Basic Oxygen Furnace: Assessment of Recent Physicochemical Models

Metallurgical and Materials Transactions B - Modeling of the basic oxygen furnace (BOF) process, both for online monitoring and fundamental research, has gained importance in steelmaking industry...     

Field Performance of High Oleic Soybeans with Mutant FAD2-1A and FAD2-1B Genes in Tennessee

Soybean [Glycine max (L.) Merr.] oil with high oleic acid (>75%) has increased oxidative stability and health benefits that are valuable for food, fuel, and industrial products. It has been determined that two naturally occurring mutations in genes FAD2-1A and FAD2-1B can combine to produce high oleic soybeans. The objective of this study was to test the effect of these mutant alleles on seed yield and oil and protein concentration. Molecular markers assisted in the creation of a population of 48 BC₃F_2:4 lines (93.75% expected genome commonality). Each line was classified into one of four genotypic groups where both FAD2-1A and FAD2-1B genes were either homozygous wild type or mutant, respectively. Twelve lines for each genotypic group were evaluated in three replications at six locations across Tennessee. There was no seed yield difference between the high oleic genotypic group and the other groups (P < 0.05). On the other hand, there were differences in fatty acid profiles and oil and protein concentrations. In combination, the mutant FAD2-1A and FAD2-1B alleles produced a mean of 803.1 g kg⁻¹ oleic acid. This is, on average, approximately 500 g kg⁻¹ more oleic acid compared to soybean lines with only one mutant FAD2-1 allele. The high oleic double mutant group had more total oil (228.0 g kg⁻¹) and protein (401.0 g kg⁻¹) compared to all other genotypic groups (P < 0.05). Overall, this specific combination of mutant FAD2-1A and FAD2-1B alleles appears to generate conventional high oleic soybeans without a yield drag.     

Investigation of Origin of Attached Cu-Ag Droplets to Solid Particles During High-Temperature Slag/Copper/Spinel Interactions

Metallurgical and Materials Transactions B - This study investigates the origin of mechanically entrained metal droplets in liquid slag due to their interaction with solid spinel particles. Two...     

Effect of gamma irradiation on structural,morphological and optical properties of thermal spray pyrolysis deposited CuO thin film

This study reports the influences of gamma irradiation (GI) in the range of 20–100 kGy on CuO thin films via thermal spray pyrolysis technique on the glass substrates. The results demonstrate significant influences of GI on the crystallographic, microstructural and optical characteristics of CuO thin films. The obtained XRD results showed that the crystallinity of the films deteriorates by gradually decreasing crystallite size (from 59.13 to 46 nm) as applied gamma doses increases. However, the basic monoclinic crystal structure remains same. The dislocation density and lattice strain increased with the rise of GI absorbed dose due to the creation of defects. The values of number of crystallites per unit surface area increased as dose increased indicating the abundance of crystallization of nano CuO thin films. A UV–Vis–NIR spectrophotometer was utilized to determine the optical properties and obtained results indicated that the optical energy band gap (OBG) energies reduced from 2.00 to 1.72 eV as the doses increased from 0 to 100 kGy. No distinctions of the monoclinic phase of virgin CuO thin film have been perceived under applied absorbed doses, notwithstanding the slight deterioration of the crystallinity and narrowing the OBG.     

Influence of high power ultrasound on physical–chemical properties of polypropylene films aimed for food packaging: barrier and contact angle features

Investigation was focused on the impact of high power ultrasound (HPUS), also called thermosonication, on the oxygen permeation properties (permeability, solubility and diffusion coefficients) of barrier films aimed for food packaging. For this purpose, biaxially oriented polypropylene (BOPP) coated with acrylic/polyvinylidene chloride (BOPPAcPVDC) and biaxially oriented coextruded polypropylene (BOPPcoex) were used. The physical–chemical profile of the samples was determined using goniometry. There is a significant impact only of extreme HPUS conditions (the longest time and the highest amplitude) on the permeability, solubility and diffusion coefficients of oxygen through the BOPP films. The highest influence on the oxygen permeability in both investigated BOPP samples involved an HPUS with an amplitude of 100% during a 6 min treatment. However, BOPP samples showed different sensitivities at lower HPUS treatments. © 2017 Society of Chemical Industry     

The Impact of Zeta Potential and Physicochemical Properties of TiO2‐Based Nanocomposites on Their Biological Activity

The aim of this research was to observe the relationship between zeta potential, morphology, surface area, porosity, chemical composition, and ecotoxicity of nanocomposite powders such as Au/TiO₂, Ag₂O/TiO₂, PdO/TiO₂, Ag/TiO₂/SiO₂, Ag/N(C)TiO₂, and SiO₂/TiO₂ from which Ag₂O/TiO₂, Ag/N(C)/TiO_2, and Ag/TiO₂/SiO₂ were exhibiting good antimicrobial properties. It was observed, that nanomaterials characterized by similar morphology and zeta potential revealed the similar toxic behavior. The samples of higher agglomeration and higher zeta potential, especially Ag/TiO₂/SiO₂ xerogel and TiO₂/SiO₂ aerogel were generally less ecotoxic to water organisms and plants. They were also not genotoxic in concentrations up to 500 and 250 mg/L, respectively.     

Tribological Properties and Film Formation Behavior of Thermoreversible Gel Lubricants

The tribological properties of a new and unique thermoreversible gel lubricant (TR gel lube) were investigated. TR gel lube, which includes 10–40% of amide-type gelling agent in base fluid, is able to repeatedly alter or convert phase from gel state to liquid state at the melting point of the gelling agent. High-pressure rheological tests were performed in order to characterize the behavior of base oil and TR gel lube as a function of pressure and temperature. The effect of TR gel lube on ball bearing fatigue life was carried out by systematic tests using thrust ball bearings. The results of L ₁₀ life tests of TR gel lube showed a longer life than the conventional greases. This result was investigated from the oil film formation. It was found that the gelling agent played a key role in the lubricating properties. Some mechanisms such as adsorbed film formation and solid-like formation are proposed.     

Physical and psychic imprisonment and the curative function of self-cutting.

As self-cutting becomes prevalent in Western culture, standard psychophysiological and trauma-related conceptualizations fall increasingly short in capturing the compelling quality behind this deep, tenacious, and powerful behavior. A variety of psychoanalytic perspectives can be developed to explain why individuals cut themselves, and this article offers a current relational view that reconceptualizes the phenomenon of self-mutilation as a curative effort in the face of physical or psychic imprisonment and the suffocation of personal agency. Qualitative research data gathered from a population of women in areas of Turkey highly influenced by traditional values as well as clinical cases with 2 American patients are discussed to extract the common symbolic meanings ascribed to this act by individuals from different cultural and personal backgrounds. The Turkish participants' straightforward and concrete explanations of why they cut themselves and their accounts of the real and ongoing oppression they experience are used to shed light on Western women's subjective experience of psychic imprisonment and to understand the perhaps universal function of self-mutilation as an attempt to have an impact on the relational world and reclaim personal agency. (PsycINFO Database Record (c) 2011 APA, all rights reserved)