Polymorphism in Gd2Ge2O7 ceramics: Structural,vibrational, and optical features

In this work, Gd₂Ge₂O₇ polymorphs were obtained by solid-state reactions at 1100–1300 °C. Structural and vibrational features were investigated by X-ray diffraction and Raman spectroscopy. For the triclinic (space group P1) polymorph, all the predicted phonons were discerned in perfect agreement with the group theory calculations, while for the tetragonal polymorph (space group P4₁2₁2), 53 bands of the 81 predicted modes could be identified and characterized. The Gd³⁺ 4f-4f electronic transitions were investigated by diffuse reflectance spectroscopy in the range 200–340 nm. By applying the Kubelka-Munk function, it was possible to determine the bandgap values for all ceramics studied. The tetragonal polymorph exhibited higher bandgap values (5.88 eV) than the triclinic one (5.59 eV), which are both more energetic than other pyrochlore polymorphs reported in the literature. The results indicate that the presence of polymorphism in Gd₂Ge₂O₇ ceramics can be used to produce tailor-made materials since their crystal structures have a strong influence on their optical properties. Consequently, these properties could be used to tuning the optical properties of Gd-containing materials to sensitize and transfer energy to other luminescent lanthanide ions, aiming for innovative applications.     

Antifungal and antimycotoxigenic effects of Zingiber officinale,Cinnamomum zeylanicum and Cymbopogon martinii essential oils against Fusarium verticillioides

ABSTRACT

There is an increasing demand for fungi control in grains, especially toxigenic. Also, there is growing concern on the use of synthetic fungicides; thus alternatives are needed. The aim of this study was to evaluate the antifungal and antimycotoxigenic action of essential oils (EOs) from Zingiber officinale, Cinnamomum zeylanicum and Cymbopogon martinii against Fusarium verticillioides, a spoilage and toxigenic fungus. Essential oils were first chemically characterised by gas chromatography coupled to mass spectrometry, and their antioxidant potential was measured by the DPPH, ABTS and FRAP methods. Minimum inhibitory concentration (MIC) and disc diffusion were used to assess antifungal activity. Scanning electron microscopy was used to evaluate morphological changes in the fungus. Antimycotoxigenic activity of the EOs against the production of fumonisin B₁ and B₂ by F. verticillioides was evaluated using ultra-high-performance liquid chromatography system. Z. officinale, C. zeylanicum and C. martinii EOs were predominantly composed by zingiberene and geranial; eugenol; and geraniol, respectively. All the EOs had high antioxidant power, especially that from C. zeylanicum. The MICs were 250, 500 and 2,000 µg mL^?1 for C. zeylanicum, C. martinii and Z. officinale EOs, respectively. Mycelial reduction of F. verticillioides was observed when EOs were used, and the lowest activity was detected in the Z. officinale EO. Overall, the tested EOs promoted structural damage to the fungal cell wall, decreased conidia size and mycelial reduction. Antimycotoxigenic evaluation of the EOs evidenced a significant reduction (p < .05) in the production of fumonisins B₁ and B₂ with all the EOs evaluated in the study. These results suggest that especially C. zeylanicum and C. martinii EOs are highly useful for controlling F. verticillioides and fumonisins production.     

Vacuum impregnation of chitosan‐based edible coating in minimally processed pumpkin

The goal of this research was to evaluate the use of vacuum impregnation (VI) and soaking techniques (ST) in the application of edible coatings of chitosan and chitosan + lauric acid to minimally processed pumpkins (MPP). The vacuum impregnation method led to greater component incorporation (5.9% and 1.75%, respectively) in the pumpkins when compared to soaking and consequently the formation of more uniform, thicker coatings (25.6 and 22.3 μm, respectively). However, VI caused greater changes in pH, acidity, colour and firmness. Relating to water content and carotenoid content, noncoated pumpkins presented greater losses during the storage period, regardless of impregnation method. The pumpkins with edible coatings, regardless of method, presented lower numbers of psychrotrophic micro‐organisms and coliforms during the storage period. Therefore, soaking was considered the best method for the application of chitosan‐based edible coatings to minimally processed pumpkins, as it led to smaller changes in the properties of the product.     

Tribocorrosion and corrosion behavior of stainless steel coated with DLC films in ethanol with different concentrations of water

There has been a recent increase in both the production and consumption of ethanol due to the numerous environmental advantages that it offers, such as the fact that it can be produced from a variety of renewable materials, for instance corn and cellulose, or it can be obtained from sugarcane bagasse and biomass (2nd and 3rd generation ethanol). The result of this is that nowadays ethanol is widely seen as the dominant biofuel – or as a blend component in gasoline or pure fuel - in many countries.However, one disadvantage of the use of ethanol is the high corrosive behavior that occurs when its hygroscopic properties are exposed to a large number of materials. Xiaoyuan Lou and Preet Singh showed that the increase of water concentration in ethanol induces pitting and metal loss. Diamond-Like Carbon (DLC) films may be a solution to this problem due to the fact that they can be deposited inside tubes, offer good protection levels against corrosion, and reduce the friction coefficient and wear.This paper shows the tribocorrosion and corrosion studies of DLC films deposited on stainless steel grade 304 (SS304) substrates in order to gauge its appropriateness usage in the construction of pipelines and fuel storage tanks. The surface morphology was analyzed before and after 14 days of immersion. The tribocorrosion, friction coefficient, and wear rate were studied in ethanol to see the effects of water concentration. The films showed good adherence to the substrates. Corrosion and tribocorrosion results showed that for bare Stainless Steel 304 the increase of the water content increases the corrosion and the friction coefficient. DLC coated samples presented few points of delamination, and the friction coefficient and open circuit potentials were very low compared with the bare sample which was water concentration independent.     

Morphological description of the immature stages of Hermetia illucens (Linnaeus, 1758) (Diptera: Stratiomyidae)

In the dipteran genus Hermetia, only 6 of the 78 valid species have documented immature stages: H. albitarsis Fabricius, 1805, H. aurata Bellardi, 1859, H. concinna Williston, 1900, H. illucens (Linnaeus, 1758), H. panamensis Greene, 1940 and H. pulchra Weidemann, 1830. In particular, H. illucens stands out due to its reported applicability for forensic, medical and economic purposes. Here, we described the morphology of eggs and immature stages of this species, with a view to detecting differences between instars and in the pupal stage, which should eventually help properly identifying larval age. We utilized both optical and scanning electron microscopy tools. The eggs are elliptical and elongated, and color varies from cream white to yellowish. The larvae are apodal, hemichephalic and holopneustic, flattened dorso‐ventrally and may be recognized by the head elongated, dorsal and ventral chaetotaxy of the cephalic capsule, thoracic and abdominal segments, and the morphology of the anterior and posterior spiracles. The pupae are adecticous and coarctate, tegument dark brown and pruinescence varying from brown to golden. The overall morphology across instars is similar, but marked variations were observed in the shape of the antennal articuli and the shape of the setae (first instar compared to the others). Our results supplement the biological information on Hermetia illucens and should aid the proper identification and aging of juveniles in the field, as a way to minimize errors in the calculation of the post‐mortem interval.     

The use of bio-diesel based additive as rheology improver and pour point depressant of Nigerian waxy crude

The chemical method has proved to be the most effective mitigating method of wax deposition in petroleum system as it deals with the root cause of wax formation. Most of the commercial chemicals in the industry are very expensive and toxic. This paper aims the use of biodiesel based additives for improving the rheological behavior and pour points of waxy crude from Nigeria field. The biodiesels derived additives gave better performance than the commercial chemical and the seed oils as greatly improvement in rheology and pour point values of the waxy crude were observed