In the present study, 17 wt % TiN reinforced α-β SiAlON composites were sintered at low temperature by susceptor-assisted microwave heating. The effect of TiN addition on dielectrical properties of starting powders, as well as the influence of sintering temperature on phase evolution, microstructure development and mechanical properties of α/β-SiAlON-TiN composites were investigated. The obtained results showed that TiN addition increased the microwave absorbing properties which is reflected in the peak sintering temperature. Thus, the α:β ratio decreased and mechanical properties were improved, especially the fracture toughness of the composites. Furthermore, an estimate of energy consumption during microwave assisted sintering at the laboratory scale is presented. As a result, the highest values for relative density (97.1%), Vickers hardness (13.35 ± 0.47 GPa), and fracture toughness (7.52 ± 0.54 MPa m1/2) were obtained by microwave sintering for 30 min at 1300 °C. 相似文献
In the current work, numerical simulations are achieved to study the properties and the characteristics of fluid flow and heat transfer of (Cu–water) nanofluid under the magnetohydrodynamic effects in a horizontal rectangular canal with an open trapezoidal enclosure and an elliptical obstacle. The cavity lower wall is grooved and represents the heat source while the obstacle represents a stationary cold wall. On the other hand, the rest of the walls are considered adiabatic. The governing equations for this investigation are formulated, nondimensionalized, and then solved by Galerkin finite element approach. The numerical findings were examined across a wide range of Richardson number (0.1 ≤ Ri ≤ 10), Reynolds number (1 ≤ Re ≤ 125), Hartmann number (0 ≤ Ha ≤ 100), and volume fraction of nanofluid (0 ≤ φ ≤ 0.05). The current study's findings demonstrate that the flow strength increases inversely as the Reynolds number rises, which pushes the isotherms down to the lower part of the trapezoidal cavity. The Nuavg rises as the Ri rise, the maximum Nuavg = 10.345 at Ri = 10, Re = 50, ϕ = 0.05, and Ha = 0; however, it reduces with increasing Hartmann number. Also, it increase by increasing ϕ, at Ri = 10, the Nuavg increased by 8.44% when the volume fraction of nanofluid increased from (ϕ = 0–0.05). 相似文献
Neonatal brain and cardiac imaging would benefit from the increased signal-to-noise ratio levels at 7 T compared to lower field. Optimal performance might be achieved using purpose designed RF coil arrays. In this study, we introduce an 8-channel dipole array and investigate, using simulations, its RF performances for neonatal applications at 7 T.
Methods
The 8-channel dipole array was designed and evaluated for neonatal brain/cardiac configurations in terms of SAR efficiency (ratio between transmit-field and maximum specific-absorption-rate level) using adjusted dielectric properties for neonate. A birdcage coil operating in circularly polarized mode was simulated for comparison. Validation of the simulation model was performed on phantom for the coil array.
Results
The 8-channel dipole array demonstrated up to 46% higher SAR efficiency levels compared to the birdcage coil in neonatal configurations, as the specific-absorption-rate levels were alleviated. An averaged normalized root-mean-square-error of 6.7% was found between measured and simulated transmit field maps on phantom.
Conclusion
The 8-channel dipole array design integrated for neonatal brain and cardiac MR was successfully demonstrated, in simulation with coverage of the baby and increased SAR efficiency levels compared to the birdcage. We conclude that the 8Tx-dipole array promises safe operating procedures for MR imaging of neonatal brain and heart at 7 T.
Herein, we report the use of tungsten(VI) oxide (WO3) as support for Rh0 nanoparticles. The resulting Rh0/WO3 nanoparticles are highly active and stable catalysts in H2 generation from the hydrolysis of ammonia borane (AB). We present the results of our investigation on the particle size distribution, catalytic activity and stability of Rh0/WO3 catalysts with 0.5%, 1.0%, 2.0% wt. Rh loadings in the hydrolysis reaction. The results reveal that Rh0/WO3 (0.5% wt. Rh) is very promising catalyst providing a turnover frequency of 749 min?1 in releasing 3.0 equivalent H2 per mole of AB from the hydrolysis at 25.0 °C. The high catalytic activity of Rh0/WO3 catalyst is attributed to the reducible nature of support. The report covers the results of kinetics study as well as comparative investigation of activity, recyclability, and reusability of colloidal(0) nanoparticles and Rh0/WO3 (0.5 % wt. Rh) catalyst in the hydrolysis reaction. 相似文献
Waste or by-products contains a substantial amount of nutrients. Fish silage is an alternative way for assessment of fish discards and waste generated in the fish processing industries. The aim of the study was to evaluate the potential use of discard species (Equulites klunzingeri, marine fish and Carassius gibelio, freshwater fish) for fish silage and chemical quality of fish oil extracted from fish silages prepared with acid and fermented methods. Lipid quality of fish oils extracted from fish silages with LAB strains was evaluated in terms of thiobarbituric acid (TBA), peroxide value (PV), p-Anisidine (AV), totox values and fatty acid composition. The results showed that PV, TBA, AV and totox values of all extracted fish oils were within the acceptable limits for edible oils. Recovered fish oils from silage contained high level of polyunsaturated fatty acids (PUFAs), especially eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), serving as a source of good quality fish oil for human consumption. 相似文献
This study described the anatomy and histology of the male reproductive system in Chrysomela populi, which is an economically important species belonging to the family Chrysomelidae. Therefore, reproductive biology has been studied to combat this insect. As well as, the characters associated with the reproductive tract have been potential to discuss aspects of the system and to better understand the reproductive dynamics. The male reproductive system of C. populi has a pair of testes, a pair of vas efferentia and deferentia, a pair of seminal vesicles, a pair of accessory glands, an ejaculatory bulb, an ejaculatory duct, and an aedeagus. The testis consists of two flower-shaped lobes. Each testis has 20 sperm tubules (testicular follicles) containing cysts of germ cells at various developmental stages within the light orange peritoneal sheath. Testicular follicles are composed of three different (growth, maturation, and differentiation) zones. In the middle region of each testis joins with the vas efferens. The testis is attached to the seminal vesicle by a small stalk like vas efferens. In the lumen of the vas efferens, seminal vesicle, and vas deferens, sperms form clumps in the form of thin threads. The proximal end of the vas deferens is connected to the common ejaculatory duct. It joins with the ejaculatory bulb. Around the ejaculator bulb, there is a pair of convoluted, flat-surface tubular structure accessory glands. Posterior ejaculatory duct joins with the aedeagus. 相似文献