Electrically controlled release of 5-fluorouracil from conductive gelatin methacryloyl-based hydrogels

Herein, electro-responsive hydrogels were obtained by incorporation of poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT/PSS) into the gelatin methacryloyl (GelMA) by using photopolymerization technique. Hydrogels were characterized by FTIR and scanning electron microscopy analyses. Cytotoxicity tests were performed by L929 cell lines to determine cell compatibility. Swelling tests were conducted to investigate the water uptake capacity of hydrogels. 5-fluorouracil (5-FU) was selected as a model drug as it is known as a topical drug for some skin cancer type treatment. The release of 5-FU from the hydrogel was provided in efficient and controlled manner at simulated skin cancer (pH = 5.5) and under 0 and 1.5 V. The simulated drug delivery experiments conducted in vitro revealed that the drug releasing amount was higher when voltage is applied to the hydrogels. All results visualized that the obtained GelMA-based PEDOT/PSS hydrogels with enhanced electrical properties could be a potential candidate as an electrically sensitive drug carrier for treatment of skin cancer in the future applications. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 46914.     

Synthesis and spectroelectrochemistry of dithieno(3,2‐b:2′,3′‐d)pyrrole derivatives

New π‐conjugated polymers containing dithieno(3,2‐b:2′,3′‐d)pyrrole (DTP) were successfully synthesized via electropolymerization. The effect of structural differences on the electrochemical and optoelectronic properties of the 4‐[4H‐dithieno(3,2‐b:2′,3′‐d)pyrrol‐4‐yl]aniline (DTP–aryl–NH₂), 10‐[4H‐dithiyeno(3,2‐b:2′,3′‐d)pirol‐4‐il]dekan‐1‐amine (DTP–alkyl–NH₂), and 1,10‐bis[4H‐dithieno(3,2‐b:2′,3′‐d)pyrrol‐4‐yl] decane (DTP–alkyl–DTP) were investigated. The corresponding polymers were characterized by cyclic voltammetry, NMR (¹H‐NMR and ¹³C‐NMR), and ultraviolet–visible spectroscopy. Changes in the electronic nature of the functional groups led to variations in the electrochemical properties of the π‐conjugated systems. The electroactive polymer films revealed redox couples and exhibited electrochromic behavior. The replacement of the DTP–alkyl–DTP unit with DTP–aryl–NH₂ and DTP–alkyl–NH₂ resulted in a lower oxidation potential. Both the poly(10‐(4H‐Dithiyeno[3,2‐b:2′,3′‐d]pirol‐4‐il)dekan‐1‐amin) (poly(DTP–alkyl–NH₂)) and poly(1,10‐bis(4H‐dithieno[3,2‐b:2′,3′‐d]pyrrol‐4‐yl) decane) (poly(DTP–alkyl–DTP)) films showed multicolor electrochromism and also fast switching times (<1 s) in the visible and near infrared regions. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40701.     

Preparation and evaluation of linseed oil based alkyd paints

Alkyd resins are produced with reaction of oil or fatty oil, polyol and polyacid. Alkyd resins are commonly used in coating and paint industry due to ease of application in changing environmental conditions. Linseed oil based paints executed all requirements of technical properties, drying time, storage properties, simplicity in maintenance, appearance, economy, etc. In this study, linseed oil based alkyd resins having different oil contents were synthesized     

A multinomial logit analysis of risk factors influencing road traffic injury severities in the Erzurum and Kars Provinces of Turkey

A retrospective cross-sectional study is conducted analysing 11,771 traffic accidents reported by the police between January 2008 and December 2013 which are classified into three injury severity categories: fatal, injury, and no injury. Based on this classification, a multinomial logit analysis is performed to determine the risk factors affecting the severity of traffic injuries. The estimation results reveal that the following factors increase the probability of fatal injuries: drivers over the age of 65; primary-educated drivers; single-vehicle accidents; accidents occurring on state routes, highways or provincial roads; and the presence of pedestrian crosswalks. The results also indicate that accidents involving cars or private vehicles or those occurring during the evening peak, under clear weather conditions, on local city streets or in the presence of traffic lights decrease the probability of fatal injuries. This study comprises the most comprehensive database ever created for a Turkish sample. This study is also the first attempt to use an unordered response model to determine risk factors influencing the severity of traffic injuries in Turkey.     

