Microstructure and mechanical behavior of laser aided additive manufactured low carbon interstitial Fe49.5Mn30Co10Cr10C0.5 multicomponent alloy

Laser aided additive manufacturing(LAAM)was used to fabricate bulk Fe49.5Mn30Co10Cr10C0.5 interstitial multicomponent alloy using pre-alloyed powder.The room temperature yield strength(σy),ultimate tensile strength(σUTS)and elongation(εUST)were 645 MPa,917 MPa and 27.0％respectively.The as-built sample consisted of equiaxed and dendritic cellular structures formed by elemental segregation.These cellular structures together with oxide particle inclusions were deemed to strengthen the material.The other contributing components include dislocation strengthening,friction stress and grain bound-ary strengthening.The high εUTS was attributed to dislocation motion and activation of both twinning and transformation-induced plasticity(TWIP and TRIP).Tensile tests performed at-40℃and-130℃demonstrated superior tensile strength of 1041 MPa and 1267 MPa respectively.However,almost no twinning was observed in the fractured sample tested at-40℃and-130℃.Instead,higher fraction of strain-induced hexagonal close-packed(HCP)ε phase transformation of 21.2％were observed for fractured sample tested at-40℃,compared with 6.3％in fractured room temperature sample.     

关于COVID-19、膜脂质与公众健康（网络首发、推荐阅读）

冠状病毒具有一层脂质膜。虽然复制需要劫持宿主的RNA工具来合成病毒体蛋白，但必须将其包裹在脂质膜中，促其萌生以扩展感染。最近研究表明，某些必需脂肪酸可以抑制其复制活性。脂质膜通常被认为是水溶物的脂肪屏障，但它对细胞和亚细胞的功能是高度有序和组分特异性的，其对病毒外壳可能也有最佳的特异性。虽然复制中DNA、RNA和蛋白质组成不受饮食影响，但脂质膜受其影响。此外，自1960年代以来，人们就知道男性对这些必需脂肪酸和膜完整性不足的敏感性高于女性。有证据表明，花生四烯酸和二十二碳六烯酸具有抗病毒、免疫、抗炎、控制血压和消退素活性，因此，迫切需要考察它们在Covid-19预防和治疗中的地位，也需重新评估现行的膳食指导。当前，有关脑、神经、血管和免疫系统等富含膜系统对脂质需求还尚未被详细认识。毫无疑问，这些脂质在几百万年来塑造人类基因组方面具有重要意义，因此，如果这些膜脂质失衡将会使人类面临机体紊乱和感染风险，且男性比女性风险更大。     

Feasibility study of large-scale mass customization 3D printing framework system with a case study on Nanjing Happy Valley East Gate

At present, the development and implementation of digital transformation are the keys to promoting high-quality industry development. The new digital fabrication method of robotic 3D printing is a research area being studied by many to tackle the issue of the declining productivity of traditional construction methods. Although many studies have been done, most of the current 3D printing projects are facing limitations in terms of scale. In order to bridge the gap, this article proposed a mass customization 3D printing framework system for large-scale projects. This article discusses how mass customization is made possible through the joint operation of the FUROBOT software and 3D printing hardware. By taking the east gate of Nanjing Happy Valley Plaza as a case study, the article demonstrates and studies the feasibility of the large-scale mass customization 3D printing framework system.     

空间的力量 新奥胡斯大学医院

正新奥胡斯大学医院是丹麦第一个超大型的医院案例,也是一个具有"康复医疗"概念的、超现代的国际先锋作品。医院的建筑设计通过系统运用"信息和循证"的工作方法,践行了"康复建筑"的综合理念。其"信息和循证"的方法是利用对现存建筑的研究和评估,以提供最有效的信息来创建最佳的康复建筑。从单人病房的设计、日光和光线的利用,以及景观和花园空间的设计,旨在尽量满足病人的需求,提升     

