Effect of Co,Pd and Pt ultra-thin films on the Ni-silicide formation: investigating the sandwich configuration

The effect of Co, Pd and Pt ultrathin films on the kinetics of the formation of Ni-silicide by reactive diffusion is investigated. 50 nm Ni/1 nm X/ 50 nm Ni (X?=?Co, Pd, Pt) deposited on Si(100) substrates are studied using in-situ and ex-situ measurements by X-ray diffraction (XRD). The presence of Co, Pd or Pt thin films in between the Ni layers delays the formation of the metal rich phase compared to the pure Ni/Si system and thus these films act as diffusion barriers. A simultaneous silicide formation (δ-Ni₂Si and NiSi phases) different from the classic sequential formation is found during the consumption of the top Ni layer for which Ni has to diffuse through the barrier. A model for the simultaneous growth in the presence of a barrier is developed, and simulation of the kinetics measured by XRD is used to determine the permeability of the different barriers. Atom probe tomography (APT) of the Ni/Pd/Ni system shows that the Pd layer is located between the Ni top layer and δ-Ni₂Si during the silicide growth, in accordance with a silicide formation controlled by Ni diffusion through the Pd layer. The effect of the barrier on the silicide formation and properties is discussed.

     

Piezoelectricity of the Transmembrane Protein ba3 Cytochrome c Oxidase

Controlling the electromechanical response of piezoelectric biological structures including tissues, peptides, and amino acids provides new applications for biocompatible, sustainable materials in electronics and medicine. Here, the piezoelectric effect is revealed in another class of biological materials, with robust longitudinal and shear piezoelectricity measured in single crystals of the transmembrane protein ba₃ cytochrome c oxidase from Thermus thermophilus. The experimental findings from piezoresponse force microscopy are substantiated using a range of control measurements and molecular models. The observed longitudinal and shear piezoelectric responses of ≈ 2 and 8 pm V⁻¹, respectively, are comparable to or exceed the performance of commonly used inorganic piezoelectric materials including quartz, aluminum nitride, and zinc oxide. This suggests that transmembrane proteins may provide, in addition to physiological energy transduction, technologically useful piezoelectric material derived entirely from nature. Membrane proteins could extend the range of rationally designed biopiezoelectric materials far beyond the minimalistic peptide motifs currently used in miniaturized energy harvesters, and the finding of robust piezoelectric response in a transmembrane protein also raises fundamental questions regarding the molecular evolution, activation, and role of regulatory proteins in the cellular nanomachinery, indicating that piezoelectricity might be important for fundamental physiological processes.     

Courses Based on iGEM/BIOMOD Competitions Are the Ideal Format for Research-Based Learning of Xenobiology

Synthetic biology and especially xenobiology, as emerging new fields of science, have reached an intellectual and experimental maturity that makes them suitable for integration into the university curricula of chemical and biological disciplines. Novel scientific fields that include laboratory work are perfect playgrounds for developing highly motivating research-based teaching modules. We believe that research-based learning enriched by digital tools is the best approach for teaching new emerging essentials of academic education. This is especially true when the scientific field as such is still not canonized with text books and best-practice examples. Our experience shows that iGEM/BIOMOD competitions represent an excellent basis for designing research-based courses in xenobiology. Therefore, we present a report on “iGEM–Synthetic Biology” offered at the Technische Universität Berlin as an example.     

A radiomics pipeline dedicated to Breast MRI: validation on a multi-scanner phantom study

Magnetic Resonance Materials in Physics, Biology and Medicine - Quantitative analysis in MRI is challenging due to variabilities in intensity distributions across patients, acquisitions and...     

Comparison of γ-aminobutyric acid accumulation capability in different mung bean (Vigna radiata L.) varieties under heat and relative humidity treatment,and its correlation with endogenous amino acids and polyamines

In this study, the accumulation of GABA and its inherent factors across different varieties of mung bean (Vigna radiata L.) in response to heat and relative humidity (HRH) were investigated. Results showed the average GABA content in mung bean varieties was increased 7.52 times following HRH treatment, and the black mung bean variety (A8) exhibited the highest GABA accumulation capability (1.76–84.57 mg per 100 g DW). From the perspective of GABA shunt metabolites, the free glutamic acid content of mung beans significantly decreased (P < 0.05) after HRH treatment and presented a significant correlation (P < 0.05) with GABA content. In polyamine degradation pathway, although the average levels of spermine and spermidine of mung bean varieties significantly decreased (P < 0.05) after HRH treatment, no significant correlation with GABA content was identified. Hence, the GABA accumulation was predominantly attributed to GABA shunt. Besides, free amino acids including glutamic acid, serine, ornithine, arginine and glycine in mung beans showed a significant positive correlation (P < 0.05) with GABA content and increment following HRH treatment, which suggested that mung beans enriched in these free amino acids might accumulate higher amounts of GABA after HRH treatment and be useful for industrial applications.     

Enhancing the Yield Stress in Liquid Polydimethylsiloxane to Allow Its 3D Printing: Hydrogels as Removable Fillers

For manufacturing parts of very soft materials by liquid deposition modeling (e.g., to mimic living soft tissues), formulations of 3D-printable polydimethylsiloxane have been developed, with the aim of increasing the yield stress of the liquid and reducing the final mechanical modulus. In the present work, suspensions of solid-like hydrogel particles, which are easily 3D-printable, are prepared in order to generate yield stress, and the suspended phase is removed after manufacturing by taking advantage of the thermo-reversibility of the hydrogel behavior, resulting in porosity, which reduces the final rigidity. The reported approach is even more efficient than a previous approach based on emulsion formulations.     

Rapid Synthesis and Antiproliferative Properties of Polyazamacrocycle-Based Bi- and Tetra-Gold(I) Phosphine Dithiocarbamate Complexes

A family of bi- and tetrametallic gold(I) phosphine dithiocarbamate complexes were synthesized, starting from cyclam and dimethylcyclam polyazamacrocycles, respectively, along with their monometallic gold(I) chloridophosphine precursors. Their antiproliferative properties were evaluated on two cancer cell lines (A549 and NSCLC-N6-L16). Most of the mono- and bimetallic complexes displayed strong activities and, in particular, one bimetallic derivative showed antiproliferative properties in the low micromolar range. Insights into the structure–activity relationships are given, along with determination of the thioredoxin reductase inhibition potential, two-photon imaging of the fluorescent derivatives, and evaluation of gold uptake.