Investigation of using possibility of grape pomace in wafer sheet for wheat flour substitution

In this study, grape pomace (GP), a by-product consisting of grape skins and seeds rich in dietary fibres and polyphenols, was used in wafer sheets at different concentrations [5.00 (GP5), 10.0 (GP10), and 15.0 g 100 g⁻¹ (GP15)] for the partial replacement of wheat flour (WF) and improve the functionality of wafer sheets. The GP inclusion at concentrations higher than 5.00 g 100 g⁻¹ significantly affected the texture of sheets as well as the flow behaviour of batters, resulting in softer sheets and more viscous batters (P < 0.05). Moisture contents did not significantly change after GP addition (P > 0.05). After the addition of GP, the L* values decreased and the a* values increased, making the wafers darker (P < 0.05). Moreover, under simulated in vitro digestion conditions, the bioaccessibility of total phenolic compounds in saliva, gastric juice, and intestinal juice was significantly higher than control even at the lowest GP concentration (P < 0.05). Regarding sensory properties, only smoothness and crispness were significantly affected by GP addition, and samples were found to be crisper with higher concentrations of GP. In conclusion, it is possible to partially replace the WF in wafers with GP at a concentration of 5.00 g 100 g⁻¹ to develop a product with higher functionality and nutrient content.     

Utilising grape juice processing by-products as bulking and colouring agent in white chocolate

In this study, grape pomace (mixture of grape seeds and skins) powder (GPP), obtained from grape processing, was used at different concentrations [10.0 (GPP10), 20.0 (GPP10) and 30.0 (GPP10) g/100 g] in white chocolate formulation for the partial replacement of sucrose. The results indicated that GPP addition at a higher concentration (>10.0 g/100 g) significantly affected the particle size, moisture content, texture and flow behaviour of white chocolate samples (P < 0.05). However, using GPP at a concentration of 10.0 g/100 g had advantages for physicochemical and flow properties. As expected, under simulated in vitro digestion conditions, the bioaccessibility of total phenolic compounds in saliva, gastric juice and intestinal juice for GPP10 samples was significantly higher than the control (P < 0.05). In conclusion, results of the study showed that it was possible to partially replace the sucrose with GPP at a concentration of 10.0 g/100 g in white chocolate formulations.     

Depassivation and repassivation of stainless steels by stepwise pH change

Immersion tests with different stainless steels have been performed, while the pH was stepwise decreased and then increased again. During 8.5-day exposure, the depassivation and repassivation pH values as a function of pitting resistance equivalent number were determined. There is always a gap between both pH values (depassivation and repassivation), indicating that for every steel, there are conditions where an existing passive layer can be maintained but cannot be rebuilt after depassivation. In such environments, the passive layer is thicker, consisting mainly of molybdenum and iron rich oxides, while chromium is dissolved. Usually, depending on conditions, the passive layer is more chromium-rich, especially the inner layer. This is relevant, for example, for acidizing jobs in oil and gas industry, proving that repassivation after acidizing will happen promptly, when the pH is increased again.     

Porous polyurethane film fabricated via the breath figure approach for sustained drug release

The breath figure (BF) method is an effective process for fabricating porous polymeric films. In this study, we fabricated porous polymer films from thermoplastic polyurethane (PU) through static BF with CHCl₃ as a solvent under 55–80% relative humidity. The porous PU films were prepared within various pore structures and sizes, which were adjustable, depending on the fabrication conditions. The humidity and exposure time were examined as variable parameters affecting the surface morphology, wettability, and cytotoxicity. Atorvastatin calcium, a hyperlipidemic agent, was loaded into the porous films during the casting process, and the drug-loading and drug-releasing behaviors of the porous PU membranes were evaluated. Approximately 60–80% of the drug was released in 14 days. The films exhibited sustained drug-release performances because of the hydrophobicity and nonbiodegradable nature of PU for perivascular drug administration. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47658.     

Sibs diagnosed prenatally with situs inversus totalis, renal and pancreatic dysplasia, and cysts: a new syndrome?

We describe two sib fetuses with situs inversus, cystic dysplastic kidney and pancreas, bowing of the lower limbs and clavicles, severe intrauterine growth retardation (IUGR), and oligohydramnios. Early prenatal diagnosis of pancreatic and dysplastic renal cysts and situs inversus totalis were made in the 18-week-old fetus. This syndrome differs from that of Ivemark and related syndromes because of the presence of situs inversus totalis and absence of hepatic fibrosis and cysts. The parents were first cousins, and did not have any cysts of kidney, liver, or pancreas detected by ultrasonography.     

Durchsatzverhalten von Hohlkegeldüsen

A semi empirical relationship is proposed for swirl nozzle discharge coefficients. It considers the theoretical background and is matched to an extended own experimental database and to data from manufacturers of industrial nozzles. The equation considers the liquid viscosity and can be used for very different nozzle designs.     

Plasma polymerization‐modified bacterial polyhydroxybutyrate nanofibrillar scaffolds

The design and the development of novel scaffold materials for tissue engineering have attracted much interest in recent years. Especially, the prepared nanofibrillar scaffold materials from biocompatible and biodegradable polymers by electrospinning are promising materials to be used in biomedical applications. In this study, we propose to produce low‐cost and cell‐friendly bacterial electrospun PHB polymeric scaffolds by using Alcaligenes eutrophus DSM 545 strain to PHB production. The produced PHB was characterized by Nuclear Magnetic Resonance (NMR) and Fourier Transform Infrared Spectroscopy (FTIR). Nanofibrous scaffolds were fabricated via electrospinning method that has a fiber diameter approximately 700–800 nm. To investigate cell attachment, cell growth, and antioxidant enzyme activity on positively and negatively charged PHB scaffold, PHB surface was modified by plasma polymerization technique using polyethylene glycol (PEG) and ethylenediamine (EDA). According to the results of superoxide dismutase (SOD) activity study, PEG‐modified nanofibrillar scaffolds indicated more cellular resistance against oxidative stress compared to the EDA modification. As can be seen in cell proliferation results, EDA modification enhanced the cell proliferation more than PEG modification, while PEG modification is better as compared with nonmodified scaffolds. In general, through plasma polymerization technique, surface modified nanofibrillar structures are effective substrates for cell attachment and outgrowth. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013