Strain rate dependency and fragmentation pattern of expanding warheads

For the characterization of the behaviors of a metal material in events like expanding warheads, it is necessary to know its strength and ductility at high strain rates, around 104e105/s. The flyer plate impact testing produces the uniform stress and strain rates but the testing is expensive. The Taylor test is relatively inexpensive but produces non-uniform stress and strain fields, and the results are not so easily inferred for material modeling. In the split-Hopkinson bar(SHB), which may be used in compression, tension and torsion testing, the strain rates never exceeds 103/s. In the present work, we use the expanding ring test where the strain rate is 104e105/s. A streak camera is used to examine the expanding ring velocity, and a water tank is used to collect the fragments. The experimental results are compared with the numerical simulations using the hydrocodes AUTODYN, IMPETUS Afea and a regularized smooth particle(RSPH) software. The number of fragments increases with the increase in the expansion velocity of the rings. The number of fragments is similar to the experimental results. The RSPH software shows much the same results as the AUTODYN where the Lagrangian solver is used for the ring. The IMPETUS Afea solver shows a somewhat different fragmentation characteristic due to the node splitting algorithm that induces pronounced tensile splitting.     

Nickel phosphonate MOF as efficient water splitting photocatalyst

A novel microporous two-dimensional(2D)Ni-based phosphonate metal-organic framework(MOF;denoted as IEF-13)has been successfully synthesized by a simple and green hydrothermal method and fully characterized using a combination of experimental and computational techniques.Structure resolution by single-crystal X-ray diffraction reveals that IEF-13 crystallizes in the triclinic space group Pi having bi-octahedra nickel nodes and a photo/electroactive tritopic phosphonate ligand.Remarkably,this material exhibits coordinatively unsaturated nickel(II)sites,free-P0₃H₂and-P0₃H acidic groups,a C0₂accessible microporosity,and an exceptional thermal and chemical stability.Further,its in-deep optoelectronic characterization evidences a photoresponse suitable for photocatalysis.In this sense,the photocatalytic activity for challenging H₂generation and overall water splitting in absence of any co-catalyst using UV-Vis irradiation and simulated sunlight has been evaluated,constituting the first report for a phosphonate-MOF photocatalyst.IEF-13 is able to produce up to 2,200 fimol of H₂per gram using methanol as sacrificial agent,exhibiting stability,maintaining its crystal structure and allowing its recycling.Even more,170μmol of H₂per gram were produced using IEF-13 as photocatalyst in the absence of any co-catalyst for the overall water splitting,being this reaction limited by the 0₂reduction.The present work opens new avenues for further optimization of the photocatalytic activity in this type of multifunctional materials.     

Organochlorines in Greenland lake sediments and landlocked Arctic char (Salvelinus alpinus)

Lake sediments and landlocked Arctic char (Salvelinus alpinus) were sampled in 1994 and 1995 at four different locations in Greenland, three at the west coast and one at the east coast. Sediments, char muscle and char liver were analysed for PCBs (10 congeners), DDTs (pp'), HCHs (alpha, beta, gamma), dieldrin, HCB and chlordanes (5) and char in addition to toxaphene (total and 4 congeners). All organochlorines in the sediment samples were below the detection limit of 0.1 microgram kg-1 dry wt., while the overall geometric means in Arctic char muscle were, in microgram kg-1 wet wt., for PCBs 11 (range 1-140), for DDTs 4.0 (1-35), for HCHs 0.4 (0.06-1.5), for dieldrin 0.7 (< 0.1-4.2), for HCB 0.7 (0.09-3.8), for chlordanes 4.8 (1-57) and for total toxaphene 13 (1-180). The sums of PCBs, DDTs, chlordanes and total toxaphene disclosed higher concentrations in muscle of char from the east coast compared to char from the west coast. Dieldrin and HCB showed the same tendency, but less pronounced, while the sum of HCHs were found in highest concentrations at the west coast. PCB, DDT, chlordane and toxaphene concentrations showed a decreasing trend following the East Greenland Current. Principal component analysis on PCB congeners showed that the proportion of higher chlorinated PCBs (Cl > 5) were higher in Qaqortoq in south Greenland compared to the three other sampling areas in Greenland. However, no correlation was seen either between degree of chlorination and latitude or between degree of chlorination and PCB concentrations.     

