Benchmark experiment of large-angle scattering reaction cross section of iron at 14 MeV using two shadow bars – Comparison of experimental results with ENDF/B-VIII –

ABSTRACT

It is important to perform neutron transport simulations with accurate nuclear data in the neutronics design of a fusion reactor. However, absolute values of large-angle scattering cross sections vary among nuclear data libraries even for well-examined nuclide of iron. Benchmark experiments focusing on large-angle scattering cross sections were thus performed to confirm the correctness of nuclear data libraries. The series benchmark experiments were performed at a DT neutron source facility, OKTAVIAN of Osaka University, Japan, by the unique experimental system established by the authors’ group, which can extract only the contribution of large-angle scattering reactions. This system consists of two shadow bars, target plate (iron), and neutron detector (niobium). Two types of shadow bars were used and four irradiations were conducted for one experiment, so that contribution of room-return neutrons was effectively removed and only large-angle scattering neutrons were extracted from the measured four Nb reaction rates. The obtained experimental results were compared with calculations for five nuclear data libraries including JENDL-4.0, JEFF.-3.3, FENDL-3.1, ENDF/B- VII, and recently released ENDF/B-VIII. It was found from the comparison that ENDF/B-VIII showed the best result, though ENDF/B-VII showed overestimation and others are in large underestimation at 14 MeV.     

Conversion kinetics of container glass batch melting

Understanding the batch-to-glass conversion process is fundamental to optimizing the performance of glass-melting furnaces and ensuring that furnace modeling can correctly predict the observed outcome when batch materials or furnace conditions change. To investigate the kinetics of silica dissolution, gas evolution, and primary foam formation and collapse, we performed X-ray diffraction, thermal gravimetry, feed expansion tests, and evolved gas analysis of batch samples heated at several constant heating rates. We found that gas evolving reactions, foaming, and silica dissolution depend on the thermal history of the batch in a similar manner: the kinetic parameters of each process were linear functions of the square root of the heating rate. This kinetic similarity reflects the stronger-than-expected interdependence of these processes. On the basis of our results, we suggest that changes in furnace operating conditions, such as firing or boosting, influence the melting rate less than what one would expect without consideration of batch conversion kinetics.     

Seismic stability of embankments with different densities and upstream conditions related to the water level

Modeling an embankment by subjecting it to different upstream conditions in a centrifuge is challenging. However, the response of an embankment to shaking under different upstream conditions needs to be studied to ensure that the necessary precautions are taken during its construction and maintenance. Herein, the influence of different upstream conditions and embankment densities are investigated. The pore water pressure values at different locations in an embankment were recorded during seepage and under induced shaking. Accelerometers recorded the response of the embankment to shaking, and a linear variable differential transformer (LVDT) measured the settlement at the top of the embankment as a result of the shaking. An image analysis was used to trace the resulting deformation of the embankment due to the shaking. The results indicate that the upstream conditions of the embankment determine the failure mechanism of the embankment in cases of lower density. In addition, the distribution of the water content within the embankment was found to have a greater influence on its response to shaking than the water level height on its upstream side.     

Deoxidation of Ti Melt by Newly Developed Two-Step Plasma Arc Melting Process Using Hydrogen

Metallurgical and Materials Transactions B - A two-step plasma arc melting process, comprising a first step under Ar-30 pct H2 gas flow and the second step under Ar gas flow, has been...     