Influence of nanoadditives on ignition characteristics of Kusum (Schleichera oleosa) biodiesel

Biodiesel obtained from inedible sources emerged as a productive approach in Indian energy scenario due to the scarcity of food resources come up with extensive usage of edible crops. Kusum (Schleichera oleosa) oil is abundantly available in India and can be used as feedstock to produce biodiesel. However, issues such as higher viscosity, poor stability, and lower calorific value result in poor ignition characteristics, hence limiting its use in combustion applications. An improvement in performance and emission characteristics can be achieved by doping nanoparticles in Kusum biodiesel (KBD). The present work examines the impact of a metal compound and carbon‐primarily based nanoparticles on the evaporation time and ignition probability of the KBD. During the experimental process, different fuel samples of KBD were prepared by amalgamating nanoparticles; then, a sequence of hot plate (stainless steel) ignition test was conducted on these test fuels. The comparative assessment of neat biodiesel and the biodiesel fuel doped with 30 ppm each of alumina (Al2O3), and multiwalled carbon nanotubes (MWCNTs) nanoparticles were carried out. The Kusum oil was converted to biodiesel using two‐stage transesterification process. In the initial stage, refined oil was gone through the acid catalyst esterification process followed by the transesterification reaction. The prepared methyl ester was confirmed and characterized using GC‐MS technique. The thermophysical and spray properties of the test fuels including density, viscosity, calorific value, cloud/pour point, Sauter mean diameter (SMD), and specific surface area (SSA) were also calculated. The experimental result showed a significant increase in ignition probability and heat conduction properties due to improved surface area/volume ratio. Also, lower evaporation time was noted for metal/carbon‐based nanoparticles doped biodiesel as compared with neat biodiesel.     

Energy Efficient Multitier Random DEC Routing Protocols for WSN: In Agricultural

Wireless Personal Communications - Fog computing is an emerging paradigm that provides confluence facilities between Internet of Things (IoT) devices and cloud. The fog nodes process the...     

In vivo evaluation of a mucoadhesive polymeric caplet for intravaginal anti-HIV-1 delivery and development of a molecular mechanistic model for thermochemical characterization

Context and objective: The aim of this study was to develop, characterize and evaluate a mucoadhesive caplet resulting from a polymeric blend (polymeric caplet) for intravaginal anti-HIV-1 delivery.

Materials and methods: Poly(lactic-co-glycolic) acid, ethylcellulose, poly(vinylalcohol), polyacrylic acid and modified polyamide 6, 10 polymers were blended and compressed to a caplet-shaped device, with and without two model drugs 3′-azido-3′-deoxythymidine (AZT) and polystyrene sulfonate (PSS). Thermal analysis, infrared spectroscopy and microscopic analysis were carried out on the caplets employing temperature-modulated DSC (TMDSC), Fourier transform infra-red (FTIR) spectrometer and scanning electron microscope, respectively. In vitro and in vivo drug release analyses as well as the histopathological toxicity studies were carried out on the drug-loaded caplets. Furthermore, molecular mechanics (MM) simulations were carried out on the drug-loaded caplets to corroborate the experimental findings.

Results and discussion: There was a big deviation between the T_g of the polymeric caplet from the T_g's of the constituent polymers indicating a strong interaction between constituent polymers. FTIR spectroscopy confirmed the presence of specific ionic and non-ionic interactions within the caplet. A controlled near zero-order drug release was obtained for AZT (20 d) and PSS (28 d). In vivo results, i.e. the drug concentration in plasma ranged between 0.012–0.332?mg/mL and 0.009–0.256?mg/mL for AZT and PSS over 1–28 d.

Conclusion: The obtained results, which were corroborated by MM simulations, attested that the developed system has the potential for effective delivery of anti-HIV-agents.