Effects of chelates on plants and soil microbial community: comparison of EDTA and EDDS for lead phytoextraction

Most studies on chelate-induced phytoextraction have focused on EDTA-mediated Pb phytoextraction. But EDTA and the formed EDTA-Pb complexes have low biodegradability and high solubility in soil, resulting in an elevated risk of adverse environmental effects. EDDS is an easily biodegradable chelating agent that has recently been proposed as an environmentally sound alternative to EDTA. Consequently, a greenhouse experiment, using a completely randomized factorial design with four replications, was carried out to compare the potential of EDTA and EDDS for chelate-induced Pb phytoextraction with Cynara cardunculus, as well as to investigate the toxicity of these two chelates to both cardoon plants and soil microorganisms. The effects of chelate addition on soil microbial communities were studied through the determination of a variety of biological indicators of soil quality such as soil enzyme activities, basal and substrate-induced respiration, potentially mineralizable nitrogen, and community level physiological profiles. EDTA was much more efficient than EDDS for the enhancement of root Pb uptake and root-to-shoot Pb translocation. In a soil polluted with 5000 mg Pb kg(-1), as a result of the addition of 1 g EDTA kg(-1) soil, a value of 1332 mg Pb kg(-1) DW shoot was obtained. EDDS application resulted in a shoot Pb accumulation of only 310 mg kg(-1)DW. Plants treated with EDDS showed lower values of biomass than those treated with EDTA. EDDS proved to be rapidly degraded, and less toxic to the soil microbial community in control non-polluted soils. Pb-polluted EDDS-treated soils showed significantly higher values of basal and substrate-induced respiration than those treated with EDTA. Although EDDS had a lower capacity to enhance Pb phytoextraction than EDTA, it has the advantage of rapid biodegradation.     

Characterization of nitrogen-fixing cyanobacteria in the Brazilian Amazon floodplain

The diversity of the free-living nitrogen-fixing cyanobacterial community in the floodplain sediments along the Solimões and Amazon Rivers and some of their tributaries (Japurá, Negro and Madeira) was investigated. Five cyanobacterial genera were morphologically identified, four of which (Nostoc, Calothrix, Cylindrospermum and Fischerella) have not previously been isolated from the Brazilian Amazon floodplain. Nostoc strains were the most commonly found heterocyst-forming cyanobacteria. Five strains (N. muscorum CENA18 and CENA61, N. piscinale CENA21, Cylindrospermum sp. CENA33 and Fischerella sp. CENA19) were selected for growth measurement, ability to fix N₂ and phylogenetic analysis, based on their widespread distribution and morphological distinction. Molecular analyses employing 16S rRNA sequences indicated that some of the isolates may represent novel cyanobacterial species. Dinitrogen fixed by these strains was measured indirectly as acetylene reduction activity and ranged from 11.5 to 22.2 nmol C₂H₄ μg Chl a⁻¹ h⁻¹. These results provide evidence of widespread and importance of nitrogen-fixing cyanobacteria as a source of N inputs in the Amazonian ecosystem.     

Rapid and direct estimation of active biomass on granular activated carbon through adenosine tri-phosphate (ATP) determination

Granular activated carbon (GAC) filtration is used during drinking water treatment for the removal of micropollutants such as taste and odour compounds, halogenated hydrocarbons, pesticides and pharmaceuticals. In addition, the active microbial biomass established on GAC is responsible for the removal of biodegradable dissolved organic carbon compounds present in water or formed during oxidation (e.g., ozonation and chlorination) processes. In order to conduct correct kinetic evaluations of DOC removal during drinking water treatment, and to assess the state and performance of full-scale GAC filter installations, an accurate and sensitive method for active biomass determination on GAC is required. We have developed a straight-forward method based on direct measurement of the total adenosine tri-phosphate (ATP) content of a GAC sample and other support media. In this method, we have combined flow-cytometric absolute cell counting and ATP analysis to derive case-specific ATP/cell conversion values. In this study, we present the detailed standardisation of the ATP method. An uncertainty assessment has shown that heterogeneous colonisation of the GAC particles makes the largest contribution to the combined standard uncertainty of the method. The method was applied for the investigation of biofilm formation during the start-up period of a GAC pilot-scale plant treating Lake Zurich water. A rapid increase in the biomass of up to 1.1 x 10(10)cells/g GAC dry weight (DW) within the first 33 days was observed, followed by a slight decrease to an average steady-state concentration of 7.9 x 10(9)cells/g GAC DW. It was shown that the method can be used to determine the biomass attached to the GAC for both stable and developing biofilms.