Extraction and characterization of hydroxyapatite-based materials from grey triggerfish skin and black scabbardfish bones

The conversion of food industry by-products to compounds with high added value is nowadays a significant topic, for social, environmental, and economic reasons. In this paper, calcium phosphate-based materials were obtained from black scabbardfish (Aphanopus carbo) bones and grey triggerfish (Balistes capriscus) skin, which are two of the most abundant fish by-products of Madeira Island. Different calcination temperatures between 400 and 1000°C were employed. Materials obtained from calcination of bones of black scabbard fish were composed by homogeneous mixtures of hydroxyapatite (Ca₁₀(PO4)₆(OH)₂, HAp) and β-tricalcium phosphate (β-Ca₃(PO₄)₂, β-TCP). Because of the high biocompatibility of HAp and the good resorbability of β-TCP, these natural biphasic materials could be very relevant in the field of biomaterials, as bone grafts. The ratio between HAp and β-TCP in the biphasic compound was dependent on the calcination temperature. Differently, the material obtained from skin of grey triggerfish contained HAp as the main phase, together with small amounts of other mineral phases, such as halite and rhenanite, which are known to enhance osteogenesis when used as bone substitutes. In both cases, the increase of calcination temperature led to an increase in the particles size with a consequent decrease in their specific surface area. These results demonstrate that from the fish by-products of the most consumed fishes in Madeira Island it is possible to obtain bioceramic materials with tunable composition and particle morphology, which could be promising materials for the biomedical field.     

7-Amidocoumarins as Multitarget Agents against Neurodegenerative Diseases: Substitution Pattern Modulation

This study explores the potential of 7-amidocoumarins as multitarget agents against Parkinson's and Alzheimer's diseases, by modulating the substitution patterns within the scaffold. Sixteen compounds were synthesized via 7-amino-4-methylcoumarin acylation, and in vitro evaluation of the molecules against hMAO-A, hMAO-B, hAChE, hBuChE and hBACE1 was performed. Five compounds turned out to be potent and selective hMAO-B inhibitors in the nanomolar range, six displayed inhibitory activity of hMAO-A in the low micromolar range, one showed hAChE inhibitory activity and another one hBACE1 inhibitory activity. MAO-B reversibility profile of 7-(4’-chlorobenzamido)-4-methylcoumarin ( 10 ) was investigated, with this compound being a reversible inhibitor. Neurotoxicity on motor cortex neurons and neuroprotection against H₂O₂ were also studied, corroborating the safety profile of these molecules. Finally, theoretical ADME properties were also calculated, showing these molecules as good candidates for the optimization of a lead compound. Results suggest that by modulating the substitution pattern at position 7 of the scaffold, selective or multitarget molecules can be achieved.     

Mechanical properties and thermal shock in thin ZrO2–Y2O3–Al2O3 films obtained by the sol-gel method

Thin multilayer coatings of ZrO₂–Y₂O₃–Al₂O₃ were prepared using the sol-gel method and dip-coating technique in order to advance in the study of what influence the incorporation of Al₂O₃ has on films of Y₂O₃-doped ZrO₂, investigating its role in the synthesis of the solutions and in the characteristics and properties of the coatings. After the characterization of the solutions used in the process, the microstructure of the films was studied and their mechanical behaviour and resistance to thermal shock were determined so as to optimize the characteristics and functionality of these coatings. With increased alumina content, 3YSZ-Al₂O₃ (20 mol%), the cubic phase of the zirconia disappeared completely at the sintering temperature used (700 °C), resulting in the tetragonal phase with Al in solution. There was also a decrease in the coatings' hardness and Young's modulus, and an increase in toughness and resistance to thermal shock. These results allow guidelines to be established for the design of multilayer structures that are, tougher, more resistant, and have improved surface properties.     

Vacuum impregnation of chitosan‐based edible coating in minimally processed pumpkin

The goal of this research was to evaluate the use of vacuum impregnation (VI) and soaking techniques (ST) in the application of edible coatings of chitosan and chitosan + lauric acid to minimally processed pumpkins (MPP). The vacuum impregnation method led to greater component incorporation (5.9% and 1.75%, respectively) in the pumpkins when compared to soaking and consequently the formation of more uniform, thicker coatings (25.6 and 22.3 μm, respectively). However, VI caused greater changes in pH, acidity, colour and firmness. Relating to water content and carotenoid content, noncoated pumpkins presented greater losses during the storage period, regardless of impregnation method. The pumpkins with edible coatings, regardless of method, presented lower numbers of psychrotrophic micro‐organisms and coliforms during the storage period. Therefore, soaking was considered the best method for the application of chitosan‐based edible coatings to minimally processed pumpkins, as it led to smaller changes in the properties of the product.     

The generalized discrete ‐centroid problem

The ‐centroid problem or leader–follower problem is generalized considering different customer choice rules where a customer may use facilities belonging to different firms, if the difference in travel distance (or time) is small enough. Assuming essential goods, some particular customer choice rules are analyzed. Linear programming formulations for the generalized ‐medianoid and ‐centroid problems are presented and an exact solution approach is applied. Some computational examples are included.     

Cyanogenic,carotenoids and protein composition in leaves and roots across seven diverse population found in the world cassava germplasm collection at CIAT,Colombia

The objective of this study was to characterise the nutritional potential of leaves and identify a diversity centre with low cyanide and high nutrient content among 178 Latin American cassava genotypes. This field-based collection represents the seven diversity centres, held at The International Center for Tropical Agriculture (CIAT Palmira, Colombia) by the Cassava Program. The cyanide, all-trans-β-carotene and lutein concentrations in cassava leaves ranged from 346 to 7484 ppm dry basis (db), from 174–547 μg g⁻¹ db and 15–181 μg g⁻¹ db, respectively. Cassava leaves also showed significant levels of essential amino acids leucine, lysine, phenylalanine, valine and threonine, and average total protein content of 26.24 g 100 g⁻¹ db. Among seven diversity centres, South American rainforest group showed low cyanide and high carotene content in leaves. In addition, VEN77 and PAN51 genotypes stood out for having low cyanide in leaves and roots and high carotene in leaves. This genetic diversity can be used to select high potential progenitors for breeding purposes.