Tungsten erosion, its subsequent transport and redeposition are of great interest, because a full tungsten divertor is foreseen to be used during the deuterium–tritium operational phase of ITER. The erosion of tungsten and carbon marker layers was extensively studied in the outer divertor of ASDEX Upgrade (AUG), and work is currently in progress to completely replace the existing JET CFC tiles with tungsten-coated tiles within the JET ITER-like wall project. The need for fast and non-destructive method which allows the quantitative determination of the thickness of a tungsten coating on a carbon material on large areas led us to evaluate a combined absorption/fluorescence X-ray (XRTF) technique. The method can provide fast analysis, high spatial resolution and a material selective detection of deposited layers and inclusions. It was applied on W coated fine grain graphite (FGG) tiles from AUG's divertor. It is proved that the method is able to provide information about the uniformity of the tungsten coating on a graphite or CFC substrate whilst the technique can be used to determine the thickness of the tungsten and other marker materials coatings. It represents a unique instrument for the post-mortem analysis of the coatings.     

Considerations for Synchronization in Body Area Networks for Human Activity Monitoring

In this paper, we highlight considerations for synchronization issues in body area networks. Requirements for the synchronization accuracy in body area networks depend on the application at hand. Synchronization may be needed for power management, sample ordering, calculation of stimulus responses and for sensor fusion. This paper provides a theoretical exercise to help understand the accuracy required for typical human motion sensing. It gives an overview of various synchronisation strategies used and implemented in prototype systems. Lessons learnt from practical implementations using Bluetooth, an IEEE 802.15.4 proprietary network and Nanonet are presented to illustrate the principles involved. The discussion provides some considerations and the requirements for typical WBAN applications.     

Lattice Boltzmann simulations in microfluidics: probing the no-slip boundary condition in hydrophobic, rough, and surface nanobubble laden microchannels

In this contribution, we review recent efforts on investigations of the effect of (apparent) boundary slip by utilizing lattice Boltzmann simulations. We demonstrate the applicability of the method to treat fundamental questions in microfluidics by investigating fluid flow in hydrophobic and rough microchannels as well as over surfaces covered by nano- or microscale gas bubbles.     

Gone with the wind? Newspaper discourse of eutrophication and blue‐green algae blooms in Finland

The mass media shape the public and policy agenda by giving prominence to certain ecosystem changes and risks, as well as by framing some policy measures as the preferred ones. Based on longitudinal analysis of the leading Finnish newspaper, this study considers the media coverage of eutrophication. The results show an increase of reporting in the late 1990s as a result of intertwined ecological and social factors – i.e. intense algal occurrences and establishment of a national communication system. The news coverage has highlighted the harmful algal blooms and health risks of algal toxins and has framed short‐term weather conditions as the key factor regulating algal occurrences. This creates a challenge for environmental management aimed at reduction in the nutrient discharges that influence the state of the environment in the long term.