Urothelium-Specific Deletion of Connexin43 in the Mouse Urinary Bladder Alters Distension-Induced ATP Release and Voiding Behavior

Connexin43 (Cx43), the main gap junction and hemichannel forming protein in the urinary bladder, participates in the regulation of bladder motor and sensory functions and has been reported as an important modulator of day–night variations in functional bladder capacity. However, because Cx43 is expressed throughout the bladder, the actual role played by the detrusor and the urothelial Cx43 is still unknown. For this purpose, we generated urothelium-specific Cx43 knockout (uCx43KO) mice using Cre-LoxP system. We evaluated the day–night micturition pattern and the urothelial Cx43 hemichannel function of the uCx43KO mice by measuring luminal ATP release after bladder distention. In wild-type (WT) mice, distention-induced ATP release was elevated, and functional bladder capacity was decreased in the animals’ active phase (nighttime) when Cx43 expression was also high compared to levels measured in the sleep phase (daytime). These day–night differences in urothelial ATP release and functional bladder capacity were attenuated in uCx43KO mice that, in the active phase, displayed lower ATP release and higher functional bladder capacity than WT mice. These findings indicate that urothelial Cx43 mediated ATP signaling and coordination of urothelial activity are essential for proper perception and regulation of responses to bladder distension in the animals’ awake, active phase.     

Two Triterpene Synthases from Imperata cylindrica Catalyzing the Formation of a Pair of Diastereoisomers through Boat or Chair Cyclization

Imperata cylindrica is known to produce a pair of triterpenes, isoarborinol and fernenol, that exhibit identical planar structures but possess opposite stereochemistry at six of the nine chiral centers. These differences arise from a boat or a chair cyclization of the B-ring of the substrate. Herein, we report the characterization of three OSC genes from I. cylindrica. IcOSC1 and IcOSC5 were identified as isoarborinol and fernenol synthases, respectively, while IcOSC3 was characterized as a multifunctional enzyme that produces glutinol and friedelin as its major products. Mutational studies of isoarborinol and fernenol synthases revealed that the residues surrounding the DCTAE motif partially affected the conformation of the B-ring during cyclization. Additionally, the IcOSC1-W255H mutant produced the rare triterpene boehmerol. The introduced histidine residue presumably abstracted a proton from the intermediary carbocation at C18 during the 1,2-rearrangement. Expression analysis indicated that all OSC genes were highly expressed in stems.     

Theoretical estimation of dielectric loss of oxide glasses using nonequilibrium molecular dynamics simulations

To theoretically explore amorphous materials with a sufficiently low dielectric loss, which are essential for next-generation communication devices, the applicability of a nonequilibrium molecular dynamics simulation employing an external alternating electric field was examined using alkaline silicate glass models. In this method, the dielectric loss is directly evaluated as the phase shift of the dipole moment from the applied electric field. This method enabled us to evaluate the dielectric loss in a wide frequency range from 1 GHz to 10 THz. It was observed that the dielectric loss reaches its maximum at a few THz. The simulation method was found to qualitatively reproduce the effects of alkaline content and alkaline type on the dielectric loss. Furthermore, it reasonably reproduced the effect of mixed alkalines on the dielectric loss, which was observed in our experiments on sodium and/or potassium silicate glasses. Alkaline mixing was thus found to reduce the dielectric loss.     

Accumulation of nitrous oxide in aerobic groundwaters

N₂O concentrations in the groundwaters collected in the Kanto District and Nagano Prefecture in Japan and five counties in New York State were determined. These N₂O data were obtained from the water samples from wells, springs and seepages from soils in forests and cropping fields. The N₂O concentrations in all samples greatly exceeded those of atmospheric equilibration. The average concentration of 690 nM N₂O is one order of magnitude larger than that in deep ocean. All groundwaters of the present study were aerobic with a high level of NO₃⁻, but with the absence of NO₂⁻ and NH₄⁺, and with a very low level of dissolved organic carbon. These characteristics suggest that the nitrate respiration in the aquifers is of little significance for the production of N₂O.

ΔN₂O/NO₃⁻ molar ratios in the groundwaters were between 10⁻⁴ and 10⁻² (Δ indicates the excess gas over that which would be in equilibrium). This supports the above view since the observed N₂O yield agrees with that reported for the production during an ammonia oxidation. If nitrification was indeed a major mechanism for the production of groundwater N₂O, subsequent release of N₂O from the aquifers that are polluted with nitrogen may deserve more close attention as a potential source of atmospheric N₂O via diffusion and discharge.